• Journal of Lipid and Atherosclerosis
• /
• v.7 no.2
• /
• pp.77-87
• /
• 2018

Lowering serum low-density lipoprotein cholesterol (LDL-C) is the mainstay for reduction of risk of cardiovascular disease (CVD), the second most common cause of death in Korea. The 2015 Korean guidelines for management of dyslipidemia strongly recommend the use of statins in patients at risk of CVD. Statin therapy, which is the gold standard for CVD, reduces LDL-C level by 40% to 60% and is generally well tolerated. However, many patients are intolerant to statins and discontinue therapy or become nonadherent to therapy because of actual/perceived side effects. The most common of these side effects is the statin-associated muscle symptom (SAMS). Discontinuation and repetitive re-challenge with statins can help identify SAMS. If serum creatinine kinase level is more than 10 times the upper limit of normal, statin therapy must be stopped immediately, and the physician should identify possible causes including rhabdomyolysis and treat appropriately. In other patients, it might help to switch to a less potent statin or to use statins at intermittent non-daily dosing. To achieve target LDL-C level, non-statin lipid-lowering therapies such as dietary modifications, ezetimibe, and bile acid sequestrants may be added. Several new drugs have recently been approved for lowering LDL-C level. Alirocumab and evolocumab are monoclonal antibodies that inhibit proprotein convertase subtilisin/kexin type 9, and both drugs cause large reductions in LDL-C, similar to statins. Lomitapide and mipomersen are orphan drugs used as adjuncts to other lipid-lowering therapies in patients with homozygous familial hypercholesterolemia.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.93-100
• /
• 2009

This paper presents a step up four channel DC-DC converter using charge pump voltage doubler structure. Our goal is to design and implement DC-DC converter for capacitive SP4T RF MEMS switch in front end module in wireless transceiver system. Charge pump structure is small and consume low power 3.3V input voltage is boosted by DC-DC Converter to $11.3{\pm}0.1V$, $12.4{\pm}0.1V$, $14.1{\pm}0.2V$ output voltage With 10MHz switching frequency. By using voltage level shifter structure, output of DC-DC converter is selected by 3.3V four channel selection signals and transferred to capacitive MEMS devices. External passive devices are not used for driving DC-DC converter. The total chip area is $2.8{\times}2.1mm^2$ including pads and the power consumption is 7.52mW, 7.82mW, 8.61mW.

• Journal of the Korean Society of Radiology
• /
• v.11 no.2
• /
• pp.117-122
• /
• 2017

The purpose of this study is to prevent infection in the hospital by computed radiography portable and to provide basic data on infection-related education by investigating bacterial contamination level of computed radiography portable equipment using IP cassette. The results suggest that IP cassette No. 1 is infected with CNS and VRE, no. 2 with CNS, No. 3 with CNS and Pseudomonas aeruginosa, No. 4 with CNS, No. 5 with CNS and Bacillus sp., and No. 6 with enterococcus faecium. Enterococcus faecium and bacillus sp. were detected from the IP reader and Acinetobacter baumannii was detected on the mobile handle; Bacillus sp. on the control buttons, CNS and Bacillus sp. from the irradiation control handle, Acinetobacter baumannii on the x-ray generation switch, and CNS on the barcode scanner. In addition, Bacillus sp. Acinetobacter baumannii was found on the IP cassette mobile table and CNS and bacillus sp. were found on the lead apron. Acinetobacter baumannii and CNS were detected from the medical gloves worn by a radiological technologist during radiography. This suggests that IP cassette should be sterilized after use as it can hand over bacteria to IP reader and IP mobile table. Medical gloves that are in direct contact with patients should also be replaced after using them once and other supplies such as x-ray generation switch and lead apron should thoroughly be sterilized to prevent infection due to radiography as they are in a lot of contact with patients.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.1
• /
• pp.141-156
• /
• 2008

