• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1082-1090
• /
• 2005

Jocheong was prepared by adding Lentinus edodes extract to improve its quality and to give some functional properties. Contents of crude protein, ash and crude lipid were similar to those of control, while carbohydrate content was decreased. Total mineral content were $1,916.03\~2,674.24mg/kg$ that was no difference between test samples. From HPLC determination of free sugars, Jocheong was found to contain maltose as the highest sugar, followed by glucose and fructose. In amino acid analysis, seventeen amino acid were identified and quantified. Glutamic acid in Jocheong was major amino acid. The major fatty acids in Jocheong $(0\%,\;control)$ were linoleic acid, palmitic acid, oleic acid, myristic acid and caproic acid. There was no significant differences in fatty acid composition, pH and reducing sugar content among the Jocheong samples. The viscosity and solid contents tended to decrease with the addition of Lentinus edodes extract. Increasing the ratio of mushroom extract in Jocheong tended to decrease the lightness, yellowness and redness in Hunter's color value. Although sensory value decreased with increasing Lentinus edodes extracts, use of mushroom extracts (7: 3; saccharification liquids: Lentinus edodes extracts) is recommended for making Jocheong.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.5
• /
• pp.375-395
• /
• 2006

Purpose: Lingual nerve (LN) damage may be caused by either tumor resection or injury such as wisdom tooth extraction, Although autologous nerve graft is sometimes used to repair the damaged nerve, it has the disadvantage of necessity of another operation for nerve harvesting. Moreover, the results of nerve grafting is not satisfactory. The nerve growth factor (NGF) is well-known to play a critical role in peripheral nerve regeneration and its local delivery to the injured nerve has been continuously tried to enhance nerve regeneration. However, its application has limitations like repeated administration due to short half life of 30 minutes and an in vivo delivery model must allow for direct and local delivery. The aim of this study was to construct a well-functioning $rhNGF-{\beta}$ adenovirus for the ultimate development of improved method to promote peripheral nerve regeneration with enhanced and extended secretion of hNGF from the injured nerve by injecting $rhNGF-{\beta}$ gene directly into crush-injured LN in rat model. Materials and Methods: $hNGF-{\beta}$ gene was prepared from fetal brain cDNA library and cloned into E1/E3 deleted adenoviral vector which contains green fluorescence protein (GFP) gene as a reporter. After large scale production and purification of $rhNGF-{\beta}$ adenovirus, transfection efficiency and its expression at various cells (primary cultured Schwann cells, HEK293 cells, Schwann cell lines, NIH3T3 and CRH cells) were evaluated by fluorescent microscopy, RT-PCR, ELISA, immunocytochemistry. Furthermore, the function of rhNGF-beta, which was secreted from various cells infected with $rhNGF-{\beta}$ adenovirus, was evaluated using neuritogenesis of PC-12 cells. For in vivo evaluation of efficacy of $rhNGF-{\beta}$ adenovirus, the LNs of 8-week old rats were exposed and crush-injured with a small hemostat for 10 seconds. After the injury, $rhNGF-{\beta}$ adenovirus($2{\mu}l,\;1.5{\times}10^{11}pfu$) or saline was administered into the crushed site in the experimental (n=24) and the control group (n=24), respectively. Sham operation of another group of rats (n=9) was performed without administration of either saline or adenovirus. The taste recovery and the change of fungiform papilla were studied at 1, 2, 3 and 4 weeks. Each of the 6 animals was tested with different solutions (0.1M NaCl, 0.1M sucrose, 0.01M QHCl, or 0.01M HCl) by two-bottle test paradigm and the number of papilla was counted using SEM picture of tongue dorsum. LN was explored at the same interval as taste study and evaluated electro-physiologically (peak voltage and nerve conduction velocity) and histomorphometrically (axon count, myelin thickness). Results: The recombinant adenovirus vector carrying $rhNGF-{\beta}$ was constructed and confirmed by restriction endonuclease analysis and DNA sequence analysis. GFP expression was observed in 90% of $rhNGF-{\beta}$ adenovirus infected cells compared with uninfected cells. Total mRNA isolated from $rhNGF-{\beta}$ adenovirus infected cells showed strong RT-PCR band, however uninfected or LacZ recombinant adenovirus infected cells did not. NGF quantification by ELISA showed a maximal release of $18865.4{\pm}310.9pg/ml$ NGF at the 4th day and stably continued till 14 days by $rhNGF-{\beta}$ adenovirus infected Schwann cells. PC-12 cells exposed to media with $rhNGF-{\beta}$ adenovirus infected Schwann cell revealed at the same level of neurite-extension as the commercial NGF did. $rhNGF-{\beta}$ adenovirus injected experimental groups in comparison to the control group exhibited different taste preference ratio. Salty, sweet and sour taste preference ratio were significantly different after 2 weeks from the beginning of the experiment, which were similar to the sham group, but not to the control group.

