• Korean Journal of Acupuncture
• /
• v.28 no.2
• /
• pp.49-58
• /
• 2011

Objectives : The purpose of this study is examining the effects of appling acupressure to acupuncture points (study group) and Interferential current therapy (ICT) to cervical region (control group) on the cerebral blood flow of 20 tension-type headache patients and the reduction of their headaches. For approaching this examination, clinical research was conducted for three weeks those two groups, each contains 10 patients. Methods : We stimulated 7 acupuncture points for headache with the acupressure (for three weeks) and applied ICT to cervical region. Also we measured VAS (visual analogue scale) and the blood flow of the vertebral arteries with TCD (transcranial doppler ultrasonography). Results : (1) When the left and right vertebral artery of study group was compared each time, significant differences were found after the 1st treatment (p<.001). Also the significant differences were found after 2, 3weeks treatment (p<.05). (2) When the Visual Analog Scale of study group were compared periodically, the significant reductions were found after the 1 week treatments (p<.05). Also the significant differences were found after 2, 3 weeks treatments (p<.001). In the case of the control group, the significant reduction were found after the 2 and 3 weeks treatments (p<.001). Conclusions : The acupressure applied to acupuncture points reduced the headache and increased the ratio of cerebral blood flow.

• Journal of Chest Surgery
• /
• v.18 no.4
• /
• pp.692-699
• /
• 1985

Fifty cases of Open Heart Surgery due to congenital and acquired heart disease were done using the cardiopulmonary bypass in the Department of Thoracic and Cardiovascular surgery, Chosun University Hospital from November, 1980 to June, 1985. 1. The age of the congenital heart disease was from 7 to 29 years, the mean age was 14.5 years. In the acquired heart disease, the age was from 14 to 48 years, and the mean age was 22.3 years. The ratio of male to female was about 1.8:1. 2. The number of congenital cyanotic heart disease were 7 patients, congenital acyanotic heart disease were 17 patients and acquired valvular heart disease were 26 patients. All of the acquired heart disease was one or more valve disease. 3. Preoperative symptoms of the congenital heart disease were exertional dyspnea [cyanotic 100%, acyanotic 70.6%] and palpitation [cyanotic 28.6%, acyanotic 76.1%], and the acquired heart diseases were exertional dyspnea [92.3%], palpitation [34.1 %], and chest discomfort [30.8%]. 4. The method of the myocardial protection during the cardiopulmonary bypass were mild or moderate hypothermia, intermittent coronary perfusion of the cardioplegic solution, topical myocardial hypothermia with 4oC Hartmann`s solution. 5. In the cases of the valve replacement, postoperative oral anticoagulant therapy was started at oral intake of food using the warfarin and persantin, and the prothrombin time was maintained 30-50% of control value during 3-6 months for tissue valve replacement and permanently for metal valve replacement. 6. The postoperative complications were appeared in 24 cases and the complications were wound infection, occipital alopecia, hemorrhage etc. 7. The mortality after open heart surgery was 8 percents and the cause of death was low cardiac output syndrome, right heart failure, DIC, and Left ventricle rupture.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.5
• /
• pp.589-596
• /
• 2021

In this study, the optimum gating system was designed, and the two zinc alloy worm gears were manufactured in single process by applying a symmetrical gating system with 2 runners. The SRG ratio is set to 1 : 0.9 : 0.6, and the cross-sectional shapes such as sprue, runner and gate are designed. In order to determine whether the design of the gating system is appropriate, casting analysis was carried out. It takes 4.380 s to charge the casting 100%, 0.55 to 0.6 m/s at the gates and solidification begins after the casting is fully charged. The amount of air entrapment is 2% in the left gear and 6% in the right gear. Hot spots occurred in the center hole of the gear, and pores were found to occur around the upper part of the hole. Therefore, the design of the casting method is suitable for worm gears. CT analysis showed that all parts of worm gear were distributed with fine pores and some coarse pores were distributed around the central hole of worm gear. The yield strength and tensile strength were 220 MPa, 285 MPa, and the elongation rate was 8%. Vickers hardness is 82 HV.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.311-319
• /
• 2018