Market structure analysis is a very useful tool to analyze the competition boundary of the brand or the company. But most of the studies in market structure analysis, the concern lies in nondurable goods such as candies, soft drink and etc. because of the their availability of the data. In the field of durable goods, the limitation of the data availability and the repurchase time period constrain the study. In the analysis of the automobile market, those of views might be more persuasive. The purpose of this study is to analyze the structure of automobile market based on some idea suggested by prior studies. Usually the buyers of the automobile tend to buy upper tier when they buy in the next time. That kind of behavior make it impossible to analyze the structure of automobile market under the level of automobile model. For that reason I tried to analyze the market structure in the brand or company level. In this study, consideration data was used for market structure analysis. The reasons why we used the consideration data are summarized as following. Firstly, as the repurchase time cycle is too long, brand switching data which is used for the market analysis of nondurable good is not avaliable. Secondly, as we mentioned, the buyers of the automobile tend to buy upper tier when they buy in the next time. We used survey data collected in the U.S.A. market in the year of 2005 through questionaire. The sample size was 8,291. The number of brand analyzed in this study was 9 among 37 which was being sold in U.S.A. market. Their market share was around 50%. The brands considered were BMW, Chevrolet, Chrysler, Dodge, Ford, Honda, Mercedes, and Toyota. �� ratio was derived from frequency of the consideration set. Actually the frequency is different from the brand switch concept. In this study to compute the �� ratio, the frequency of the consideration set was used like a frequency of brand switch for convenience. The study can be divided into 2 steps. The first step is to build hypothetical market structures. The second step is to choose the best structure based on the hypothetical market structures, Usually logit analysis is used for the choice best structure. In this study we built 3 hypothetical market structure. They are type-cost, cost-type, and unstructured. We classified the automobile into 5 types, sedan, SUV(Sport Utility Vehicle), Pickup, Mini Van, and Full-size Van. As for purchasing cost, we classified it 2 groups based on the median value. The median value was $28,800. To decide best structure among them, maximum likelihood test was used. Resulting from market structure analysis, we find that the automobile market of USA is hierarchically structured in the form of 'automobile type - purchasing cost'. That is, result showed that automobile buyers considered function or usage first and purchasing cost next. This study has some limitations in the analysis level and variable selection. First, in this study only type of the automobile and purchasing cost were as attributes considered for purchase. Considering other attributes is very needful. Because of the attributes considered, only 3 hypothetical structure could be analyzed. Second, due to the data, brand level analysis was tried. But model level analysis would be better because automobile buyers consider model not brand. To conduct model level study more cases should be obtained. That is for acquiring the better practical meaning, brand level analysis should be conducted when we consider the actual competition which occurred in the real market. Third, the variable selection for building nested logit model was very limited to some avaliable data. In spite of those limitations, the importance of this study lies in the trial of market structure analysis of durable good.

• Advances in Traditional Medicine
• /
• v.5 no.4
• /
• pp.294-300
• /
• 2005

Uncaria Tomentosa and Maytenus are known to have anti-inflammatory and anti-rheumatoidal effects after either a single application or application over a short-term period. We applied these natural products to Wister rats every day for two weeks and investigated the effects of this long-term application on inflammation. This was done by measuring footpad edema, which was induced by a locally injected carrageenan. There was a dramatic reduction in edema in both U. Tomentosa- and Maytenus-treated rats; furthermore, the reduction lasted as long as three days for rats treated with U. Tomentosa. When the Balb/C mice underwent similar treatment for one month, the level of IgM in the blood of U. Tomentosa-treated mice decreased while the level of IgG in Maytenus-treated mice increased. This suggests that the long lasting effects of U. Tomentosa may be related to a low level of IgM and the subclass switch from IgM to IgG. Since the anti-inflammatory effects of U. Tomentosa lasts for three days, it may prove useful in treating rheumatoid arthritis when applied for an extended period of time, especially since this product is known to have minimal side effects.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.4
• /
• pp.571-573
• /
• 2012

Glyceraldehyde-3-phosphate (G-3-P), the substrate of glyceraldehyde-3-phosphate dehydrogenase (GAPDH), is a key intermediate in several metabolic pathways. Recently, we reported that G-3-P directly inhibits caspase-3 activity in a reversible noncompetitive mode, suggesting the intracellular G-3-P level as a cell fate decision factor. It has been known that apoptotic stimuli induce the generation of NO, and NO S-nitrosylates GAPDH at the catalytic cysteine residue, which confers GAPDH the ability to bind to Siah-1, an E3 ubiquitin ligase. The GAPDH-Siah-1 complex is translocated into the nucleus and subsequently triggers the apoptotic process. Here, we clearly showed that intracellular G-3-P protects GAPDH from S-nitrosylation at above a certain level, and consequently maintains the cell survival. In case G-3-P drops below a certain level as a result of exposure to specific stimuli, G-3-P cannot inhibit S-nitrosylation of GAPDH anymore, and consequently GAPDH translocates with Siah-1 into the nucleus. Based on these results, we suggest that G-3-P functions as a molecule switch between cell survival and apoptosis by regulating S-nitrosylation of GAPDH.

• Journal of Biosystems Engineering
• /
• v.20 no.1
• /
• pp.73-86
• /
• 1995

The automatic control system in the greenhouse have to be developed to the direction of considering various factors the variables such as condition of the cultivation and greenhouse, the properties and types of products. Therefore, it is more important to set up variables appropriately than the problems of automatic control system itself, and the automatic control system which satisfy these problems should be simplified in the aspect of operation. In addition, even the individual automations are not perfect yet, so more studies are required for the development of comprehensive automatic system in korea. This study was carried out to automatize environment control systems for greenhouse, especially from most intensive labor requiring parts such as watering, irrigating liquefied fertilizer, spraying chemicals, mixing and ventilation system, etc. The results are summarized as follows. 1. Control type tensiometer was expected to be desirable in the automation of watering system, therefore, a new tensiometer was designed and developed through this study. 2. The chemical spraying system developed through this study was found to be excellent in the aspect of operation. 3. When pulse type water discharge meter was used in the mixing of liquefied fertilizer and chemical solution, the error of mixing were range $\pm$0.1~0.15%. 4. The water level switch of electrod type used for controlling water level was found to be affective in both control performance and operation cost. 5. The water and level control system can be omitted if each tank size are standardized in accordance with greenhouse size, therefore, the installation cost might be significantly reduced. 6. The developed general controller was excellent in hardware parts, but still remained to be improved in software parts.

