• 한국측량학회지
• /
• 제30권3호
• /
• pp.295-303
• /
• 2012

풍력발전 단지의 수익성 평가를 위해 연간 에너지 생산량(AEP ; Annual Energy Production)의 계산이 중요하다. AEP를 계산하기 위해서는 바람의 확률밀도함수(PDF ; Probability Density Function)와 풍력발전기의 발전곡선(PC; Power Curve)이 필요하며, AEP 예측의 정확성을 향상시키기 위해서는 허브 높이에서의 PDF예측과 그 높이의 공기밀도에 따른 풍력발전기 PC의 결정이 중요하다. 본 연구에서는 제주도 한동, 평대의 실관측 풍황탑(met mast) 자료를 이용하였으며 풍속의 PDF를 Weibull 분포 함수로 가정 하였고 Weibull 함수의 파라미터의 값이 높이에 따라 변화하는 양상을 확인하였다. Weibul 함수의 계산은 모멘트법과 LN-least법을 사용하였으며, 모멘트법과 LN-least법에 의한 형상계수의 경우 높이의 증가에 따라 변화를 보이지 않았고 평균값에서 ${\pm}0.1$의 변화 패턴을 보였다. 척도계수의 경우 높이가 증가함에 따라 선형적으로 증가하였으며 지형별 분류에 따른 높이별 척도계수의 기울기는 확연한 차이를 보이고 있었다. 60m 높이에서 관측된 바람의 상대도수와 관측 값의 높이 보정에 의한 공기밀도와 일반식에 의한 공기밀도를 각각 계산하여 그 결과에 대응하는PC를 선택하여 AEP차이를 계산하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권12호
• /
• pp.1644-1650
• /
• 2011

This study was conducted to detect quantitative trait loci (QTL) affecting meat quality in an $F_2$ reference population of Korean native pig and Landrace crossbreds. The three-generation mapping population was generated with 411 progeny from 38 $F_2$ full-sib families, and 133 genetic markers were used to produce a sex-average map of the 17 autosomes. The data set was analyzed using least squares Mendelian and parent-of-origin interval-mapping models. Lack-of-fit tests between models were used to characterize the QTL for mode of gene expressions. A total of 10 (32) QTL were detected at the 5% genome (chromosome)-wise level for the analyzed traits. Of the 42 QTL detected, 13 QTL were classified as Mendelian, 10 as paternal, 14 as maternal, and 5 as partial expressed QTL, respectively. Among the QTL detected at 5% genome-wise level, four QTL had Mendelian mode of inheritance on SSCs 5, 10, 12, and 13 for cooking loss, drip loss, crude lipid and crude protein, respectively; two QTL maternal inheritance for pH at 24-h and shear force on SSC11; three QTL paternal inheritance for CIE b and Hunter b on SSC9 and for cooking loss on SSC15; and one QTL partial expression for crude ash on SSC13, respectively. Most of the Mendelian QTL (9 of 13) had a dominant mode of gene action, suggesting potential utilization of heterosis for genetic improvement of meat quality within the cross population via marker-assisted selection.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권5호
• /
• pp.669-676
• /
• 2007

This study was conducted to detect quantitative trait loci (QTL) affecting growth and body composition in an $F_2$ reference population of Korean native pig and Landrace crossbreds. The three-generation mapping population was generated with 411 progeny from 38 $F_2$ full-sib families, and 133 genetic markers were used to produce a sex-average map of the 18 autosomes. The data set was analyzed using least squares Mendelian and parent-of-origin interval-mapping models. Lack-of-fit tests between the models were used to characterize QTL for mode of expressions. A total of 8 (39) QTL were detected at the 5% genome (chromosome)-wise level for the 17 analyzed traits. Of the 47 QTL detected, 21 QTL were classified as Mendelian expressed, 13 QTL as paternally expressed, 6 QTL as maternally expressed, and 7 QTL as partially expressed. Of the detected QTL at 5% genome-wise level, two QTL had Mendelian mode of inheritance on SSC6 and SSC9 for backfat thickness and bone weight, respectively, two QTL were maternally expressed for leather weight and front leg weight on SSC6 and SSC12, respectively, one QTL was paternally expressed for birth weight on SSC4, and three QTL were partially expressed for hot carcass weight and rear leg weight on SSC6, and bone weight on SSC13. Many of the Mendelian QTL had a dominant (complete or overdominant) mode of gene action, and only a few of the QTL were primarily additive, which reflects that heterosis for growth is appreciable in a cross between Korean native pig and Landrace. Our results indicate that alternate breed alleles of growth and body composition QTL are segregating between the two breeds, which could be utilized for genetic improvement of growth via marker-assisted selection.

