• Journal of the Optical Society of Korea
• /
• 제13권3호
• /
• pp.310-315
• /
• 2009

We report the fabrication of double clad fiber (DCF) and DCF coupler, suitable for fiber based imaging systems requiring the dual-channel transmission. Unlike the conventional DCF which uses silica for both cladding layers, the proposed DCF uses a low-index polymer for its outer-cladding layer coated over the conventional silica inner-cladding layer. The DCF is drawn with a conventional SMF preform but a low-index polymer coating is used for both jacket and outercladding of the fiber. To achieve the cladding mode coupling, a DCF coupler is fabricated by simply twisting two pieces of the proposed DCF after removing the polymer-coating at contacting regions. A cladding mode coupling ratio of 30% was achieved with a contact length of 16 cm. The proposed DCF and DCF coupler were employed in a composite optical coherence tomography (OCT) and fluorescence spectroscopy (FS) system, and both OCT images and FS signal from a plant tissue are measured simultaneously.

• 대한기계학회논문집B
• /
• 제26권12호
• /
• pp.1674-1680
• /
• 2002

An experimental study was made of a large-scale vortical structure over a backward-facing step. The Reynolds number based on the step height was R $e_{H}$ =33,000. To recognize the large-scale vortex, three components of velocity were measured. The measurements were performed in the recirculation zone (x/H=4.0) and the reattachment zone(x/H=7.5). To measure the wall pressure fluctuations in a turbulent flow over a backward-facing step, a 32-channel microphone array was installed beneath the wall in the streamwise and spanwise directions. From the measured pressure field, the size of large-scale vortex was obtained. As a detailed study, a conditionally-averaging technique was employed to characterize the coherent structure of the large-scale vortex. To see the relationship between the flow field and the relevant spatial mode of the pressure field, the spatial box filtering (SBF) was examined. A cross-correlation between velocity and pressure fluctuations was performed to identify the structure and the length scale of the large-scale vortex.x.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2002년도 학술발표회 논문집(II)
• /
• pp.1334-1339
• /
• 2002

본 연구는 국내의 중소하천유역의 설계홍수량 산정을 위해 사용되고 있는 Clark 모형의 저류상수륵 실무자들이 쉽게 이용할 수 있도록 하는 데 목적이 있다. 이를 위해 과거의 강우-유출자료와 단위도를 바탕으로 대표단위도를 유도하고, 수문곡선 감수분석 개넘을 이용하여 Clark 모형의 저류상수를 산정하였다. 저류상수(K)는 Clark 방법의 매개변수 중 계획홍수량에 가장 큰 영향을 주는 인자이다. 따라서 본 연구에서는 실측자료가 없는 유역에서의 K값의 산정을 위해 유역면적, 주유로연장, 유역경사를 이용한 다중 회귀방정식을 제시하였다. 회귀분석결과 저류상수(k)는 지형학적 동질성이 있는 유역에서 뛰어난 상관관계를 나타내었으며 이를 이용하여 한강, 낙동강, 영산강, 금강, 섬진강 유역의 K에 대한 회귀분석식을 도출하였다.

• Journal of Radiation Protection and Research
• /
• 제35권2호
• /
• pp.77-80
• /
• 2010

The spectroscopy toolkit has been developed and tested. The toolkit consists of a CsI(Tl)/PIN diode detector, integrated electronics, and a multi.channel.analyzer and its size was 40 cm(width) by 20 cm(length) by 6 cm(high). It is compact, very portable and simpler and cheaper compared to the conventional spectroscopy system. The gamma energy resolutions of the toolkit were 7.9% for the 660 keV of $^{137}Cs$ and 4.9% for 1,332 keV of $^{60}Co$ respectively. The linearity for gamma energies was good. When the energy spectrum of a ceramic sample containing $^{232}Th$ was measured with the spectroscopy toolkit for 20 minutes, there were significant peaks of the heavy metal. These results show that the resolution of the spectroscopy toolkit is sufficient to accumulate a quality spectrum in a few minutes by using weak, encapsulated commercial sources. Furthermore a toolkit experiment that how to measure energy spectra using the toolkit, and how to identify specific isotopes in a pottery piece, could be widely adopted for education and even for more sophisticated and higher level experiments.

• 한국통신학회논문지
• /
• 제3권1호
• /
• pp.18-25
• /
• 1978

반도체 소자에서 생기는 1/f 형의 잡음의 근원이 무엇인가에 대해 지금까지 여러 이론이 나왔다. 그중에도 Mcwhorter's Surface model이 대표적인 이론이었다. 그러나 Hooge는 이론에 반기를 들고 나왔다. Hooge의 이론에 의하면 thermo cell이나 Concentration cell에서의 1/f-형의 잡음이 표면효과(surface effect)가 아니라는 것이다. 본 논문에서는 이 두 대표적인 이론을 종합검토할 수 있는 Langenvin type의 Boltzmann transport equation에 입각하여 새로운 일반이론을 세웠다. 본 논문에서는 N형 채널을 갖고 있는 금속산화물반도체 전계효과 트랜지스터에서 단일준의 Shockley-Read-Hall recombination center에 의한 단락회로에서 드레인의 1/f-형 잡음스펙트럼을 계산하기 위해 시간에 따라 변화하는 양을 포함시키므로써 각 에너지대의 케리어에 대해 준-페르미준위를 정의할 수 없다고 가정했으므로, 1/f-형의 잡음은 다수케리어 효과에 기인한다고 가정했다. 이러한 가정하에서 유도된 1/f-형의 잡음은 금속산화물반도체 전계효과 트랜지스터에서 1/f-형의 잡음에 중요한 요인들을 모두 보여주었다. : 적주파에서 플렛티유를 나타내지 않았고 채널의 면적 A와 드레인 바이어스 전압 V에 비례하고 체널의 길이 L에 반비례한다. 본 논문의 모델에서는 1/f-응답에서 1/f2에 대한 잡음스트럼의 전이주파수와 P-n 합다이오우드의 surfact center에 관계되는 완화시간(relaxation time)에 대응하는 주파수 사이를 구별하여 설명할 수 있었다. 본 논문의 결과에서 1/f-형 잡음스펙트럼은 격자산란이 주원인이 된다. 금속산화물반도체 전계효과 트랜지스터를 살펴보면 격자산란이 주로 표면에서 일어나기 때문에 1/f-형 잡음이 표면효과라고 말할 수 있다.

