• Solar Energy
• /
• v.17 no.4
• /
• pp.45-56
• /
• 1997

The purpose of this research was to study the characteristics of heat transfer of snow removing facilities using heat pipe by experimental method. Heat pipes was constructed a flexible tube connected between evaporator and condenser ends for altitude adjustment of evaporator and it was constituted an internal diameter of 25.4mm, a length of 950mm for heating section and a length of 6000mm for condenser section with copper material for closed system. The results showed that the effect of heat transfer was increased when inclination angle and inlet temperature of heating water increased. Wall temperature response by inclined angle $4.5^{\circ}c-9^{\circ}c$ and working fluid amount 0.96 from to 1.3 times of evaporator volume were better than those of other working fluid and angle.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.2
• /
• pp.57-62
• /
• 1997

Based on the facts that significant parts of the harbor response spectrum usually reside in the vicinity of the Helmholtz mode in the eastern part of Korea. economically feasible redemption measures of seiches for malfunctioned harbors already in service is proposed by extending the wisdom of perforated breakwaters and adjusting the width of entrance channel as a control tool. It turns out that as the entrance channel is getting narrower, the harbor system is getting slender due to the increase of added hydrodynamic length so that harbor response can be effectively diminished and separated from the incident wave spectrum where considerable amount of wave energy is located at the lower frequency range.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.766-774
• /
• 2022

In this study, the fit of commercial sports bras was analyzed according to various design variations, focusing on the shape of the shoulder strap, which is known to cause great discomfort in wearing sports bras. Experimental clothes were set to four commercially available sports bras with different shoulder strap shapes. The results showed that, in "size suitability," the overall satisfaction with experimental clothing B, of which the shoulder strap can be adjusted, was the highest, especially for "underbust circ. fit," "bust circ. Fit," and "shoulder strap length." In the "Shape suitability" and "Wearability" sections, experimental clothing B also showed the highest satisfaction and the shoulder strap adjustment device did not negatively affect wearing satisfaction. In the question on "side wings rolled up," experimental clothing A also received a relatively good score, which is due to its long front length. In the "Compression of the front center" section, the responses for experimental clothing A and B were "appropriate" and for C and D, they were "pressurized." In "motion suitability" as well, satisfaction with experimental clothing B was the highest, followed by experimental clothes A, C, and D. In the "body shape correction" section, clothing B elicited the highest satisfaction, followed by experimental clothes A, C, and D, in that order. Overall, it is recommended that shoulder straps be applied with adjustable straps for the comfort of the shoulder area while wearing sports bras.

• Journal of the Korean Home Economics Association
• /
• v.37 no.7
• /
• pp.17-27
• /
• 1999

According to the design method for constructing the Korean Men's Jo-go-ri(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic pattern Jo-go-ri, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip(Dongjung) was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symmetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar(Kit) and the collar strip create a visual effect by equalizing the lengths of the two sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since there is no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial regulation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment, can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the basic pattern design is as follows: 1) The conic angle for the Jo-go-ri's girth, length end neck width is fixed at 70(72) degree. 2) The radius of the cone is sleeve length. 3) The bust girth calculation formula is B/4 + 2.5 cm. 4) The armhole formula is B/4 + 2.5cm. 5) The neck width formula is B/10. 6) The ratio of the collar junction{width of collar(Kit) + width of collar strip(Dongjung) to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius of sleeve length, that is an arc that exceeds the length of the Jo-go-ri's midsection.

• Journal of Preventive Medicine and Public Health
• /
• v.43 no.6
• /
• pp.523-534
• /
• 2010

Objectives: We assessed impact of performance reporting information about the readmission rate, length of stay and cost of hip hemiarthroplasty. Methods: The data are from a nationwide claims database, National Quality Improvement Project database, of Health Insurance Review & Assessment Service in Korea. From January 2006 to April 2008, we received information of length of stay, readmission within 30 days, cost of 22 851 hip hemiarthroplasty episodes. Each episodes has retained the diagnoses of comorbidities and demographics. We used time-series analysis to assess the shifting of patients selections, between high volume (over 16 operations in a year) and low volume institutions, after performance reporting (December 2007). The changes of quality (readmission, length of stay) and cost were evaluated by multilevel analysis with adjustment of patient's factors and institutional factors after performance reporting. Results: As compared with the before performance reporting, the proportion of patients who choose the high volume institution, increased 3.45% and the trends continued 4 months at marginal significance (p = 0.059). After performance reporting, national average readmission rate, length of stay were decreased by 0.49 OR (95% CI=0.25 - 0.95) and 10% (${\beta}$=-0.102, p<0.01) and cost was not changed (${\beta}$=-0.01, p=0.27). The high volume institutions were more decreased than low volume in length of stay. Conclusions: After performance reporting, readmission rate, length of stay were decreased and the patient selections were marginally shifted from low volume institutions to high volume institutions.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1642-1647
• /
• 2004

