• 한국인터넷방송통신학회논문지
• /
• 제20권1호
• /
• pp.89-93
• /
• 2020

본 논문에서는 Ku-대역 소형 도플러 레이다용 수신부를 설계 및 제작하였다. 제작된 수신부는 총 5개의 수신 경로를 갖는 초고주파수신기와 중간주파수신기로 구성된다. 초고주파수신기의 초단에는 송신 누설 신호로부터 보호하기 위한 리미터가 적용되었으며, 최대 입력전력은 2 W이상이 되도록 설계 되었다. 중간주파수신기는 모드 선택 스위치를 통해 광대역 경로와 협대역 경로를 선택할 수 있게 설계하였다. 제안된 수신부는 이득 68 dB, 잡음지수 3.7 dB, 리미터 회복시간 93 ns가 측정되었다. 본 논문에서 제시한 수신부를 이용하여 Ku-대역 소형 도플러 레이다에 바로 적용이 가능할 것으로 예상한다.

• Journal of electromagnetic engineering and science
• /
• 제18권3호
• /
• pp.188-198
• /
• 2018

In this study, we propose an approach for the design and satisfy the requirements of the fabrication of a small, lightweight, reliable, and stable ultra-wideband receiver for millimeter-wave bands and the contents of the approach. In this paper, we designed and fabricated a stable receiver with having low noise figure, flat gain characteristics, and low noise characteristics, suitable for millimeter-wave bands. The method uses the chip-and-wire process for the assembly and operation of a bare MMIC device. In order to compensate for the mismatch between the components used in the receiver, an amplifier, mixer, multiplier, and filter suitable for wideband frequency characteristics were designed and applied to the receiver. To improve the low frequency and narrow bandwidth of existing products, mathematical modeling of the wideband receiver was performed and based on this spurious signals generated from complex local oscillation signals were designed so as not to affect the RF path. In the ultra-wideband receiver, the gain was between 22.2 dB and 28.5 dB at Band A (input frequency, 18-26 GHz) with a flatness of approximately 6.3 dB, while the gain was between 21.9 dB and 26.0 dB at Band B (input frequency, 26-40 GHz) with a flatness of approximately 4.1 dB. The measured value of the noise figure at Band A was 7.92 dB and the maximum value of noise figure, measured at Band B was 8.58 dB. The leakage signal of the local oscillator (LO) was -97.3 dBm and -90 dBm at the 33 GHz and 44 GHz path, respectively. Measurement was made at the 15 GHz IF output of band A (LO, 33 GHz) and the suppression characteristic obtained through the measurement was approximately 30 dBc.

• 공업화학
• /
• 제9권2호
• /
• pp.268-272
• /
• 1998

액체금속로 냉각재인 액체 소듐에서 시편의 누출특성을 소듐-물 반응 실험에 의해 조사하였다. 소듐-물 반응 현상의 확인은 물 누출 실험 전후에 Fe, Cr 및 Ni 등과 같은 시편의 조성 변화로 확인하였다. $100kg/cm^2$의 누출 압력으로 4시간 동안 시편의 누출 경로를 통해 물을 누출시킨 결과, 누출경로에서 소듐-물 반응생성물들이 침적되어 있는 것을 확인하였으나, 부식에 의해 누출경로가 완전 파열되어 다량의 수증기가 액체 소듐속으로 빠져나가는 re-openning 현상은 관찰되지 않았다. 시편의 누출경로가 막히는 self-plugging 현상은 소듐-물 반응에 의한 반응생성물과 시편의 부식에 의한 부식 생성물이 주 원인으로 추정되고, re-openning 현상은 시편의 누출경로에서 열적인 transient로 추정되었다.

• Tribology and Lubricants
• /
• 제37권4호
• /
• pp.117-124
• /
• 2021

In this study, we perform a 3D CFD conjugate analysis according to the shape of the foil ramp of the air foil thrust bearing, analyze the flow characteristics inside the bearing, and compare the results corresponding to the two shapes. Air has a lower viscosity than lubricating oil. Therefore, the thrust runner of the bearing must rotate at high speed to support the load. The gap between thrust runner and foil is significantly smaller than that of the oil bearing. Hence, it is crucial to analyze the complex flow characteristics inside the bearing to predict the complex flow inside the bearing and performance of the bearing. In addition, flow characteristics may appear differently depending on the ramp shape of the bearing foil, which may affect bearing performance. In this study, we numerically analyze the main flow path of air flowing into the bearing and the secondary flow path used for cooling the bearing using the commercial CFD software ANSYS CFX and compare the flow characteristics for straight and curved foil ramp shapes. Notably, there is a difference in the speed of the flowing air according to the shape of the ramp, which affects the bearing performance.