• 대한기계학회논문집B
• /
• 제22권5호
• /
• pp.685-697
• /
• 1998

Series of recent k-.epsilon. model modification have been carried out with the aid of DNS data to include the effect of near wall. Though these methods opened new way of turbulence modelings, newly developed turbulence models of its kind had yet shortcomings in prediction for the turbulent flows with various Reynolds numbers and various geometric conditions. As a remedy for these shortcomings, a new k-.epsilon. model proposed here by improving the dissipation rate equation and the damping function for eddy viscosity model. The new dissipation rate equation was modeled based on the energy spectrum and magnitude analysis. The damping function for eddy viscosity was also formulated on the ground of distribution of dissipation rate length scales near a wall and the DNS data. The new k-.epsilon. model was applied to the fully developed turbulent flows in a channel and a pipe with a wide range of Reynolds numbers. Prediction results showed that the present model represents properly the turbulence properties in all turbulent regions over a wide range of Reynolds numbers.

• 한국환경복원기술학회지
• /
• 제16권2호
• /
• pp.137-153
• /
• 2013

In order to assess the effects of ecosystem and landscape in around spur dikes, this study had carried out monitoring on the changes of ecosystem and morphologic characteristics in around spur dikes that had been settled in bend of Youngcheon River. The study site was a short reach with length 190m, spur dikes were installed in March, 2008. Monitoring of the site had been started in May 2008 and had been completed September 2011. The results are as follow ; 1) Spur dikes that were installed for channel stabilization are performing effectively hydraulic functions at flooding time. 2) Spur dikes that were installed in water colliding front of river bend brought about sediment deposition between those and formed pools around front of those. Therefore, it was verified to create various physical characteristics in the aspect of channel topography and flow consequently. 3) The survey results that was carried out in October 2008 showed to emerge 25 species of plant, 9 species of fish and 17 species of benthic macroinvertebrates, but the survey results in October 2010 showed to emerge 74 species of plant, 12 species of fish and 19 species of benthic macroinvertebrates. In particular, plant species that emerged in 2011 increased about three times more than those in 2008.

• 전자공학회논문지A
• /
• 제31A권10호
• /
• pp.79-86
• /
• 1994

Gain-guided broad-area single quantum well separate confinement heterostructure diode lasers have been fabricated from structures grown by metal organic vapor phase epitaxy. The active layer of the epi-structure is InGaAs emitting 962-965nm and the guiding layer GaAs. The channel width is fixed to 150${\mu}$m and the cavity length varys within the range of 300~800${\mu}$m. For uncoated LD's, the output power of 0.7W has been obtaained at a pulsed current level of 2A, which results about 60% external quantum efficiency. The threshold current density is 200A/cm$^{2}$ for the cavity lengths of 800.mu.m LD's. The stain effect upon the transparent current density has been observed. The internal quantum efficiency is expected to be 88% and the internal loss to be 18$cm^{-1}$. The beam divergence has been measured to be 7$^{\circ}$to lateral and 40$^{\circ}$to transverse direction. finally, 1.2W continuous-wave output power has been obtained at a current level of 2A for AR/HR coated LD's die-bonded on Cu heat-sink and cooled by TEC.

• 한국유체기계학회 논문집
• /
• 제18권6호
• /
• pp.57-62
• /
• 2015

The test of comparing liquid flow calibration system (approved by KOLAS) for accuracy and structure change test was performed in the test bed in order to evaluate the typical characteristics of the electromagnetic flow meters and parshall flume that are generally used in the water discharging facilities. The results of the accuracy comparing test with liquid flow calibration system showed the error of less than 2%. Pharshall plume got error up to -8.3% (low flow) from the flow rate test, but less than 4% from the accumulated flow test because of offset error at high flow rate and low flow rate. Evaluation of structual change test was tested with only parshall flume using structure and it consisted of installation angle (parshall flume and level sensor) and position change. Installation angle, water level sensor angle and position changing test for parshall flume had errors of 3.1%~-9.2%, 0.4%~-5.6% and 0.2%~1.3% respectively. Especially, the error showed the largest increase when the water level sensor measured the point of decreased flow by the structure change. Therefore, error factors (change of straight pipe length, installation of obstacle or effect of foreign substances on water level sensor) that can often occur in the field should be derived and the research for optimized installation method should be carried out continuously.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2003-2008
• /
• 2007

The transient power characteristics of a PEM fuel cell stack was experimentally studied using a commercial 1.2kW PEM fuel cell ($Nexa^{TM}$ Power Module, Ballard Power System Inc.). The conditions in PEM fuel cell stack such as temperature and water content change rather slowly because of their large heat capacity and long channel length, which results in long transient time to converge to a steady state. The steady characteristics of the PEM fuel cell module was determined first, followed by the measurement of its transient characteristics upon stepwise and continuous load current changes. During the stepwise current change from 5A to 25A, the output voltage initially decreased below the steady voltage and then increased gradually. Similar behavior was also observed for the stepwise current change from 25A to 5A. This transient behavior is explained with reference to the evolution of the temperature and water content of the PEM fuel cell stack.