• Advances in nano research
• /
• 제6권2호
• /
• pp.147-162
• /
• 2018

A new nonlocal higher order shear deformation theory (HSDT) is developed for buckling properties of single graphene sheet. The proposed nonlocal HSDT contains a new displacement field which incorporates undetermined integral terms and contains only two variables. The length scale parameter is considered in the present formulation by employing the nonlocal differential constitutive relations of Eringen. Closed-form solutions for critical buckling forces of the graphene sheets are obtained. Nonlocal elasticity theories are used to bring out the small scale influence on the critical buckling force of graphene sheets. Influences of length scale parameter, length, thickness of the graphene sheets and shear deformation on the critical buckling force have been examined.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.404-408
• /
• 2005

The Reynolds strss equation with turbulent energy-length scales was simplified in the nearly homogeneous turbulent equilibrium flow and a modified Reynolds stress model was proposed. Tn the model proposed in the present study, Reynolds stresses can be expressed in the form of algebraic equation, so that the turbulent stresses and related quantities are calculated through relatively simple procedures. The model predicted well the turbulent shear stresses of homogeneous flow in local equilibrium state obtained from experimental results published earlier Constants used In the model was determined universally and its validity was discussed briefly.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.416-425
• /
• 1993

To investigate the characteristics of the merged jet arising from the interaction of two opposing curved wall jets over a circular cylinder in still air, mean velocity, Reynolds stresses, triple moments and integral length scale were measured using hot-wire anenometry. The turbulent kinetic energy and shear stress budget were evaluated using the measured data. The variations of the Reynolds stresses, the triple moment and integral length scale are severe in the interaction region. The pressure diffusion terms are found to be very large when compared the other terms in the interaction region. The distributions of the Reynolds stress and the triple moment in the similar region are found to be similar to those of conventional plane jets.

• Steel and Composite Structures
• /
• 제26권1호
• /
• pp.89-102
• /
• 2018

This work investigates a novel plate formulation and a modified couple stress theory that introduces a variable length scale parameter is presented to discuss the static and dynamic of functionally graded (FG) micro-plates. A new type of third-order shear deformation theory of Reddy that use only 4 unknowns by including undetermined integral variables is proposed in this study. The equations of motion are derived from Hamilton's principle. Analytical solutions are obtained for a simply supported micro-plate. Numerical examples are presented to examine the effect of the length scale parameter on the responses of micro-plates. The obtained results are compared with the previously published results to demonstrate the correctness of the present formulation.

• 소성∙가공
• /
• 제18권6호
• /
• pp.482-487
• /
• 2009

A finite element based microstructural modeling for the size dependent strengthening of particle reinforced aluminum composites is presented. The model accounts explicitly for the enhanced strength in a discretely defined "punched zone" around the particle in an aluminum matrix composite as a result of geometrically necessary dislocations developed through a CTE mismatch. The density of geometrically necessary dislocations is calculated considering volume fraction of the particle. Results show that predicted flow stresses with different particle size are in good agreement with experiments. It is also shown that 0.2% offset yield stresses increases with smaller particles and larger volume fractions and this length-scale effect on the enhanced strength can be observed by explicitly including GND region around the particle. The strengths predicted with the inclusion of volume fraction in the density equation are slightly lower than those without.

• Advances in nano research
• /
• 제13권1호
• /
• pp.63-75
• /
• 2022

The nonlinear dynamic behavior of a nonuniform small-scale nonlocal beam is investigated in this work. The nanobeam is theoretically modeled using the nonlocal Eringen theory, as well as a few of Von-nonlinear Kármán's theories and the classical beam theory. The Hamilton principle extracts partial differential equations (PDE) of an axially functionally graded (AFG) nano-scale beam consisting of SUS304 and Si₃N₄ throughout its length, and an elastic Winkler-Pasternak substrate supports the tapered AFG nanobeam. The beam thickness is a function of beam length, and it constantly varies throughout the length of the beam. The numerical solution strategy employs an iteration methodology connected with the generalized differential quadratic method (GDQM) to calculate the nonlinear outcomes. The nonlinear numerical results are presented in detail to examine the impact of various parameters such as nonlinear amplitude, nonlocal parameter, the component of the elastic foundation, rate of cross-section change, and volume fraction parameter on the linear and nonlinear free vibration characteristics of AFG nanobeam.