• Progress in Superconductivity
• /
• 제14권2호
• /
• pp.122-127
• /
• 2012

Current leads are one of the important components for carrying the current to the coil in the superconducting magnet system. Heat leakage through the current lead is the major factor of entire heat load in the cryogenic system because current leads carry the current from room temperature to near 4 K, connecting thermally each other. Therefore, minimization heat load through current lead can reduce the operating temperature of superconducting magnet. The semi-retractable current lead, composed of multi-contact connector and HTS element, is one of good options. Comprehension of Multi-contact connector's structure, contact resistance and heat generation is essential for estimating heat generation in current leads. Multi-contact connector has several louvers inside of socket and the shape, number, size of louvers are different with the size of connector. Therefore contact area, current path and contact resistance are also different. In this study, the contact resistance in multi-contact connector is measured using the electrical power as a function of connector's size and temperature. Also, the unique correlation of electrical contact resistance is derived and heat generation is estimated for superconducting magnet application.

• 한국가스학회지
• /
• 제13권2호
• /
• pp.1-6
• /
• 2009

누설전류는 의도된 회로 이외의 경로로 흐르는 전류를 말하며, 일반적으로 도시철도의 급전 시스템은 레일을 부극선으로 사용하기 때문에 레일이 대지와 완벽하게 절연되어 있지 않다면 레일을 통해 흐르는 전류의 일부는 누설전류로 땅속을 흐르게 된다. 이때 토양을 통해 누설 전류가 유출되는 레일과 지하매설 금속구조물에서 전식이 발생하게 된다. 본 논문에서는 국내 도시철도 운행지역 인근 지하매설 금속구조물의 전식방지 현황을 설문조사를 통하여 조사하였다.

• 전력전자학회논문지
• /
• 제17권3호
• /
• pp.230-237
• /
• 2012

This paper proposes an active-clamp ac-dc converter with direct power conversion that has a simple structure and achieves high efficiency. The proposed converter is derived by integrating the step-down ac chopper and the output-voltage doubler. The proposed converter provides direct ac-dc conversion and dc output voltage without using any full-bridge diode rectifier. The step-down ac chopper using an active-clamp mechanism serves to clamp the voltage spike across the main switches and provides zero-voltage turn-on switching. The resonant-current path formed by the leakage inductance of the transformer and the resonant capacitor of the output-voltage doubler achieves the zero-current turn-off switching of the output diodes. The operation principle of the converter is analyzed and verified. A 500W prototype is implemented to show the performance of the proposed converter. The prototype provides maximum efficiency of 95.1% at the full load.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1131-1137
• /
• 2015

Gallium nitride (GaN) is a promising material for next-generation high-power applications due to its wide bandgap, high breakdown field, high electron mobility, and good thermal conductivity. From a structure point of view, the vertical device is more suitable to high-power applications than planar devices because of its area effectiveness. However, it is challenging to obtain a completely upright vertical structure due to inevitable sidewall slope in anisotropic etching of GaN. In this letter, we design and analyze the enhancement-mode n-channel vertical GaN MOSFET with variation of sidewall gate angle by two-dimensional (2D) technology computer-aided design (TCAD) simulations. As the sidewall slope gets closer to right angle, the device performances are improved since a gradual slope provides a leakage current path through the bulk region.

• 전력전자학회논문지
• /
• 제9권1호
• /
• pp.65-72
• /
• 2004

본 논문에서는 새로운 형태의 부스트 입력방식의 공진형 AC/DC 컨버터를 제안하였다. 제안된 컨버터는 교류 전원측의 역률개선과 컨버터 출력전압을 동시에 제어하는 단일단 역률 개선방식으로써 전류 연속모드 펄스폭 변조방식을 통해 99%의 고역률을 얻을 수 있으며, 변압기 누설 인덕턴스와 공진 커패시터간의 공진을 이용하여 영전압스위칭을 구현할 수 있기 때문에 스위칭 손실을 줄일 수 있다. 제안된 컨버터의 이론적 고찰을 위해 각 모드별 전류로를 통해 동작을 설명하였으며, 정상상태에서의 DC해석을 이용한 공진특성 분석을 하였다. 본 논문에서는 제안된 컨버터의 유효성 확인을 위해 입력 $120[V_AC],\; 출력\; 48[V_DC],\; 4[A]\; 200[W]$급 프로토타입 컨버터를 제작하였으며 실험을 통해 얻은 결과를 제시함으로써 이를 증명하였다.

• 한국진공학회지
• /
• 제18권5호
• /
• pp.390-393
• /
• 2009

유기물 기반의 전자 소자에서 소자간의 전기적인 전류 흐름 및 기생저항 등을 차단하기 위하여 표면 에너지를 이용한 새로운 패터닝 기법을 제안하였다. 소수성의 perfluoro-alkyl fluorosilanes을 플라즈마 이온 에칭을 이용하여 선택적으로 친수성으로 변환한 뒤 wettability 현상을 통해 유기 물질을 자동 패터닝 하였다. 또한 이 기법을 이용하여 $V_{oc}$ (open circuit voltage): 482 mV, $J_{sc}$ (short circuit current density): 2.4 mA/$cm^2$, FF (Fill factor): 0.58, $\eta$ (Efficiency): 0.95 % 의 특성을 보이는 bulk-이종접합 유기 태양 전지 소자를 제작하였다.