• Korean Journal of Weed Science
• /
• v.13 no.2
• /
• pp.151-158
• /
• 1993

This experiment was conducted in order to understand the intra-and the inter-competition of arrowhead, Sagittaria trifolia L., under the conditions of arrowhead monoculture and rice-mixed culture, respectively. In arrowhead monoculture, the infra-specific competition in both shoot length and floral axis number began at 10 plants per $0.5m^2$ and that in leaf number, leaf length, dry shoot weight and formated tuber number did at 5 plants per $0.5m^2$. In the inter-specific competition according to arrowhead density in the constant rice-mixed culture, the plant height and the tiller number of rice decreased at 15 and 5 plants of arrowhead per $0.5m^2$, respectively. The dry top weight and the formated tuber number of arrowhead decreased with increase of arrowhead density. In the inter-competition according to rice plant density in the constant arrowhead-mixed stands, the dry matter weight and the produced tuber number of arrowhead decreased with increase of rice plant density and the plant height and the tiller number of rice also did with that. In the different transplantation time of rice, the growth in arrowhead became less in order of late transplantation>standard one>early one and the plant height and the tiller number of rice became more in order of that by comparing the percentage of growth under the mixed culture to that under the arrowhead monoculture.

• Journal of Environmental Impact Assessment
• /
• v.26 no.6
• /
• pp.538-552
• /
• 2017

In this study, total mercury (THg) of Black-tailed Gull (Larus crassirostris) eggs laid on Baengnyeongdo, West Sea of Korea was analyzed in order to compare the THg concentrations of eggs depending on egg-laying order. The first-laid eggs ($mean{\pm}standard$ error, $234.4{\pm}11.2ng/g\;wet$, n=18, t=8.4, p<0.01) significantly had higher THg concentrations than the second-laid eggs ($182.8{\pm}9.1ng/g\;wet$, n=18). Also, the first-laid eggs had higher values in biometrics (length $63.10{\pm}0.49mm$, t=2.4, p<0.05; width $44.51{\pm}0.19mm$, t=4.3, p<0.01; weight $65.53{\pm}0.87g$, t=4.2, p<0.01) than the second-laid eggs (length $62.37{\pm}0.40mm$, width $43.55{\pm}0.17mm$, and weight $62.48{\pm}0.72g$). These differences might be attributed to the amount of food eaten by females relating to males' courtship feeding pattern (males increase courtship feeding rate before the first eggs are laid, and decrease the rate following the laying of the first eggs). Moreover, the lower food intake of females could diminish the quantities of egg albumen that contains a protein binds to most of methylmercury during the period of egg production. Therefore, it is necessary to consistently apply one of egg selection methods (targeted selection (the first-laid egg or the second-laid egg), random selection, and etc.) in one nest for ensuring comparability of mercury concentrations among monitoring sites and monitoring years.

• Korean Journal of Environment and Ecology
• /
• v.26 no.1
• /
• pp.57-66
• /
• 2012

This study was conducted to investigate the reproductive ecology of the Korean Mandarin Fish, Siniperca scherzeri in Seomjin River and Imjin River from April to October 2008. After have investigating the relationship between standard length (SL) and Gonadosomatic index (GSI) of Siniperca scherzeri, we can conclude that the body length of maturation was over 200mm SL in case of females and over 180mm SL in males. The GSI of the females that were from Seomjin river was the highest in April (7.43%), and gradually decreased after May (5.55%) and June (3.58%). The GSI was decreased sharply in August and indicated the lowest value in September (0.44%). The GSI of the females that were from Imjin river showed similar tendency of females' GSI from Seomjin river. The GSI of males from Imjin river was totally higher than that of females, it was 5.96% in April, and 8.03% in May. It was lowered in early June, and late June, it indicated 2.12%. In September, it was the lowest value (0.20%), and increased after October (0.54%). The result of histological study of ovary presented similar result of the study of GSI in Seomjin river and Imjin river. The ratio that fishes constitute in stomach contents of Siniperca scherzeri was 92% in Seomjin river and 90% in Imjin river. Digestion of food organisms and the ratio of unidentifiable fishes in stomach contents was fairly high, and it was 50% in Seomjin river and 72.2% in Imjin river. In the period of study, eating ratio was very low 38.3% (36 ind.) in Seomjin river and 21.8 (53 ind.) in Imjin river.

