• 한국통신학회논문지
• /
• 제42권3호
• /
• pp.554-561
• /
• 2017

IoT(Internet of Things) 응용 디바이스는 실내, 지하 등의 신호가 도달하기 어려운 환경에 있는 경우가 많을 뿐만 아니라 송신 출력도 낮으므로 기지국이 낮은 수신 감도에서도 수신이 가능하도록 설계되어야 한다. 이를 위해 채널 상태가 좋지 않은 디바이스는 낮은 부호화율이나 반복전송 등을 이용하여 낮은 데이터 전송률로 전송할 수 있다. 채널 상태에 따라 커버리지 클래스를 나누고 채널 상태에 맞는 전송 속도를 사용할 때 커버리지 클래스마다 패킷의 길이가 다를 수 있으며 슬롯 알로하 랜덤 접속의 성능이 떨어질 수 있다. 특히 서로 다른 커버리지 클래스의 디바이스들이 공유된 자원을 사용할 때는 채널 상태가 나쁜 디바이스의 성능이 떨어질 수 있으며, 반대로 커버리지 클래스마다 분리된 자원을 사용할 때는 한 자원 영역에 랜덤 액세스를 하는 디바이스가 많아지는 혼잡이 발생할 수 있다는 문제가 있다. 본 논문에서는 이를 보완할 수 있는 방법들을 제안한다. 이 연구는 MTC 디바이스를 중심으로 연구하였으며, 추후 발전 가능성이 높은 부분이라 생각된다.

• Journal of Ecology and Environment
• /
• 제37권4호
• /
• pp.217-223
• /
• 2014

We conducted a distributional survey of Pectinatella magnifica, an invasive species, in the Geum River and the Nakdong River from July 12 to July 25, 2014. The spacing between the study sites was 10 km along the main channels for the Geum River (n = 12, 120 km) and the Nakdong River (n = 38, 380 km) from the estuarine barrage to upper part of main channel. Pectinatella magnifica was detected along the riparian zone (within 100 m) at each of the study sites. Presence rate of P. magnifica in Geum River and Nakdong River was 25% and 32.6%, respectively. The colony number of P. magnifica at Geum River ($9.5{\pm}3.1colony/m$, n = 3) was over 94 fold higher than that in the Nakdong River ($0.1{\pm}0.1colony/m$, n = 16). The Total length distribution of P. magnifica had a truncated bell shape at each rivers (mean length: $14.0{\pm}1.2cm$ for Geum River (n = 32), and $16.8{\pm}1.4cm$ for Nakdong River (n = 52)). These findings could provide basic information regarding the distribution pattern of P. magnifica in a new invasion area.

• 한국광학회지
• /
• 제26권4호
• /
• pp.203-208
• /
• 2015

파장 투과 대역폭이 좁으면서도 반사율이 높은 파장 필터를 구현하기 위해서 격자의 반사율이 진행 방향을 따라 서서히 변하는 구조의 에포다이즈드 격자 구조를 폴리머 광도파로와 함께 제작하였다. 격자로 인한 유효 굴절률 변화가 $5{\times}10^{-4}$인 경우에 대하여 에포다이즈드 격자의 길이에 따른 반사율 변화를 설계하였으며 길이가 15 mm 이상이 되는 경우에 반사율이 99%에 도달함을 확인하였다. 길이가 서로 다른 여러 개의 격자를 제작하여 반사율, 3-dB 대역폭, 20-dB 대역폭을 측정하였으며, 격자 길이가 18 mm인 소자에서 95%의 반사율을 얻을 수 있었고, 이때 3-dB 대역폭은 0.28 nm, 그리고 20-dB 대역폭은 0.70 nm의 특성을 가짐을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.390-394
• /
• 1999