Purpose: The aim of this study is to develop a small combine for harvesting miscellaneous cereal crops. Methods: A prototype small combine was designed and constructed. Its specifications and basic performance were investigated. Results: The prototype small combine for harvesting miscellaneous cereal crops was designed and constructed to reflect similar specifications as those of the conventional combine. The prototype small combine comprises a diesel engine with the rated power/speed of 22.0 kW/2,600 rpm, three-stage primary and two-stage speed range transmission shifts, and a double acting threshing part. The maximum travel speeds of the prototype combine are approximately 0.72 m/s, 2.50 m/s, 0.30 m/s at the low, high speed range shifts in the forward direction, and while traversing in the reverse direction, respectively. The minimum radius of turning was approximately 1.50 m. In a static lateral overturning test, the prototype combine overturned neither to the right nor to left on a $30^{\circ}$ slope. The results of an oilseed rape harvesting test included the maximum operating speed of 0.32 m/s, the grain loss ratio of approximately 9.0%, and the effective field capacity of approximately 10.3 a/h. Additionally, among the outputs in grain outlet, the whole grains, damage grains, and materials other than grain (MOG) ratios accounted for 97.4%, 0.0%, and 2.6%, respectively. Conclusions: The prototype small combine for harvesting miscellaneous cereal crops indicates good driving ability and stability. The results of the oilseed rape harvesting test reveal that the harvesting performance must be enhanced such that the separating and cleaning parts are more suitable for each type of crop, thus reducing grain loss and foreign substances among the outputs in grain outlet. An improved small prototype combine could be used effectively to mechanize the harvesting of miscellaneous cereal crops in small family farms or semi-mountainous areas.

• Journal of Yeungnam Medical Science
• /
• v.5 no.1
• /
• pp.23-32
• /
• 1988

Finger injuries are becoming more common with the increasing use of mechanical industrial and household appliances. Among the hand injuries, amputation is the serious disaster to the patient. Recently, application of microsurgical technique to the reattachment of ampuatated digits has been common clinical procedures. We performed microsurgical replantation to the 75 patients with 102 digits from march in 1986 to february in 1988. The following results were obtained. 1. The most common age distribution was third decade and male to female ratio was about 5:1. 2. The ratio of right to left hand was about 1:1 but the dominant to non-dominant hand was about 2:1. 3. The index finger was most commonly injured and the next was middle finger. 4. The most common type of the injuries was the crushing injury and the most common vector was a kind of pressor. 5. The anesthesia was performed in equal ratio between the general and regional anesthesia. 6. The survival rate of microreplantation to the injuries of the zone II was 77.8% and zone III was 80%. 7. The functional result after replantation at zone II was better than zone III. 8. Microreplantation was performed in any case of the type of the injury, the severity of crushing and the ischemic time, and the patients requirement was an important factor.

• The Journal of Korean Academy of Sensory Integration
• /
• v.17 no.1
• /
• pp.9-18
• /
• 2019

Objective : This study investigated the effect of intensive weight shift training (IWST) on the ability to balance in a sitting posture of children with spastic cerebral palsy (SCP). Methods : One child with spastic diplegia participated in this study for a total of 8 weeks using the ABA experimental design. For the pre-intervention period (A1), general physical therapy (GPT) for children with SCP was performed. The intervention period (B1 and B2), GPT and IWST were conducted for children with SCP, and GPT was conducted again for the post-intervention period (A'1 and A'2). Trunk control capacity was measured using the Korean Trunk Control Measurement Scale (TCMS-K) and Biorescue (RM Ingenierie, France). Results : All TCMS-K variables increased from A1 to B2, and decreased from B2 to A'2. The total area with limit of stability (LOS) increased from A1 to B2, and decreased from B2 to A'2. The ratio of the left/right (Lt/Rt) and anterior/posterior (Ant/Post) LOS area was closer to 1, meaning symmetry, in B2 than in A1. The ratio of the Lt/Rt LOS area decreased further from 1 in A'2 than in B2. The ratio of the Ant/Post LOS area was closer to 1 in A'2 than in B2. Conclusion : IWST had a positive effect on the improvement of balance in the sitting posture of a child with SCP. The results suggest that IWST might help to improve the balance abilities of children with SCP for independent sitting, postural control, and activities of daily living.