• Korean Journal of Environment and Ecology
• /
• v.30 no.5
• /
• pp.874-887
• /
• 2016

We surveyed bimonthly from April to October 2015 to understand the fish fauna and community structure in Wangpicheon. The collected species during the survey period were 40 species belonging to 15 families. Dominant species by number were Zacco koreanus (31.3%) and Rhynchocypris oxycephalus (14.7%). In biomass, the dominant species were Z. koreanus (29.2%) and Coreoperca herzi (8.6%). Also, nine endemic species (22.5%) including Squalidus multimaculatus and two endangered species (Lethenteron reissneri, Cottus koreanus) were identified. It was identified one introduced species (Oncorhynchus mykiss) from foreign countries for aquaculture. Compared with previous data, nine species were newly identified including L. reissneri, S. gracilis majimae, Pseudobagrus fulvidraco, O. mykiss, Chelon haematocheilus, Siniperca scherzeri, Acanthogobius lactipes, Luciogobius guttatus and Channa argus. Seven species (Rhodeus ocellatus, S. gracilis majimae, Hemibarbus longirostris, Pseudogobio esocinus, Microphysogobio yaluensis, Hemiculter eigenmanni and Cobitis hankugensis) introduced from other native waters in Korea were estimated. According to the analysis of the habitat characteristics of major migratory species (Tribolodon hakonensis, O. keta and Plecoglossus altivelis), O. keta was observed at station 11 and T. hakonensis at station 7, 10 and 11. These fishes have been mainly identified in the downstream. However P. altivelis was widely distributed from station 3 to 11. In the comparison of average standard length of P. altivelis at each station during the same period, populations collected from station 3 and 5 which are mid-upper area of the stream were $125.8{\pm}34.2mm$. Their growth was good compared with those collected from station 8 and 11 (mid-lower area): $80.2{\pm}16.6mm$. This difference in length comes from the artificial structures including weir, thus it is necessary to create a fishway that enables P. altivelis to pass around barriers for free movement and resource management.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.316-323
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of different thread designs on the marginal bone stresses around dental implant. Materials and methods: Standard ITI implant(ITI Dental Implant System; Straumann AG, Waldenburg, Switzerland), 4.1 mm in diameter and 10 mm in length, was selected as control. Test implants of four different thread patterns were created based on control implant, i.e. maintaining all geometrical design of control implant except thread pattern. Four thread designs used in test implants include (1) small V-shape screw (model A), (2) large V-shape screw (model B), (3) buttress screw (model C), and (4) trapezoid screw (model D). Surface area for unit length of implant was 14.4 $mm^2$ (control), 21.7 (small V-shape screw), 20.6 (large V-shape screw), 17.0 (buttress screw) and 28.7 $mm^2$ (trapezoid screw). Finite element models of implant/bone complex were created using an axisymmetric scheme with the use of NISA II/DISPLAY III (Engineering Mechanics Research Corporation, Troy, MI, USA). A load of 100 N applied to the central node on the crown top either in parallel direction or at 30 degree to the implant axis (in order to apply non-axial load to the implant NKTP type 34 element was employed). Quantification and comparison of the peak stress in the marginal bone of each implant model was made using a series of regression analyses based on the stress data calculated at the 5 reference points which were set at 0.2, 0.4, 0.6, 0.8 and 1.0 mm from implant wall on the marginal bone surface. Results: Results showed that although severe stress concentration on the marginal bone cannot be avoided a substantial reduction in the peak stress is achievable using different thread design. The peak marginal bone stresses under vertical loading condition were 7.84, 6.45, 5.96, 6.85, 5.39 MPa for control and model A, B, C and D, respectively. And 29.18, 26.45, 25.12, 27.37, 23.58 MPa when subject to inclined loading. Conclusion: It was concluded that the thread design is an important influential factor to the marginal bone stresses.