본 논문에서는 twisted-pair 채널특성을 이용하여 가우스 및 원단누화 잡음환경에서의 디지털가입 자라인의 BER 성능평가를 Semi-analytic 시뮬레이션 방법에 의해 수행하였다. 그 결과로서 감쇄가 없는 경우의 시뮬레이션 결과는 이론치보다 E$^{b}$ /N$^{0}$ 면에서 0.5dB 이내의 열화를 보석 시뮬레이션의 타당성을 보인다. 전송거리가 5000m로 길어지면 BER=l0$^{-7}$ 에서 E$^{b}$ /N$^{0}$ 는 약 4dB, 일정거리에서 나이퀴스트 주파수가 512kb/s로 높아지면 약 2dB 정도 열화한다. 또한 원단누화 잡음에 의한 영향은 전송거리면에 있어서는 원단누화 잡음 감쇄정수 k=$10^{-10}$ 이상일 때, 나이귀스트 주파수면에서는 k=$10^{-14}$ 이상일 때 크게 나타난다. 본 해석의 결과는 향후 국내외 디지털가입자라인의 표준화 제정에 기본적인 데이터로 활용될 수 있을 것이다.

• 한국통신학회논문지
• /
• 제34권12C호
• /
• pp.1167-1176
• /
• 2009

본 논문에서는 OFDM(Orthogonal Frequency Division Multiplexing) 송신단에서 IFFT 를 수행한 후 Cyclic Prefix를 첨부하여 OFDM 심볼을 생성하는데 필요한 지연을 감소시킬 수 있는 IFFT(Time shifted DIT IFFT)의 구조를 제안하고, IEEE 802.16e Mobile WiMax OFDMA/TDD규격에 적합한, 1024크기의 FFT에 1/8 cyclic prefix를 가지는 시스템의 송신단 IFFT를 VHDL로 설계한 결과를 제시한다. 본 논문에서 제안하는 IFFT는 OFDM송신단의 지연을 줄이기 위하여 IFFT에 역비트(Bit-Reversed) 순서로 데이터를 입력하고, FFT의 Frequency Translation 특징을 이용해 IFFT의 출력이 cyclic prefix의 길이만큼 시간영역 쉬프트(Time-shift) 되어 나오도록 구현되었다. 이 과정은 cyclic prefix의 길이 특성을 이용하여 부가적인 복소곱셈기(Complex Multiplier)없이 구현되었고, OFDM 송신단의 지연과 함께 IFFT 결과를 저장하는 메모리의 크기도 줄일 수 있다. 송신단의 최종 출력이 통상적인 OFDM 심볼과 완전히 동일하기 때문에 전체 시스템의 성능에도 영향을 미치지 않는다.

• Journal of Communications and Networks
• /
• 제3권4호
• /
• pp.365-373
• /
• 2001

We propose a new channel reservation protocol which can reduce message delay by using a counter for detection of d source conflict in a WDM single-hop network with non-equivalent propagation delay. A source convict occurs when a source node has the right to transmit more than or equal to two messages simultaneously, which are transmitted using different wavelengths. In such a case, the source node has to newly obtain the right to transmit the message. In the proposed protocol, by using a source conflict counter a source node can detect a source conflict before a wave-length assignment is performed. Therefore, the source node can start a procedure to newly obtain the right to transmit the message which cannot be transmitted due to a source conflict. We analyse the throughput performance by taking the effect of a source conflict into account, and show that the approximate analysis and the computer simulated results are close. Also, from computer simulated results, we show that our proposed protocol can reduce mean message delay dramatically without degrading throughput performance as the offered load becomes large.

