• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.817-820
• /
• 2004

The $Sr_{0.7}Bi_{2.6}Ta_2O_9$(SBT) thin films are deposited on Pt-coated electrode($Pt/TiO_2/SiO_2/Si$) using a RF magnetron sputtering method. The ferroelectric properties of SBT capacitors with annealing time were studied. In the SEM images, Bi-layered perovskite phase was crystallized at 10min and grains largely grew with annealing tune. SBT thin films are transformed from initial amorphous phase to the fully formed layer-structured perovskite. During the annealing process at $750^{\circ}C$, we found that an fluorite-like stage is formed after 3min. In the XRD pattern, the SBT thin films after 3min annealing time had (105) orientation. The ferroelectric properties of SBT capacitor with annealing time represent a favorable properties at 60 min. The maximum remanent polarization and the coercive electric field with 60 min are $12.40C/cm^2$ and 30kV/cm, respectively. The leakage current density with 60min is $6.81{\times}10^{-10}A/cm^2$.

• Current Photovoltaic Research
• /
• 제9권1호
• /
• pp.6-10
• /
• 2021

The mesh mask screen, which is generally used for screen printing metallization of silicon solar cell, requires high squeegee pressure and low printing speed. These requirements are acting as a limiting factor in production yield in photovoltaic industries. In order to improve the productivity, a metal mask, which has high durability and high printing speed, has been researched. In this paper, the characteristics of each solar cell, in which electrodes were formed by using a metal mask and a mesh mask, were analyzed through recombination current density. In particular, the metal-induced recombination current density (Jom) representing the recombination of the emitter-metal interface was calculated using the shading method, and the resulting efficiency and open-circuit voltage were analyzed through the diode equation. As a result of analyzing the proportion of the metal-induced recombination current density to the total emitter recombination current density, it was analyzed that the reduction of the metal-induced recombination current density through the metal mask is an important factor in reducing the total recombination current density of the solar cell.

• Current Photovoltaic Research
• /
• 제9권4호
• /
• pp.128-132
• /
• 2021

Advances in screen printing technology have been led to development of high efficiency silicon solar cells. As a post PERx structure, an n-type wafer-based rear side TOPCon structure has been actively researched for further open-circuit voltage (Voc) improvement. In the case of the metal contact of the TOPCon structure, the poly-Si thickness is very important because the passivation of the substrate will be degraded when the metal paste penetrates until substrate. However, the thin poly-Si layer has advantages in terms of current density due to reduction of parasitic absorption. Therefore, poly-Si thickness and firing temperature must be considered to optimize the metal contact of the TOPCon structure. In this paper, we varied poly-Si thickness and firing peak temperature to evaluate metal induced recombination (Jom) and contact resistivity. Jom was evaluated by using PL imaging technique which does not require both side metal contact. As a results, we realized that the SiN_x deposition conditions can affect the metal contact of the TOPCon structure.

• Journal of Biosystems Engineering
• /
• 제37권4호
• /
• pp.245-251
• /
• 2012

Purpose: Provision of accurate temperature measurement is an essential element to ensure a precise control in greenhouse environment. This study was organized to compare the effects of six solar radiation shields with different shapes for temperature measurement and find the most appropriate shield for greenhouse environment. Methods: A fan-aspirated radiation shield was designed and manufactured. Using the fan-aspirated radiation shield and five other shapes i.e., the cup shape, horizontal pipe, vertical pipe, parallel boards and commercial shields, temperature measurement was conducted over the lawn surface as well as greenhouse indoor environment. The measurement height varied at 0.5, 1.0 and 1.5 m from the floor. Results: The measured temperatures by the fan-aspirated radiation shield were 1.30-$1.49^{\circ}C$ lower than the values recorded by other different-shaped shields at 1.5 m of measurement height. As the measurement height decreases, observed differences between measured temperatures of the fan-aspirated radiation shield and other shields demonstrate a declining trend. However, at low measurement heights, the radiation emitted from the bottom surface would be the source of error in temperature measurement. Conclusions: The fan-aspirated radiation shield is a required tool for exact measurement of air temperature in greenhouse temperature control.

• 대한방사선기술학회지:방사선기술과학
• /
• 제16권1호
• /
• pp.57-65
• /
• 1993

Asymetric system have been introduced in these years by KODAK company nam of Insight system for the purpose of improve the chest image. We have had a problem of chest radiology that it is very difficult to visualize the lung field and modiastinal region at one shot. That's why we are the RT using the technique of high voltage hard quality radiography in chest radiography. Also it is known the c-type wide latitude film can lift up the density of mediastinal structures. Authors investigated the photographic characteristics and physical structure of Insight system. Method 1. Investigated the structure of Emulsion layer. Calculated the particle size of Insight system using SEM(Scanning Electron Microscope). 2. Photographic characteristics has been compared the Insight system with the ortho KM/MG combination in $60{\sim}120kV$ range. Results 1. The particle size of backside film were investigated about 2 times larger that of front side film. 2. The front and backscreen's thickness ratio was detected 1 : 3.87, that the backscreen's thickness was thicker than frontscreen. 3. At the view point of photographic characteristics the frontside of insight system make up the contrast, backside make up the density at low exposure lesion.