• Environmental Engineering Research
• /
• 제15권2호
• /
• pp.63-70
• /
• 2010

In this study, the response surface method and experimental design were applied as an alternative to conventional methods for the optimization of coagulation tests. A central composite design, with 4 axial points, 4 factorial points and 5 replicates at the center point were used to build a model for predicting and optimizing the coagulation process. Mathematical model equations were derived by computer simulation programming with a least squares method using the Minitab 15 software. In these equations, the removal efficiencies of turbidity and total organic carbon (TOC) were expressed as second-order functions of two factors, such as alum dose and coagulation pH. Statistical checks (ANOVA table, $R^2$ and $R^2_{adj}$ value, model lack of fit test, and p value) indicated that the model was adequate for representing the experimental data. The p values showed that the quadratic effects of alum dose and coagulation pH were highly significant. In other words, these two factors had an important impact on the turbidity and TOC of treated water. To gain a better understanding of the two variables for optimal coagulation performance, the model was presented as both 3-D response surface and 2-D contour graphs. As a compromise for the simultaneously removal of maximum amounts of 92.5% turbidity and 39.5% TOC, the optimum conditions were found with 44 mg/L alum at pH 7.6. The predicted response from the model showed close agreement with the experimental data ($R^2$ values of 90.63% and 91.43% for turbidity removal and TOC removal, respectively), which demonstrates the effectiveness of this approach in achieving good predictions, while minimizing the number of experiments required.

• Current Optics and Photonics
• /
• 제1권3호
• /
• pp.186-195
• /
• 2017

Obtaining accurate visibility measurements is a common atmospheric optical problem, and of vital significance to civil aviation. To effectively evaluate and improve the accuracy of visibility measurements, an outdoor atmospheric simulation chamber with dimensions of $1.8{\times}1.6{\times}55.7m^3$ was constructed. The simulation chamber could provide a relatively homogeneous haze environment, in which the visibility varied from 10 km to 0.2 km over 5 hours. A baseline-changing visibility measurement system was constructed in the chamber. A mobile platform (receiver) was moved from 5 m to 45 m, stopping every 5 m, to measure and record the transmittance. The total least-squares method was used to fit the extinction coefficient. During the experiment conducted in the chamber, the unit weight variance was as low as $1.33{\times}10^{-4}$ under high-visibility conditions, and the coefficient of determination ($R^2$) was as high as 0.99 under low-visibility conditions, indicating high stability and accuracy of the system used to measure the extinction coefficients and strong consistency between repeated measurements. A Grimm portable aerosol spectrometer (PAS) was used to record the aerosol distribution, and then Mie theory was used to calculate the extinction coefficients. The theoretical results were found to be consistent with the measurements and exhibited a positive correlation, although they were higher than the measured values.

• Fisheries and Aquatic Sciences
• /
• 제17권3호
• /
• pp.361-367
• /
• 2014

Cuttlefish Sepia esculenta are commercially important in Korea. Assessments of their biomass currently depend on fishery-landings data, which may be biased. Towards fishery-independent acoustic surveys of cuttlefish, target strength (TS) measurements at 70 and 120 kHz were made of 23 live cuttlefish, in early May 2010. The fish were caught by traps in the inshore waters around Geojedo, Korea. The TS were measured using split-beam echosounders (Simrad ES60 and EY500, respectively). The cuttlefish mantle lengths (L) ranged from 15.6 to 23.5 cm (mean L=17.8 cm) and their masses (W) ranged from 335 to 1020 g (mean W=556.1 g). Their mean TS values at 70 and 120 kHz were -33.01 dB (std=1.39 dB) and -31.76 dB (std=2.15 dB), respectively. The mean TS at 70 kHz was 0.17 dB higher than the TS-length relationship resulting from a least-squares fit to the data ($TS=24.67{\log}_{10}L(cm)-64.03$, $r^2$ = 0.52, N=23). The mean TS at 120 kHz was 0.45 dB higher than the fitted TS-length relationship ($TS=40.59{\log}_{10}L(cm)-82.96$, $r^2$ = 0.58, N=23). The differences between the mean TS values and an equation regressed from all of the TS measurements at both frequencies ($TS=24.92{\log}_{10}L(cm)-4.92{\log}_{10}{\lambda}(m)-22.82$, $r^2$ = 0.86, N=46) was 0.22 dB at 70 kHz and 0.31 dB at 120 kHz, respectively.

• 대한토목학회논문집
• /
• 제7권4호
• /
• pp.133-138
• /
• 1987

평면 삼변망의 조정에 적용되는 정밀방법은 대개 최소제곱법이 적용된다. 이미 알고 있는 방법으로써 관측 방정식이나 조건 방정식은 예외 없이 모두 비선형이다. 조건 방정식에서 보정을 위한 계수식은 매우 길고 복잡하다. 본 논문에서는 조건 방정식이 선형이고 보정계수가 매우 간단하게 계산되고 검산되어 질 수 있는 새로운 기법을 제시하였다. 본 연구에서 택한 방법에서는 삼변망의 관측거리는 잉여관측값을 갖는 형태의 것으로 간주하였다. 만약 이 잉여관측변이 관측오차를 갖는다면 완전한 망을 이루기 위해서는 기준선 방향의 영향이 다른 변의 길이에 변화를 가져오게 된다. 이 변화를 최소일의 원리를 적용하므로서 해석할 수 있었다. 이 방법에 의하여 망조정을 분석한 결과 폐합비가 약 1/145,000으로 매우 양호하여 평면 삼변망의 해석에 유용하게 이용될 수 있음을 입증하였다.