• 대한공업교육학회지
• /
• v.41 no.2
• /
• pp.48-68
• /
• 2016

This study was conducted to identify the NCS-related research trends, Keywords, the Keywords Networks and the extension of the Keywords using the sementic network analysis and to seek for the development plans about NCS. For this, the study searched 345 the papers, with the National Competency Standards or NCS as a key word, among master's theses, dissertations and scholarly journals that RISS provides, and selected a total of 345 papers. Annual frequency analysis of the selected papers was carried out, and Semantic Network Analysis was carried out for 68 key words which can be seen as key terms of the terms shown by the subject. The method of analysis were KrKwic software, UCINET6.0 and NetDraw. The study results were as follows: First, NCS-related research increased gradually after starting in 2002, and has been accomplishing a significant growth since 2014. Second, as a result of analysis of keyword network, 'NCS, development, curriculum, analysis, application, job, university, education,' etc. appeared as priority key words. Third, as a result of sub-cluster analysis of NCS-related research, it was classified into four clusters, which could be seen as a research related to a specific strategy for realization of NCS's purpose, an exploratory research on improvement in core competency and exploration of college students' possibility related to employment using NCS, an operational research for junior college-centered curriculum and reorganization of the specialized subject, and an analysis of demand and perception of a high school-level vocational education curriculum. Fourth, the connection forming process among key words of domestic study results about NCS was expanding in the form of 'job${\rightarrow}$job ability${\rightarrow}$NCS${\rightarrow}$education${\rightarrow}$process, curriculum${\rightarrow}$development, university${\rightarrow}$analysis, utilization${\rightarrow}$qualification, application, improvement${\rightarrow}$plan, operation, industry${\rightarrow}$design${\rightarrow}$evaluation.'

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.5
• /
• pp.505-522
• /
• 2013

Previously, a new concept of indexing methodology has been proposed for quantitative assessment of tunnel collapse hazard level at each tunnel face with respect to the given geological data, design condition and the corresponding construction activity (Shin et al, 2009a). In this paper, 'linear' model, in which weights of influence factors are invariable, and 'non-linear' model, in which weights of influence factors are variable, are taken into account with some examples. Then, the 'non-linear' model is validated by using 100 tunnel collapse cases. It appears that 'non-linear' model allows us to have adapted weight values of influence factors to characteristics of given tunnel site. In order to make a better understanding and help for an effective use of the system, a series of operating processes of the system are built up. Then, by following the processes, the system is applied to a real-life tunnel project in very weak and varying ground conditions. Through this approach, it would be quite apparent that the tunnel collapse hazard indices are determined by well interlinked consideration of face mapping data as well as design/construction data. The calculated indices seem to be in good agreement with available electric resistivity distribution and design/construction status. In addition, This approach could enhance effective usage of face mapping data and lead timely and well corresponding field reactions to situation of weak tunnel faces.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.111-126
• /
• 1998

