• Journal of the Korean Data and Information Science Society
• /
• 제28권4호
• /
• pp.937-945
• /
• 2017

The purpose of using a control chart is to detect any change that occurs in the process. When control charts are used to monitor processes, we want to identify this changes as quickly as possible. Many problems in quality control involve a vector of observations of several characteristics rather than a single characteristic. Multivariate CUSUM or EWMA charts have been developed to address the problem of monitoring covariance matrix or the joint monitoring of mean vector and covariance matrix. However, control charts tend to work poorly when we use the highly correlatted variables. In order to overcome it, Hawkins (1991) proposed the use of regression adjustment variables. In this paper, to monitor covariance matrix, we investigate the performance of MEWMA-type control charts with and without the use of regression adjusted variables.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.57-59
• /
• 2006

In order to apply the network adjustment, the correct ambiguities between each of reference stations must be calculated. This paper focused on the comparison of ambiguity resolution between the reference stations. Three hours test data with different baseline length from 20 km to 60 km have been analyzed. The results show that the time-to-fix between 20 km and 40 km is typically under 1 minute. However, over 60km baseline, the time-to-fix performance degrades.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 춘계학술대회 논문집
• /
• pp.86-90
• /
• 1992

We have studied the characteristics of n-and p-channel FETs with submicron channel length fabricated by twin-well process. Threshold voltage variation and potential distribution with channel ion implantation conditions and impurity profile of n-and p-channel region wee simulated using SUPREM-II and MINIMOS 4.0 simulater, P-channel FET had buried-channel in the depth of 0.15 $\mu\textrm{m}$ from surface by counter-doped boron ion implantation for threshold voltage adjustment. As a result of device measurement, we have obtained good drain saturation characteristics for 3.3 [V] opreation, minimized short channel effect with threshold voltage shift below 0.2[V], high punchthrough and breakdown voltage above 10[V] and low subthreshold value.

• 한국안전학회지
• /
• 제29권1호
• /
• pp.41-46
• /
• 2014

The design of a 7 degree of freedom motion capture device(MCD) has been presented. The newly designed MCD overcomes the shortcomings of the existing CADEN-7 exoskeleton robot by implementing various ergonomic design. To improve ease of operation, light-weight high-strength materials such as carbon pipes and engineering plastics were used to reduce weight of the MCD and arm-length adjustment mechanism was also added. The MCD showed consistent measurement results in designed experiments involving change of arm posture from nominal configuration to either elbow-side or arm-front configurations. Furthermore, captured motion in more natural tennis swing appeared to agree well with visual observations made.

• Design & Manufacturing
• /
• 제17권4호
• /
• pp.57-62
• /
• 2023

As a representative method for mass production, a multi-cavity type mold capable of simultaneously molding products of the same shape can be applied. It has the advantage of improving the productivity from several times to several tens of times, but it may cause disadvantages which is the quality deviation with each cavity. This study, therefore, has tried to increase the cavity filling balance by using a melt flipper and a flow distance control part in the runner part of the mold. Along with this, the design and manufacturing of air vents during injection molding have been verified through experimental methods to achieve a higher level of multi-cavity filling balance and dimensional accuracy.

• 패션비즈니스
• /
• 제8권1호
• /
• pp.61-75
• /
• 2004

This paper has the meaning to plan new design of patient's cloth focusing on its aesthetic aspect through surveying actual condition of use of patient's cloth and reflecting color or pattern that patient prefers to it. Substantial purpose of this paper is 1) to survey actual condition of patient's cloth on the basis of general hospital of downtown of Busan City, 2) to revise difficulty of patient's cloth and survey and analyze color and pattern that patient prefers and 3) to suggest new patient's cloth design using color and pattern that meets function that is not difficult for patient's activity and cure and stabilizes patient's mind on the basis of the result of analysis. The result of this paper is like follow. 1. Problem of current patient's cloth is that most hospital uses patient's cloth having white background and hospital logo of blue or green color and its length is too long so it requires adjustment of length of sleeves and pants 2. The result from analyzing preferred patient's cloth is that patient prefers patient's cloth classified by man and woman, one that its length of sleeves and pants are adjusted and one that there is no collar in its neckline. Regarding color, male patient prefers mild indigo color(5PB7/7) and mild green color (5G9/2) and female patient prefers bright purple color and bright scarlet color(5YR8/7). Regarding pattern, both of man and woman prefers natural pattern. 3. This paper planned total 6 kinds of patient's cloth (common patient's cloth: 2 kinds, male patient's cloth: 2 kinds and female patient's cloth: 2 kinds) through revising difficulty and using new color and pattern according to result of preference.