• 통합자연과학논문집
• /
• 제11권2호
• /
• pp.69-75
• /
• 2018

The red algae Gracilaria vermiculophylla is widely spread around seaside areas across the globe, and has been used as a food resource in Southeast Asian countries. Previous studies have shown that Gracilaria red algae extracts have beneficial antihypercholesterolemic, antioxidant, anti-inflammatory, and antimicrobial effects. In this study, we investigated the antioxidant effects of Gracilaria vermiculophylla extracts (GV-Ex) on human bone marrow mesenchymal stem cells (hBM-MSCs). The acetone and DMSO/ethanol solvents of the tested GV contain higher total flavonoid and polyphenolic contents that can strongly scavenge reactive oxygen species (ROS). Pre-treatment with GV-Ex protected hBM-MSCs against oxidative stress induced by hydrogen peroxide treatment. The protective effects of GV-Ex treatment were confirmed by MTT assay. The elevated levels of ROS in hBM-MSCs caused by hydrogen peroxide induced oxidative stress were significantly decreased by GV extract treatment. The levels of the antioxidant proteins superoxide dismutase 1 (SOD1), superoxide dismutase 2 (SOD2), and catalase (CAT) were also restored or protected by GV-Ex treatment, suggesting that GV extracts moderate excess ROS levels and prevent cells from oxidative damage.

• Composites Research
• /
• 제23권3호
• /
• pp.58-63
• /
• 2010

MWCNT의 형상비 차이에 따른 MWCNT/에폭시 복합재료의 인장 및 굽힘 특성과 전기전도도를 비교하였다. 호모믹서(homomixer)와 3단롤밀(three-roll mill)을 사용하여 분산된 MWCNT와 에폭시 혼합물을 금형에 부어 압축 성형법으로 시편을 제조하였다. 에폭시 내 MWCNT의 분산 정도를 평가하기 위해 SEM을 사용하여 시편의 파단면을 관찰하였다. MWCNT의 첨가로 인해 인장강도는 최대 7%증가 하였으나 굽힘강도는 증가가 미미하였으며 형상비가 가장 큰 MWCNT의 경우에는 감소하였다. MWCNT 포함량을 변화시켰을 때 CM-95의 경우 인장강도는 1wt%에서, 굽힘강도는 0.5wt%에서 최대값을 보였으나 더 많은 포함량에서는 감소하였다. MWCNT/에폭시 복합재료의 두께 방향 및 면내방향 전기전도도는 2단자법에 의한 저항값으로부터 계산되었으며 MWCNT의 형상비가 클수록, 또 포함량이 증가할수록 전기전도도 값은 증가하였다.

• Journal of Chest Surgery
• /
• 제53권1호
• /
• pp.1-7
• /
• 2020

Background: The aim of this study was to evaluate the short-term and long-term results of surgical treatment for native valve endocarditis (NVE) and to investigate the risk factors associated with mortality. Methods: Data including patients' characteristics, operative findings, postoperative results, and survival indices were retrospectively obtained from Hallym University Sacred Heart Hospital. Results: A total of 29 patients underwent surgery for NVE (affecting the mitral valve in 20 patients and the aortic valve in 9) between 2003 and 2017. During the follow-up period (median, 46.9 months; interquartile range, 19.1-107.0 months), the 5-year survival rate was 77.2%. In logistic regression analysis, body mass index (p=0.031; odds ratio [OR], 0.574; 95% confidence interval [CI], 0.346-0.951), end-stage renal disease (ESRD) (p=0.026; OR, 24.0; 95% CI, 1.459-394.8), and urgent surgery (p=0.010; OR, 34.5; 95% CI, 2.353-505.7) were significantly associated with in-hospital mortality. Based on Cox proportional hazard regression analysis, the statistically significant predictors of long-term outcomes were hypertension, ESRD, and urgent surgery. Conclusion: Surgical treatment for NVE is associated with considerable mortality. The in-hospital mortality and 5-year survival rates of this study were 13.8% and 77.2%, respectively. Underlying conditions, including hypertension and ESRD, and urgent surgery were independent risk factors for unfavorable outcomes.

• Tuberculosis and Respiratory Diseases
• /
• 제46권6호
• /
• pp.811-816
• /
• 1999

Background : Nausea and vomiting associated with chemotherapy are common side effects which remain difficult to control. Acute phase nausea and vomiting (0-24 hours after induction of chemotherapy) parallels plasma serotonin release, which explains the effectiveness of $5-HT_3$ receptor antagonists. Serotonin released from gastrointestinal enterochromaffin cells may mediate chemotherapy-induced emesis. In this study, we analyzed urinary excretion of 5-HIAA, the main metabolite of serotonin. Methods : Eight men and four women were studied in their cisplatin chemotherapy cycle. Urinary 5-hydroxyindoleaoetic aicd (HIAA) levels were determined before and during a 24-hour period under ondansetron prophylaxis. Results : Urinary 5-HIAA excretion for a 24-hour period was increased in all patients after induction of cisplatin (P=0.002). Conclusion : Cisplatin chemotherapy is associated with serotonin release in the acute phase. Our finding may provide evidence for a relationship between emesis and serotonin following cisplatin chemotherapy.

• 대한임상독성학회지
• /
• 제11권1호
• /
• pp.23-27
• /
• 2013

Zoletil is a non-opioid, non-barbiturate animal anesthetic and proprietary combination of two drugs, a dissociative anesthetic drug, tiletamine, with the benzodiazepine anxiolytic drug, zolazepam. Zoletil has greater potency than ketamine. Zoletil is abused for recreational purposes, especially by people with easy access to medicine. However, in Korea, it is available over-the-counter. Here we report on a case of an 83-year-old woman who received injection of seven vials of "Zoletil 50" by her daughter and presented with an altered mental change. Her mental state was stupor and vital sign was hypotension, bradycardia. Her blood tests indicated metabolic and respiratory acidosis and hyperkalemia. She was treated with intravenous naloxone and flumazenil but was not responsive. She was admitted to the ICU and treated with supportive therapy. Her mental state showed transient recovery, however, her clinical manifestation worsened and she expired.