In this study, radiographic evaluation was made using panoramic radiography and cross-sectional tomography of SCANORA/sup (R)/ in male and female adults in their 20's on the relationship between the maxillary sinus floor and the apex of the maxillary molar, to test the accuracy and effectiveness of the cross-sectional tomography, and to use this information in the assessment of preop. and postop. root canal treatment, apical surgery, extraction and implantology. Forty-one adults with an average age of 24.4 years were studied using panoramic radiography and cross-sectional tomography. In panoramic view and cross-sectional view, the position of the apices of maxillary molars were classified as separated, contacted, or protruded type; the general shape of the maxillary sinus floor was evaluated horizontally and vertically from cross-sectional tomography. The accuracy of each radiography was tested using maxilla from 5 fresh cadavers from the Anatomy Lab at Yonsei University Dental College, and panoramic view and cross-sectional tomography were taken in the same condition as with the patients. The results were as follows: 1. Panoramic view and cross-sectional view were taken in the maxilla specimen, and the actual distance between the maxillary sinus floor and the tooth apices were measured in the specimen; the median values of the distance from the tooth apices to the maxillary sinus floor in the panoramic view, cross-sectional view and in the actual maxilla specimen were 2.83 mm, 4.51mm, and 4.l5mm, respectively. In the cross-sectional view, the measured distance was close to the actual distance but in the panoramic view, the measured distance was far from the actual distance. 2. When the results of the panoramic view and cross-sectional view were compared, 40.5％ of the results agreed with each other in the two radiographic methods and buccal roots of the 2nd molar were the closest to the maxillary sinus floor in the cross-sectional tomography. 3. In cross-sectional view, when the vertical relationship of the maxillary sinus floor and maxillary roots was assessed, in 1st molars, type II (the sinus floor that extends down to the buccolingual furcation area) was predominant, while in 2nd molars, type I (the sinus floor located above the level connecting the buccal and lingual apices) was predominant. In the horizontal relationship, in 1st molars, type II (the lowest floor of the maxillary sinus located in between the buccal and lingual roots) was predominant; in 2nd molars, type I (the lowest floor of the maxillary sinus located on the buccal side of the buccal roots) and type II appeared in similar frequency. In conclusion, the SCANORA/sup (R)/ cross-sectional tomography was more effective than the frequently used panoramic view, in that the relationship of the maxillary molars and maxillary sinus floor can be evaluated more accurately and the buccolingual cross-sectional view can also be observed. And maxillary sinus floor that was close to maxillary 2nd molar had tendency to be located on buccal side than that close to 1st molar. Therefore, cross-sectional tomography is an effective and accurate method to evaluate the position of the teeth in relation to the sinus floor preoperative and can be easily used to diagnose localized periapical lesions. Also, the image quality obtained was quite satisfactory.

• Proceedings of the EASDL Conference
• /
• 2004.10a
• /
• pp.107-129
• /
• 2004

Sesame oil has been popular for hundreds of years in Korea because of its pleasant flavor and health benefits and has been studied for its antioxidant properties and flavor preferences attributed to its manufacturing methods. The objective of this study was to investigate the qualitative properties of six commercial sesame oils (3 Korean, 2 Japanese, 1 Chinese), The fatty acids in the oil are composed of two main acids oleic acid and linoleic acid with a P/S ratio of 4.99${\sim}$5.73. Of the tocopherol isomers, ${\gamma}$-toc ranged from 23.14 to 34.85mg/100g. Lignan such as sesamin(322.91${\sim}$689.39ppm) and sesamolin (62.19${\sim}$289.82 ppm) is found predominantly in sesame oil. Sesamol (8.52${\sim}$51.21 ppm) was significantly different depending on manufacturer, observed as greatest in the Korean and least in the Japanese products. The induction period was longest in order of the Korean, Chinese, and then Japanese product. The red and yellow values in Lovibond color were highest in the Korean and lowest in the Japanese product. The major volatile compounds (in order of content) were pyrazines, phenols, aldehydes, and then furans and contained a small amount of pyrroles, thiazoles and indoles. The levels of total volatiles were greatest in the Korean and least in the Japanese product. The most abundant volatiles in the Korean product were pyrazines, whereas phenols were higher in the Chinese product compared to the others. From these results, the relationships among pyrazines, sesamol, yellowness and induction period showed positive, respectively. In sensory evaluation, Korean panelists preferred, in order, the Korean, Japanese, and then the Chinese product in strength of and preference for the sesame flavor, also ranking it best in overall acceptance. Japanese panelists found similarities in the Korean and Japanese products and gave an equal level of preference for the sesame flavor and overall acceptance. On the other hand, Chinese panelists preferred the Japanese product in strength and sesame flavor rating it best on overall acceptance.