• 품질경영학회지
• /
• 제39권3호
• /
• pp.391-399
• /
• 2011

Our study was carried out to analyze the variation factors of severity-adjusted length of stay(LOS) in coronary artery bypass graft(CABG). The subjects were 932 CABG inpatients of the Korean National Hospital Discharge In-depth Injury Survey from 2004 through 2008. The data were analyzed using $x^2$ test and the severity-adjusted model was developed using data mining technique. The results of the study were as follows: male(71.1%), older than 61 years of age(61.6%), more than 500 beds(92.8%) and admitting via ambulatory care(70.0%) appeared to have higher rate than otherwise. In-hospital mortality of CABG inpatients was 2.8%. In addition, 46.4% of the patients received their care in other residence. The angina pectoris(45.6%) was found to be the highest in principle diagnosis, followed by chronic ischemic heart disease(36.9%) and acute myocardial infarction(12.0%). We developed severity-adjusted LOS model using the variables such as gender, age and comorbidity. Comparison of adjusted values in predicted LOS revealed that there were significant variations in LOS by location of hospital, bed size, and whether patients received the care in their residences. The variations of LOS can be explained as the indirect indicator for quality variation of medical process. It is suggested that the severity-adjusted LOS model developed in this study should be utilized as a useful method for benchmarking in hospital and it is necessary that national standard clinical practice guideline should be developed.

• 한국의류학회지
• /
• 제39권6호
• /
• pp.826-837
• /
• 2015

This study analyzes the shapes of the adjustment of a Napoleon Collar which combines a stand collar with an upper collar. It established experimental conditions for fixing the conditions of Napoleon Collar components (lapel width, stand collar size and upper collar size) as well as varied the shape of the neckline, the length of the curve of a stand collar and the size of the drawing space at the center back. It produced 22 test clothes of muslin, which were dressed on dress form No. 8. The results indicate that: 1. Neckline shape determines the amount of stand and fall. Less curved neckline stands higher against the neck and a more curved neckline is laid lower onto the body. 2. A shorter curve length of a stand collar allows a longer roll line to fall farther away from the neck with more space between the neck and collar. However, the longer the depth of curve of a stand collar creates a shorter roll line that stands high against neck and closer to neck without any space between the neck and collar with a collar line matching the neck of the dress form. 3. The smaller the drawing space at the center back creates a shorter the style line of the upper collar. However, a narrower back width of the collar creates a bigger drawing space at the center back with a longer the style line and a more naturally placed back width of the collar. 4. A Napoleon Collar creates a longer depth of curve for a stand collar and a smaller drawing space at the center back that is tightly and stably stuck to the neck.

• 한국조경학회지
• /
• 제34권3호
• /
• pp.79-90
• /
• 2006

Tamarix chinenis blooms twice a you and its flowers, branches and leaves make the adjustment of tree shape. Propagation methods and growth characteristics of T. chinensis were studied in order to ascertain its potential use as one of vegetation resources for coast forestation and landscaping. The study results indicated that 1 or 2 you old hard wood cuttings showed higher rooting ratio than greenwood or semi hard wood cuttings. One to one mixture between vermiculite and pearlite appeared to be the best for bed soil, and sea sand and silt(loess) mixture was the next. Sea sand and granitic soil followed after. In terms of seasonal differences, spring cuttings showed the best rooting ratio, root number, and root length. Fall cuttings followed after spring cutting, and summer cuttings showed worst results regarding rooting ratio, root number, and root length. The best rooting promotion effects of growth regulators were observed with sea sand bed soils. There was no significant difference among growth regulators in terms of rooting and shoot growth. Low concentration below 100 ppm of growth regulators was enough for rooting promotion effect. In general, the number and mean length of roots and shoots were showed the excellent records in the sites with high rooting ratio. The study result strongly showed that T. chinensis can be considered as a suitable tree for coast forestation and landscaping because of its easy cutting propagation and rapid growth on saline lands.

• 한국환경농학회지
• /
• 제28권2호
• /
• pp.113-124
• /
• 2009

Severe sediment-laden problem has been the hot issue in Korea. It was assumed that agricultural activities and landslides were the primary causes of these problems in watersheds. The USLE-based systems have been widely used in soil erosion studies. However the GIS-based USLE modeling system has limitation in USLE L factors. In this study, the SATEEC L module was developed to reflect the slope length segmentations in the fields. The SATEEC L module was applied to the study watershed to analyze the effects of using the SATEEC L module on estimated sediment. As shown in the comparisons between SATEEC estimated sediment with SWAT values, the SATEEC GA-SDR module derives the SDR with reasonably acceptable accuracies. However, it is worthy to note that the soil erosion using the SATEEC L module for the study watershed was lower than that without using the SATEEC L module by 25%, although the SATEEC estimated sediment values with and without using L module match the SWAT sediment values with similar accuracies. This is because the SATEEC GA-SDR module estimates lower SDR in case of greater soil erosion estimation without the L module and greater SDR in case of lower soil erosion estimation with the L module. This indicates that the SATEEC input parameters, especially L factor, need to be prepared with care for accurate estimation of SDR at a watershed scale and for accurate evaluation of BMPs in the watershed.