• Journal of Oral Medicine and Pain
• /
• v.21 no.2
• /
• pp.293-304
• /
• 1996

The purpose of this study was to investigate the peak electromyographic activity(EMG) and time intervals in firing sequence of Anterior temporalis(TA) and Masseter(MM) on clenching, the number of tender points in the head and neck muscles, the occlusal contact state on clenching, and their relationship. 78 patients with Temporomandibular Disorders(TMDs) participated and were classified into articular or muscular group by clinical signs and symptoms. BioEMG$\textregistered$ of integrated masticatory function analyzer, Biopak$\textregistered$ system(Bioresearch Inc., USA), was used to measure EMG and related items, and T- Scan$\textregistered$(Tekscan, USA), computerized occlusal analyser, was used to record occlusal contact state on maximum voluntary clenching. EMG and occlusal contact were synchronously recorded and analysed with SAS Statistical program. The results of this study were as follows : 1. In total subjects, EMG of TA was lower than that of MM in articular group but in muscular group, vice versa, As a result, the ratio TA to MM was significantly different between the two groups. no significant differece. 3. The number and force of occlusal contact were more in articular group, but there was no significant difference in Total Left-Right statistics(TLR) between the two groups. 4. In unilaterally affected subjects for muscle function, no significant difference was observed between the affected side and the contralateral side in articular group, but in muscular group, the item of the number of tender points showed significant difference. However, for occlusal contact items, contact force in articular group shows significant difference between the two sides. 5. Rate of coincidence of the first firing side of TA with affected side or preferred chewing side was higher and not different between the two groups, but no significant correlation was showed between the first firing side and the first occlusal contact side.

• Archives of Plastic Surgery
• /
• v.36 no.1
• /
• pp.46-50
• /
• 2009

Purpose: Finger injury by green onion cutting machine is one of the common hand injuries in the kitchen. It has a unique feature: there are multiple parellel laceration 3 - 5 mm wide. There are two directions of injuries(vertical, oblique). It may involve bone, tendon, nerve, and vessel injuries. We discuss its management and the long - term progress. Methods: We have treated six patients from 2003 to 2007. We carried out low tension approximation with thin suture materials to avoid ischemia and performed the additional operation as nail bed repair, tenorrhaphy, open reduction, vessel anastomosis, and composite graft. We reviewed the record of initial injury and collected the follow - up record. Results: They were all middle aged - women who had worked in the kitchen. Right hand was dominent over left hand. The ratio of the directions was 3 : 3 (vertical : oblique). They were all competely healed although there were three atrophy, four hyperesthesia, and one nail deformity. Conclusion: Finger injury by green onion cutting machine is a unique pattern of laceration with various accompanied injuries. It may look like a severe form of injury, but in most cases have relatively favorable progress. We have to perform careful examination of accompanied injuries and carry out the proper management. First and foremost, the user especially in the middle aged women should be warned to be careful in handling this risky machine.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.1
• /
• pp.90-94
• /
• 2008

The purpose of this study was to investigate the effects of immediate non-functional loading by analyzing histomorphology around the implant tissues in dogs. Five eight- to nine-month-old full-grown dogs weighing around 12 kg were used in the study. Group I (control group) comprised those in which delayed loading was applied to the right side of the mandible, and Group II (experimental group) consisted of dogs in which immediate loading was performed on the left side of the mandible. Resorbable blast media (RBM)-treated double-threaded US III implants measuring 3.5 mm in diameter and 11 mm long were used in the study. Each animal received four implants in each group, for a total of 40 implants. Cemented type abutments were used after implantation. An 8-week period was allowed for bone healing and an abutment was placed after exposing the periosteum for loading. An implant sample was obtained from bone blocks taken when the dogs were killed at 16 weeks after loading. A Mann-Whitney U-test was performed to evaluate statistical significance. Student's t-test was used for the histological evaluation. The bone formation ratio in Groups 1 and 2 was 88.23 and 86.41%, respectively. No significant difference in new bone formation was observed in the two groups. As no significant difference was seen in new bone formation between the delayed and immediate loading groups, early loading might be possible after implant placement.

• The korean journal of orthodontics
• /
• v.43 no.1
• /
• pp.15-22
• /
• 2013

Objective: The purpose of this study was to investigate the relationship between the mandibular dental and basal arch forms in subjects with normal occlusion and compare them with those of Class III malocclusion using cone-beam computed tomography (CBCT). Methods: CBCT images of 32 normal occlusion (19 males, 13 females; 24.3 years) and 33 Class III malocclusion subjects (20 males, 13 females, 22.2 years) were selected. Facial axis and root center points were identified from the left to right mandibular first molars. Distances between the facial axis and root center points for each tooth were calculated, and 4 linear and 2 ratio variables were measured and calculated for each arch form. The variables were compared between groups by independent t-test. Pearson correlation coefficient was applied to assess the relationships between dental and basal variables within each group. Results: The mandibular dental and basal intercanine widths were significantly greater in the Class III group than in normal occlusion subjects (p < 0.05). The dental and basal intercanine widths as well as the dental and basal intermolar widths were strongly correlated in normal occlusion and moderately correlated in Class III malocclusion. Conclusions: The dental arch form demon strated a strong positive correlation with the basal arch form in the normal occlusion group and moderate correlation in the Class III malocclusion group. These results might be helpful for clinicians to have a better understanding of the importance of basal arch form in the alveolar bone.