• Journal of agricultural medicine and community health
• /
• v.28 no.1
• /
• pp.53-66
• /
• 2003

Objectives: To investigate the state of medical care around health sub-centers, public health doctors' participation and opinion in the process of district public health programs. Methods: The study included 1,036 public health doctors who worked at health sub-center all over the country. The data were collected for Feb, 2002 using self-administered questionnaire by mail. Results: One or two doctors were working at health sub-center and 33.5% of health sub-centers was located in the region of the separation of prescription and dispensing. There were another medical facilities in 45.9% of the administrative district(eup or myon) where health sub-centers were located. The count of medical utilization went down to 14.8${\pm}$14.8 per a day in Nov, 2001 from 18.0${\pm}$15.6 in May, 2000, and the decline was much more in the region of the separation of prescription and dispensing. Among public health programs in health sub-centers, public health doctors participated mostly in preliminary medical examination for vaccination and least in health education. They participated in implementation rather than planning or evaluation of health program. Over a half of public health doctors were found to be positive that health programs implemented in their health sub-centers would promote the level of health in community people and they were willing to participate in district public health program if community people were in need. Conclusions: Recently health sub-centers are required to turn into health promotion facilities rather than medical practice facilities. Health program in health sub-centers will be advanced in both quality and quantity by turning the role of public health doctors who have provided medical services mainly into managing health program. Persistent education about managing health program and the policy to motivate participation in health program should be provided for public health doctors.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.5
• /
• pp.434-451
• /
• 2017

For this study, groundwater samples for 3 years from 2011 through 2013 were collected at 106 groundwater monitoring site in Korea. These groundwater samples were analyzed for 13 pesticides such as cabofuran, pentachlorobenzene, hexachlorobenzene, simazine, atrazine, lindane (gamma-HCH), alachlor, heptachlor, chlordane (total), endosulfan (1, 2), dieldrin, endrin, 4,4-DDT. The objectives of this study were to determine the detection frequency and their concentrations of 13 pesticides and evaluate the health risk level considering ingestion, inhalation, and skin contact using concentrations of 13 pesticides in groundwater samples. An analysis was used for the simultaneous determination for 13 pesticides using GC-MS. GC-MS was performed on HP-5ms, using helium ($1ml\;min^{-1}$) as carrier gas. The average recoveries of the pesticides were from 92.8% to 120.8%. The limits of detection (LODs) were between $0.004{\mu}g\;L^{-1}$ and $0.118{\mu}g\;L^{-1}$ and the limits of quantification (LOQs) were between $0.012{\mu}g\;L^{-1}$ and $0.354{\mu}g\;L^{-1}$. 106 groundwater wells were selected. 54 wells were from well to monitor background groundwater quality and 52 wells were from well to monitor groundwater quality in industrial or contamination source area. Eight pesticides including pentachlorobenzene, lindane (Gamma-HCH), heptachlor, chlordane (total), Endosulfan (1, 2), dieldrin, endrin, and 4,4-DDT were not detected in groundwater samples. The detection frequency for hexachlorobenzene, alachlor, carbofuran and simazine was 23.4%, 11.4%, 7.3%, and 1.0%, respectively. Atrazine was detected once in 2011. The average concentrations were $0.00423{\mu}g\;L^{-1}$ for carbofuran, $0.000243{\mu}g\;L^{-1}$ for alachlor, $0.00015{\mu}g\;L^{-1}$ for simazine, and $0.00001{\mu}g\;L^{-1}$ for hexachlorobenzene. The detection frequency of hexachlorobenzene was high, but the average concentration was low. In the contaminated groundwater, the detection frequency for hexachlorobenzene, alachlor, carbofuran, simazine and atrazine was 26.1%, 21.3%, 7.1%, 1.9% and 0.3%, respectively. In the uncontaminated groundwater, detection frequency for hexachlorobenzene, carbofuran and alachlor were 20.2%, 7.5%, and 1.9% respectively. Simazine and atrazine were not detected at uncontaminated groundwater wells. According to the purpose of groundwater use, atrazine was detected for agricultural groundwater use. Hexachlorobenzene showed high detection frequency at agricultural groundwater use area where the animal feeding area and golf course area were located. Alachlor showed more than 50% detection frequency at cropping area, pollution concern river area, and golf course area. Atrazine was detected in agricultural water use area. By land use, the maximum detection frequency of alachlor was found near an orchard. For human risk assessment, the cancer risk for the 5 pesticides was between $10^{-7}$ and $10^{-10}$, while the non-cancer risk (HQ value) was between $10^{-4}$ and $10^{-6}$. For conclusion, these monitoring study needs to continue because of the possibility of groundwater contamination based on various purpose of groundwater use.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.128-137
• /
• 2011