• 융합정보논문지
• /
• 제11권4호
• /
• pp.35-45
• /
• 2021

모바일 또는 웹을 활용한 e-커머스 산업은 빠른 성장세에 있으며, 다양한 플랫폼 서비스 출현으로 e-커머스 산업은 혁신적인 변화를 일으키고 있다. 본 연구는 e-커머스 이용자들의 애착유형요인들에 대해 파악하고 이들 요인이 지각된 사용용이성과 지각된 유용성에 기반한 기술수용모형(Technology Acceptance Model)에 얼마만큼의 영향을 미치는지와 수용의도 간의 인과관계를 실증 연구함으로써 e-커머스 서비스에서 효과적이고 효율적인 발전방안을 제시하고자 한다. 본 연구의 연구모형을 실증적으로 검증하기 위해 e-커머스를 이용한 경험이 있는 일반인들을 대상으로 설문조사를 실시하였으며 PLS(Partial Least Squares)를 활용한 내적 일관성, 확인적 요인분석, 판별 타당성, 적합도 검증을 통해 경로분석을 실시하였다. 그 결과, 지각된 안정과 지각된 유용성 및 지각된 사용용이성 간의 유의미한 인과관계를 확인해 볼 수 있었으며 TAM과 수용의도와의 연관성을 검증해 볼 수 있었다.

• 인간식물환경학회지
• /
• 제24권6호
• /
• pp.629-638
• /
• 2021

Background and objective: This study was conducted to develop diameter growth models for thinned Quercus glauca Thunb. (QGT) stands to inform production goals for treatment and provide the information necessary for the systematic management of this stands. Methods: This study was conducted on QGT stands, of which initial thinning was completed in 2013 to develop a treatment system. To analyze the tree growth and trait response for each thinning treatment, forestry surveys were conducted in 2014 and 2021, and a one-way analysis of variance (ANOVA) was executed. In addition, non-linear least squares regression of the PROC NLIN procedure was used to develop an optimal diameter growth model. Results: Based on growth and trait analyses, the height and height-to-diameter (H/D) ratio were not different according to treatment plot (p > .05). For the diameter of basal height (DBH), the heavy thinning (HT) treatment plot was significantly larger than the control plot (p < .05). As a result of the development of diameter growth models by treatment plot, the mean squared error (MSE) of the Gompertz polymorphic equation (control: 2.2381, light thinning: 0.8478, and heavy thinning: 0.8679) was the lowest in all treatment plots, and the Shapiro-Wilk statistic was found to follow a normal distribution (p > .95), so it was selected as an equation fit for the diameter growth model. Conclusion: The findings of this study provide basic data for the systematic management of Quercus glauca Thunb. stands. It is necessary to construct permanent sample plots (PSP) that consider stand status, location conditions, and climatic environments.

• 만화애니메이션 연구
• /
• 통권40호
• /
• pp.337-365
• /
• 2015

본 연구의 목적은 소셜네트웍게임에서 사용자 중독에 대한 새로운 모델을 제안하고자 한다. 본 모델은 논리적 특성과 정서적 특성에서 유래한다. 논리적 특성은 기능(F), 키스트록(K), 목표(G)로 구성된다. 정서적 특성은 감정(E), 사교(S), 감성(A)으로 구성된다. 30명의 참가자를 통해서 예비조사를 실시하여 설문문항의 적합성, 대략적인 모형의 타당성 및 연구의 방향성 등을 점검하였다. 이후 본 연구에서 300명의 피험자를 대상으로 조사를 실시하였다. 그중 261명만 채택하였다. 왜냐하면 39명은 SNG 게임을 전혀 해보지 않았으며 설문 응답에 불성실하게 이행하여 본 연구에서 제외하였다. 본 연구는 부분최소자승-구조방정식모델링 기법을 활용하여 가설검증을 하였다. 그 결과 모형적합도가 높게 나타났으며 12가지 가설 가운데 11가지가 유의미한 효과가 발생하였다(H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H12). 그러나 유일한 가설 H11인 소셜네트워크중독과 키스트록 간에는 유의미한 효과가 발생하지 않았다. 본 연구는 소셜네트워크게임 개발을 위한 사용자 행동을 이해하며 중독의 기저를 밝히는데 기초가 되는 탐색적 연구가 될 것으로 기대된다.