• Journal of Chest Surgery
• /
• v.30 no.5
• /
• pp.479-485
• /
• 1997

We investigated changes of the size of neoaortic annulus, root, and aortic anastomosis after arterial switch operation for complete transposition of the great arteries performed in infancy. A total of 23 patients were included in this study. Age ranged from 6 to 153 days. Body weight averaged 3.9$\pm$0.8kg and 17 patients were male. The preoperative angiocardiographic dimensions of the pulmonary annulus, the pulmonary root, and the sinotubular junction, standardized to the diameter of descending aorta at the level of diaphragm, were compared to the size of postoperative measurements of the neoaortic annulus, the neoaortic root, and the aortic an stomosis at a mean interval of 17.2$\pm$ 9.4 months. Mean dimensions of the neoaortic annulus and the neoaortic root were significantly increased postoperatively(n=23, annulus; p<0.01, root; p<0.01), however, those of the aortic anastomosis did not reveal significant change(n=23, p=0.06). There were no significant differences in changes of diameters of the neoaortic annulus, the root, and the aortic anastomosis between patients with(n=8) and without(n=15) postoperative neoaortic regurgitation(annulus; p=0.32, root; p=0.29, anastomosis; p=0.86). Postoperative dimensions of the neoaortic root and annulus between patients with ventricular septal defect(n: 10) and without ventricular septal defect(ni 13) were not significantly changed compared to the preoperative measurements(annulus; p=0.09, root; p=0.07) but mean diameters of the aortic anastomosis decreased significantly after operation in patients with ventricular septal defect(p=0.04). This study revealed that the site of the aortic an stomosis grows in proportion to patient's somatic growth after arterial switch operation. Although we could not demonstrate the relation between the aortic root dilatation and the postoperative neoaortic regurgitation in this study, a continuous close follow-up might be necessary to detect a possible progression of the aortic root dilatation and the resulting significant aortic valve regurgitation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.23-23
• /
• 2009

Recently, the nanowire configuration of GST showed nanosecond-level phase switch at very low power dissipation, suggesting that the nanowires could be ideal for data storage devices. In spite of many advantages of IST materials, their feasibility in both thin films and nanowires for electronic memories has not been extensively investigated. The synthesis of the chalcogenide nanowires was mainly preformed via a vapor transport process such as vapor-liquid-solid (VLS) growth at a high temperature. However, in this study, IST nanowires as well as thin films were prepared at a low temperature (${\sim}250^{\circ}C$) by metal organic chemical vapor deposition(MOCVD) method, which is possible for large area deposition. The IST films and/or nanowires were selectively grown by a control of working pressure at a constant growth temperature by MOCVD. In-Sb-Te NWs will be good candidate materials for high density PRAM applications. And MOCVD system is powerful for applying ultra scale integration cell.

• ETRI Journal
• /
• v.25 no.2
• /
• pp.65-72
• /
• 2003

To achieve cost and size reductions, we developed a low cost manufacturing technology for RF substrates and a high performance passive process technology for RF integrated passive devices (IPDs). The fabricated substrate is a conventional 6" Si wafer with a 25${\mu}m$ thick $SiO_2$ surface. This substrate showed a very good insertion loss of 0.03 dB/mm at 4 GHz, including the conductive metal loss, with a 50 ${\Omega}$ coplanar transmission line (W=50${\mu}m$, G=20${\mu}m$). Using benzo cyclo butene (BCB) interlayers and a 10 ${\mu}m$ Cu plating process, we made high Q rectangular and circular spiral inductors on Si that had record maximum quality factors of more than 100. The fabricated inductor library showed a maximum quality factor range of 30-120, depending on geometrical parameters and inductance values of 0.35-35 nH. We also fabricated small RF IPDs on a thick oxide Si substrate for use in handheld phone applications, such as antenna switch modules or front end modules, and high-speed wireless LAN applications. The chip sizes of the wafer-level-packaged RF IPDs and wire-bondable RF IPDs were 1.0-1.5$mm^2$ and 0.8-1.0$mm^2$, respectively. They showed very good insertion loss and RF performances. These substrate and passive process technologies will be widely utilized in hand-held RF modules and systems requiring low cost solutions and strict volumetric efficiencies.