Purpose: Resonance frequency analysis, Periotest, and removal torque (RT) test were known as the methods to assess implant stability. The results of these methods are affected by the bone condition, implant diameter and shape. The purpose of this study is to access the meaning and the correlationship of the resonance frequency analysis, Periotest and RT test in osseointegration simulated acrylic resin when the engaged bone thickness and peri-implant bone defect are changed. Materials and methods: To simulate osseointegration, the fixture was fixed to an aluminum mold with a screw. Acrylic resin powder and liquid were poured into the mold for polymerization. The engaged resin thickness with implant was controlled. Simulated cortical bone thicknesses were 1, 3, 5 and 10 mm. Additional 1, 3 and 5 mm peri-implant bone defects were simulated. Three types of implants were used; 4 mm diameter implants of straight shape, 4 mm diameter implants of tapered shape and 5 mm diameter implants of tapered shape. Five fixtures per each type were tested in respective bone condition. Resonance frequency analysis and Periotest were evaluated in all bone conditions. Peak removal torque was measured at simulated cortical bone thicknesses of 1 and 3 mm. The statistical analysis was performed with the Kruskal-Wallis test, Mann-Whitney U test, and Spearman test using a 95% level of confidence. Results: With increasing engaged bone depth, the Implant Stability Quotient (ISQ) values increased and the Periotest values (PTVs) decreased (P<.001, P<.001). With increasing peri-implant bone defect, ISQ values decreased and PTVs increased (P<.001). When the diameter of implant increased, ISQ values increased and Periotest values (PTV) decreased (P<.001). There was a strong correlation between ISQ values and PTVs (r = -0.99, P<.001). Furthermore, the peak removal torque values had weak correlations with both ISQ values and PTVs (r = 0.52, P<.001 ; r = -0.52, P<.001). Conclusion: This study confirmed favorable implant stability with increasing engaged bone depth and implant diameter and decreasing peri-implant bone defect. ISQ values and PTVs showed strong correlation with each other and not with the peak removal torque values.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.105-115
• /
• 2008

Statement of problem: Proper finishing and polishing enhance both the esthetics and the longevity of restored teeth. Blade finishing technique would be suited for smoothing and finishing. Evaluation of this technique are necessary. Purpose: The purpose of this study was to evaluate the blade finishing and polishing procedures on the surface profile and roughness of ormocer-based composite resin and nanohybrid composite resin. Material and methods: The material included a ormocer-based composite resin ($Admira^{(R)}$ & $Admira^{(R)}$ Flow); a nanohybrid composite resin ($Grandio^{(R)}$ & $Grandio^{(R)}$ Flow). One hundred forty specimens of each group were prepared using a mylar strip and randomly divied into blade finishing and rubber polishing groups (n=10). The average surface roughness (Ra) in micrometers was measured and the surface profile was examined by scanning electron microscopy (SEM) (Magnification ${\times}$ 200). The data were analyzed by Mann-Whitney Test at 0.05 significance level. Conclusion: The results of this study indicated that the mylar strip produced the smoothest surface on all materials and among the finishing-polishing methods was not significanct difference (P>0.05). Ormocer-based flowable composite resin performedthe lowest variability in initial surface roughness among the tested materials.