• 한국멀티미디어학회논문지
• /
• 제5권2호
• /
• pp.158-166
• /
• 2002

본 논문에서는 윤곽선 세그먼트의 양 끝점을 잇는 직선과 곡선의 길이의 비율로 윤곽선 변동율을 정의하고, 이로부터 윤곽선의 형태를 기술하는 방법을 제안하였다. 윤곽선 변동율은 윤곽선 세그먼트로부터 계산되기 때문에 회전이나 크기 변형에 불변하는 윤곽선 세그먼트를 추출해야 한다. 이를 위하여 전체 윤곽선의 길이에 비례하는 상대적인 길이로 윤곽선을 분할하고 윤곽선 상의 모든 점을 분할점으로 하는 중첩된 윤곽선 세그먼트를 이용하였다. 윤곽선 변동율은 윤곽선 세그먼트의 단위 길이에 따라 국소적 또는 전역적인 특징을 나타내므로, 윤곽선 변동율의 분포를 나타내는 특징 벡터로 물체의 형태를 기술하고, 단위 길이별로 특징 벡터를 비교하여 윤곽선 형태의 유사도를 계산한다. 제안된 방법을 구현하여 15종의 물고기 영상에 대하여 회전 및 크기 변형을 가한 총 165개의 영상에 대하여 실험한 결과, 회전 및 크기 변형에 대한 불변성은 물론 정규화된 체인코드 히스토그램(NCCH)과 링 프로젝션(TRP)을 이용한 방법에 비하여 군집화 능력이 우수함을 확인할 수 있었다.

• Fisheries and Aquatic Sciences
• /
• 제10권1호
• /
• pp.30-36
• /
• 2007

We present age and growth data for Ilisha elongata, based on 363 specimens caught in 1999 and 2000 around Jeju Island and the southwest coast of Korea. Scale and ring radii of each ring group showed a direct one-to-one relationship, with ring radius increasing as scale radius increased. The relationship between fork length and scale radius was FL=39.553SR+60.935 for females, FL=39.474SR+54.026 for males, and FL=39.608SR+57.547 for both sexes. Monthly changes in the marginal index indicated that a new ring appears once each year (in July). Maximum age, mean age and mean fork length of fish were 10 years, 5.0 years, and 349mm, respectively. Von Bertalanffy's growth equations were $FL_t=495.4{\times}[1-\exp(-0.2586(t+0.6487))]$ for fork length (mm) and $W_t=1,112.5{\times}[1-\exp(-0.2586(t+0.6487))]^{2.874}$ for body weight (g) for both sexes. Monthly changes in the gonadosomatic index (GSI) indicated that the spawning period was in June and July, which corresponded closely with ring formation time. Differences in monthly GSI changes in 1999 and 2000 may be related to water temperature variation. Fecundity ranged from 5,664 to 176,290 eggs per individual (n=43, fork length 264-470mm). The relationship between fecundity(F) and fork length was $F=7.7{\times}10^{-7}{\times}FL^{4.9269}$.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1134-1147
• /
• 1995

POD (proper orthogonal decomposition) is applied to turbulent leading-edge separation bubble to extract coherent structures. A two-dimensional leading-edge separation bubble is simulated by discrete-vortex method, where a time-dependent source forcing is incorporated. Based on the wealth of numerical data, POD is applied in a range of the forcing amplitude ( $A_{o}$ = 0, 0.5, 1.0 and 1.5) and forcing frequency (0 .leq. $f_{F}$H/ $U_{\infty}$.leq. 0.3). It is demonstrated that the structures of POD have noticeable changes with local forcings. In an effort to investigate the mechanism of decreasing reattachment length, dynamic behaviors of the expansion coefficients and contributions of the eigenfunctions of POD are scrutinized. As the forcing amplitude increases, the large-scale vortex structures are formed near the forcing amplitude increases, the large-scale vortex structures are formed near the separation point and the flow structures become more organized and more regular, accompanying with the reduction of reattachment length. By further inverstigation of POD global entropy, it is seen that the reattachment length is closely linked to the degree of organization of the flow structures.es.s.

• 제어로봇시스템학회논문지
• /
• 제8권8호
• /
• pp.625-632
• /
• 2002

We propose an outsole measurement/inspection system to improve the quality of the shoe product. It uses the Divide-and-Conquer technique to measure the length of shoes'outsole. First, it detects edge positions of outsole's toe and heel from each image frame using an unique scale block we defined and calculates the outsole's length as the distance of two edge positions. Then it compensates the total length of outsole using the side image of outsole. Next, it classifies the outsole as inferior goods if the measurement error is bigger than 5.8mm. As a result of testing with the various kinds of outsoles, it was shown that the 95% accuracy was acquired within 1mm allowable error range. In conclusion, the proposed inspection system is effective and useful in the measurement/inspection process of shoe product and any material object as well.