• Journal of radiological science and technology
• /
• v.28 no.2
• /
• pp.105-110
• /
• 2005

Background/Aim : Common bile duct (CBD) stones may cause jaundice, cholangitis, or pancreatitis. Extracorporeal shock wave lithotripsy (ESWL) may be needed whenever endoscopic procedure are failed to extract common bile duct stones. The aim of this study is to provide the standard for patient's best choice on ESWL for treatment of CBD stones resistant to endoscopic extraction. Materials and Methods : Fourty-six patients failed in endoscopic stone extraction including mechanical lithotripsy were treated by ESWL. In all patients, endoscopic sphincterotomy and nasobiliary drainage tube was done before ESWL using the ultrasonography for stone localization with a spark-gap type lithotriptor. Patients were sedated with an intravenous injection of 50 mg of Demerol. None were treated under general anesthesia. Results : Overall complete clearance rate of CBD stone was 89.1% (41/46). In 82.6% of the patients, the stones were extracted endoscopically after ESWL, and spontaneous passage was observed in 6.5%. In the clearance rate after ESWL, there were no noticeable differences with regard to number (single: 82.8%, two or three: 100%, more than three: 100%) and size of the stone (less than 33mm: 92.9%, 33 mm or larger: 83.3%), whereas there were significant differences with regard to the ratio of sum of long-axis length of the all stones to sum of long-axis length of the CBD excluding stone (1:2.4, 1:2.1) and diameter of the largest stone to diameter of CBD excluding stone (1:0.9, 1:0.4) for patients with complete clearance compared with those without. Conclusion : We propose that stones without the fragments are travelable sufficient space in CBD or extractable sufficient diameter of CBD regardless of stone size and number should be treated by other technique to prevent time and cost consuming, such as percutaneous transhepatic cholangioscopylithotomy.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.456-461
• /
• 2010

A study was conducted to investigate the effect of topophysis, and uniting method of rootstock and scion on rooting and subsequent growth of stenting-propagated cut rose ($Rosa$ $hybrida$ Hort.) in an effort to develop an efficient stenting propagation method for domestic rose cultivars. Four cultivars used in this study were two standard type cultivars 'Sweet Yellow' and 'Hanmaum', and two spray type cultivars 'Chelsi' and 'May'. Scions were grafted on cuttings of a rootstock $Rosa$ $indica$ 'Major'. The stenting-propagated scion-rootstock unions were planted in rockwool cubes ($50{\times}50{\times}50mm$, Delta, Grodan, Denmark) and were placed in a graft-take chamber for five days before being placed on misted greenhouse beds. The rootstock was removed of all leaves and nodes. Both the base of scions and top of stocks were simultaneously cut at a $45^{\circ}$ angle for grafting. Scions were prepared as single node cuttings, each with a five-leaflet leaf. Three positions of topophysis used were 7-9th (top), 4-6th (middle), and 1st-3rd (bottom) nodes from the stem base. Four uniting materials used were tube, tube + parafilm wrap, tube + clothespin, and clothespin. Rooting and growth were affected by the topophysis and cultivar. The best topophysis for rooting was 7-9th (top) nodes in all cultivars. Topophysis affected percent rooting, and number of roots, length of the longest root, and but not weight, shoot length and graft-take. Rooting and growth were affected by the uniting method and cultivar. Tube uniting method generally showed higher percentage graft-take, percent rooting, and number of roots than other methods. However, rootstock and scion union was not complete in this treatment. On the whole, the greatest rooting and subsequent growth of stenting-propagated plants were found in the tube + clothespin method. Except 'Sweet Yellow', rooting and growth were not adequate in the clothespin method. The results suggested that a tube + clothespin method was the most effective, and this method may be used as a substitute to save labor compared to a tube + parafilm wrap method which is currently being used in commercial nurseries.

• Journal of Yeungnam Medical Science
• /
• v.12 no.2
• /
• pp.366-385
• /
• 1995