• Current Research on Agriculture and Life Sciences
• /
• 제2권
• /
• pp.77-90
• /
• 1984

Results investigated backwater phenomena at Geumho river basin to get a basic data for Daegu basin area development plan are as the follows. 1. It is a A=0.35 L 1.848 (r = 0.97), the relationship between basin area and river length at Geumho river. 2. Dividing the rainfall of Geumho river basin as two parts, a first half rainfall and a second half rainfall, the amount of a first half rainfall appeared 57.5% comparison with total rainfall. 3. The maximum flood discharge appeared 12 hrs. continuous rainfall rather than 24 hrs. continuous rainfall. 4. Results investigated backwater phenomena from Geumho II bridge to chungchun appeared the rising water level of 69 cm, 55 cm, 44 cm, at section III in the starting point water level of 1.8 m, 2.4 m, 4.0 m respectively. 5. Results investigated backwater phenomena by the flood water level appeared a similar form. There was a average rising water level of 30 cm at section III. At the results of this computation, it was confirmed that section III was affected the highest backwater phenomena among the observed river reaches in Geumho river. In addition, this paper should be given a assistance to decide a economic and safe section in construction of bank of river and estuary barrage.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.869-876
• /
• 2018

The force of a direct current (DC) electromagnetic pump used to transport liquid lithium was analyzed to optimize its geometrical and electrical parameters by numerical simulation. In a heavy-ion accelerator, which is being developed in Korea, a liquid lithium film is utilized for its high charge-stripping efficiency for heavy ions of uranium. A DC electromagnetic pump with a flow rate of $6cm^3/s$ and a developed pressure of 1.5 MPa at a temperature of $200^{\circ}C$ was required to circulate the liquid lithium to form liquid lithium films. The current and magnetic flux densities in the flow gap, where a $Sm_2Co_{17}$ permanent magnet was used to generate a magnetic field, were analyzed for the electromagnetic force distribution generated in the pump. The pressure developed by the Lorentz force on the electromagnetic force was calculated by considering the electromotive force and hydraulic pressure drop in the narrow flow channel. The opposite force at the end part due to the magnetic flux density in the opposite direction depended on the pump geometrical parameters such as the pump duct length and width that defines the rectangular channels in the nonhomogeneous distributions of the current and magnetic fields.

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.46-52
• /
• 2008

The restrictor, which is a fluid channel from a reservoir to a chamber inside a thermal micro actuator, has been fabricated using ArF and KrF excimer lasers, Diode-Pumped Solid State Lasers (DPSSL) and femtosecond lasers for a feasibility study. A numerical model of fluid dynamics for the actuator chamber and restrictor is presented. The model includes bubble formation and growth, droplet ejection through nozzle, and dynamics of fluid refill through the restrictor from a reservoir. Since an optimized and well-fabricated restrictor is important for a high frequency actuator, some special beam delivery setups and post processing techniques have been researched and developed. The effects of variations of the restrictor length, diameter, and tapered shapes are simulated and the results are analyzed to determine the optimal design. The numerical results of droplet velocity and volume are compared with the experimental results of a cylindrical-shaped actuator. It is found that the micro actuators having tapered restrictors show better high frequency characteristics than those having a cylindrical shape without any notable decrease of droplet volume. The laser-fabricated restrictors demonstrate initial feasibility for the laser direct ablation technique although more development is required.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제14권4호
• /
• pp.156-165
• /
• 2006

Convective boiling heat transfer coefficients were measured in a horizontal minichannel with R-l34a. The test section was made of stainless steel tube with an inner diameter of 3.0 mm and a length of 2m. It was uniformly heated by applying electric current directly to the tube. Local heat transfer coefficients were obtained for heat fluxes from 10 to $40kW/m^2$, mass fluxes from 200 to $600kgT/m^2s$, qualities up to 1.0, and the inlet saturation temperature of $10^{\circ}C$. The experimental results were mapped on Wojtan et $al.'s^(7)$ and Wang et $al.'s^(8)$ flow pattern maps. The nucleate boiling was predominant at low vapor quality whereas the convective boiling was predominant at high vapor quality. Laminar flow appeared in the flow with minichannel. The experimental results were compared with six existing two-phase heat transfer coefficient correlations. A new boiling heat transfer coefficient correlation based on the superposition model for refrigerants was developed with mean and average deviations of 10.39% and -3.66%, respectively.