In this article, we present the development of the automated system for adjusting the 6 D.O.F circular fixator. The system includes scheduling software to adjust the Hexapod Circular Fixator (HCF) and an automated strut system with the ability of the multiple synchronized motion. HCF was designed to control a 6 degree-of-freedom Ilizarove fixator and it's mechanism is known as the Stewart Platform. HCF scheduler evaluates each value of altered length of the HCF struts to correct the complex skeletal deformity by using the X-ray data of the patient. The data of HCF scheduler feed into the automated strut system which be able to provide the scheduled adjustment and the automated strut is synchronized by input data.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.8
• /
• pp.35-40
• /
• 1997

To suppress the short channel effects in nMOSFET with 0.1.mu.m channel length, we have fabricated and characterized the ISRC n MOSFET with several process condition. When the recess oxide thickness is 100nm and the channel dose for threshold voltge adjustment is 6*10$^{12}$ /c $m^{-2}$ , B $F_{2}$$^{+}$, the maximum transconductance at $V_{DS}$ =2.0V is 455mS/mm and the BIDL is kept within 67mV. By comparing the ISRC n MOSFET with the conventioanl SHDD (shallowly heavily dopped drain) nMOSFET, we verify the suppression of short channel effects ISRC structure.e.

• Communications for Statistical Applications and Methods
• /
• v.27 no.1
• /
• pp.65-77
• /
• 2020

Geometric charts are effective in monitoring the fraction nonconforming in high-quality processes. The in-control fraction nonconforming is unknown in most actual processes; therefore, it should be estimated using the Phase I sample. However, if the Phase I sample size is small the practitioner may not achieve the desired in-control performance because estimation errors can occur when the parameters are estimated. Therefore, in this paper, we adjust the control limits of geometric charts with the bootstrap algorithm to improve the in-control performance of charts with smaller sample sizes. The simulation results show that the adjustment with the bootstrap algorithm improves the in-control performance of geometric charts by controlling the probability that the in-control average run length has a value greater than the desired one. The out-of-control performance of geometric charts with adjusted limits is also discussed.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.105-110
• /
• 2012

Steel elements are widely used for temporary structures on every construction site. but despite its strong resistences against heavy concrete volumes, they are easily eroded by oxygens in the space as times have been gone. If they are used several times in the construction fields, their elements are rusted and deformed and the strength is gradually reduced through the weak part. From this point of view, aluminum pipe support has been developed in stead of steel pipe sopport with enhancing durability against oxygens all the more. The developed aluminium pipe support has been lighter than steel unit, so workability has been improved. In another advantage of aluminium pipe support, different level control is possible with being equipped with the level control nut which enables the length adjustment of aluminium pipe support and the collapse of aluminum pipe support could be also prevented from the structures in the long term.

• Korean Security Journal
• /
• no.8
• /
• pp.309-336
• /
• 2004

Approximately equivalent to character disorder or character neuroses or behavioral reaction. For a discussion of the term as used currently, in the 1968 revision of psychiatric nomenclature(DSM-II). In DSM-I(1952 nomenclature), this term referred to those cases in which the personality, in its struggle for adjustment to internal and external stresses, utilized primarily a pattern of action or behavior rather than symptoms in the mental, somatic or emotional spheres. There is minimal subjective anxiety and little or no sense of distress. As thus defined, there are three main groups of personality disorder, personality pattern disturbance, personality trait disturbance and sociopathic, personality disturbance. Morton Prince asks whether a subconscious process can perform the same function as are ordinarily performed by conscious intelligence that is to say memory, perception, reasoning, imagination, volition, affectivity, etc? He cites clinical material at great length, concluding that the quality of the functions performed they frequently exhibit, that which is characteristic of intelligence.