Epidemiological studies are important in both the prevention and treatment of mycobacterial infections. This study was initiated to establish the pulsed-field gel electrophoresis (PFGE) method, which are not yet extensively studied. The most apprpriate restriction endonucleases included DraI, AsnI, and XbaI. The optimal PFGE condition was different according to the enzymes used. Two stage PFGE was performed, in case of DraI first stage was performed with 10 seconds of initial pulse and 15 seconds of final pulse, while the second stage was performed with 60 seconds of initial pulse and 70 seconds of final pulse. The electrophoresis time for DraI-PFGE was 14 hours for each stage. Electrophoresis was performed for 22 hours, in case of XbaI, with 3 seconds of initial pulse and 12 seconds of final pulse. Electrophoresis was performed for 22 hours, in case of AsnI, with 5 seconds of initial pulse and 25 seconds of final pulse. In all cases the voltage of the electrophoresis was maintained constantly at 200 voltage. Standard mycobacterial strains, which included Mycobacterium bovis BCG, M. tuberculosis, and M. fortuitum, could not be differentiated by PFGE analysis. PFGE analysis was performed to differentiate 9 clinically isolated M. fortuitum strains using AsnI. All M. fortuitum strains showed different genotypes except 2 strains. Cluster analysis divided M. fortuitum strains into 2 large groups. PFGE analysis was performed to further differentiate M. fortuitum isolates using XbaI. The undifferentiated 2 M. fortuitum strains showed different PFGE patterns with Xba I. Cluster analysis of the XbaI-PFGE patterns showed more complex grouping than AsnI-PFGE patterns, which showed that XbaI-PFGE analysis was better than AsnI-PFGE in M. fortuitum genotyping. The top dissimilarity values of AsnI-PFGE and XbaI-PFGE were 0.74 and 0.75, respectively. This value was higher than that of arbitrarily primed polymerase chain reaction (AP-PCR) analysis and lower than that of restriction fragment length polymorphism (RFLP) analysis. This suggested that PFGE can be used as a supportive or alternative genotyping method to RFLP analysis.

• Korean Journal of Plant Resources
• /
• v.34 no.5
• /
• pp.403-410
• /
• 2021

The aim of this study was to investigate the growth characteristic and ginsenoside contents of 7 and 13 year-old wild-simulated ginseng (Panax ginseng C.A. Meyer) according to rusty root. The root growth characteristics of wild-simulated ginseng were did not shows significant difference according to the rusty root. The results of ginsenoside contents of wild-simulated ginseng according to rusty root, ginsenoside Rb1 and Rg1 of 7 year-old wild-simulated ginseng were had shows a significantly higher in rusty root compare to general root. On the other hand, ginsenodie Rc, Rd, Re and Rg2 were significantly higher in gerneral root. In the case of 13 year-old wild-simulated ginseng, the contents of ginsenoside did not shows to significant difference according to rusty root. The results of correlation analysis between growth characteristics and ginsenoside content of general root, the ginsenoside Rb2, Rc, Rd, Rf, Rg1 were positive correlation with root length, while as the ginsenoside Rd of rusty root was shows significantly negative correlation with root length. The results of this study was might be able to improve awareness of consumer related to rusty root of wild-simulated ginseng. Moreover, might be help to provide useful information on the establish quality standard and distribution system of wild-simulated ginseng.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.6
• /
• pp.495-502
• /
• 2020

Purpose: The aim of this study was to assess the effectiveness of domestically developed volar locking plate which has the concept of double-tiered subchondral support (DSS) in maintaining the reduction after distal radial fracture surgery. Materials and Methods: From July 2017 to December 2018, 54 patients were assessed. Plain radiographs were obtained immediately after surgery and at the last follow-up, and the radiographic parameters were measured in those images: radial length, radial inclination, volar tilt, ulnar variance, and distal dorsal cortical distance. The patients were subdivided into their age, type of fracture, and the position of the plate to evaluate the influence of each factors on the reduction maintenance. Results: Distal dorsal cortical distance in radiographs after the surgery was 5.91 mm (standard deviation, ±1.95 mm) on average. Significant differences in the radial length (p=0.038) and ulnar variance (p=0.001) were observed between immediately after surgery and at the last follow-up. When the parameters were evaluated by dividing the patients into subgroups according to the three specific factors, the ulnar variance showed a significant increase at the last follow-up when the patients were included 65-years-old or older. AO/OTA type C3 fracture, and Soong classification grade 0 plate position (p=0.007, p=0.012, p=0.046, respectively). Conclusion: Using the domestically developed DSS-type volar locking plate, significant reduction after distal radial fracture surgery could be maintained successfully. On the other hand, further study will be needed to determine about the reduction loss of the lunate facet identified in special cases that deal with fractures in elderly patients, unstable AO/OTA type C3 distal radial fractures, and Soong classification grade 0 plate position.