• Korean Journal of Acupuncture
• /
• v.22 no.3
• /
• pp.17-26
• /
• 2005

Objectives : The aim of this study is to investigate the effect of Shinmun-acupuncture stimulation on the relationship of change in electrocardiopgraphy (ECG). Methods : For this purpose, 11 healthy volunteers were acupunctured at Shinmun acupoint using the reinforcing or reducing by inserting the needle in the same direction as the channel runs or in the opposite direction (迎隨補瀉). Then, we measured and observed the change of standard leads I, II and III in ECG. Results : In lead I , acupuncture treated groups were increased the activity of PR interval and PR segment compared to the control group. In lead II, during the acupuncture treated group by inserting the needle in the opposite direction as the channel runs was increased the activity of T wave duration, and after the acupuncture group by inserting the needle in the same direction as the channel runs was increased the activity of PR interval. In lead III, acupuncture treated groups were increased the activity of ST duration, PR interval and QT interval. Conclusions : These results suggested that Shinmun acupuncture stimulation plays an important role on the activities of ECG.

• Journal of Korean Institute of Industrial Engineers
• /
• v.7 no.1
• /
• pp.13-20
• /
• 1981

Three inspection-ordering policies of a part with three types of lead times, i. e., expedited lead time, special lead time and regular lead time are considered. Policy I : The original part is replaced by a spare immediately after delivery, even if the original part is still operating. Policy II : The delivered spare is put into inventory until the original part failes. Policy III : The original part is inspected once again immediately after the delivery of the spare. If it is in a good state, the original part is used up to its mean degradation time, then replaced. If it is in a degradation state, the original part is replaced by a spare. A cost effectiveness for each policy is analyzed. Optimal inspection-ordering policy which maximizes a cost effectiveness is obtained. Time to degradation distribution and time to failure distribution are assumed to be Weibull and exponential, respectively. Variations of policies are observed with respect to variations of associated costs.

• Advances in environmental research
• /
• v.11 no.1
• /
• pp.31-38
• /
• 2022

The current observational epidemiological study analyzed blood lead levels (BLLs) in occupationally exposed workers from Riyadh region, Saudi Arabia and correlated them with the alterations in the differential cell populations of the WBC panel (lymphocytes [Lym %], mixed [Mid %] cells, and neutrophils [Neu %]). In addition, we examined the effect of confounding factors and their relation to BLLs. BLLs were estimated using the LeadCare II analyzer and hematological parameters using the ADVIA 120 analyser. An inferential analysis was conducted to detect association between the observations and the subjects' clinical characateristics. A total of 132 male subjects were included in the final analyses. Based on CDC guidelines, the subjects were categorized as Group I (BLL <10 ㎍/dL; n=118) or Group II (BLL >10 ㎍/dL; n=14) with average BLLs of 4.4 ㎍/dL and 18.1 ㎍/dL, respectively (p <0.0001). The percentages of Mid cells (p <0.0001) and neutrophils (p=0.048), were significantly altered in subjects with High BLL. A regression analysis indicated that subjects > 50 years of age had significantly higher BLLs (53.2 ㎍/dL) than younger age sub-groups (p <0.0001). Age, education, and profession were significant predictors for lead toxicity. Pb exposure is a major public health issue in Saudi Arabia and calls for further investigations on the cellular and molecular effects on hematological system.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.335-345
• /
• 2009

This paper presents investigations on 60 glass beads excavated from floorless tombs of Eunpyeong Newtown site to figure out composition and lead isotope ratio by SEM-EDS and TIMS, which show the difference between their compositions and Pb provenance of lead glass. The results of the composition analysis are that excavated glass are mainly divided into Potash glass($K_2O$-CaO-$SiO_2$) and Potash-lead glass($K_2O$-PbO-$SiO_2$) and the samples excavated from III-3 floorless tombs No.1005 are presumed not glass but Quartz. The transparent 9 lead glasses excavated from II-3 floorless tomb No.101 and III-3 floorless tomb No.908 seem to be manufactured by the same raw material at same site because the concentration of their compositions are well accorded with each other and deviations of them are very limited. As a result of principal component analysis(PCA), glass beads excavated are largely assort to two groups, Potash glass and Potash lead glass as well. That is, glass beads excavated from Eunpyeoung Newtown sites are quite different two types of main composition. In addition, the results of Pb provenance analysis used in lead glass confirm that most lead glass are significantly correlated with galena of northern China.

• 대한예방의학회:학술대회논문집
• /
• 1994.02a
• /
• pp.549-559
• /
• 1994

A subgroup or workers from a secondary lead smelter was defined to include those with blood lead levels not exceeding $80{\mu}g/100\;ml$ and with no pest history of elevated blood lead. Central nervous system symptoms (tiredness, sleeplessness, irritability, headache) were reported by 55% of the group and muscle and joint pain by 39%. Zinc proteporphyrin (ZPP) levels were elevated in 71% or cases. Low hemoglobin levels (less than 14 gm/l00 ml) were round in more than a third of the workers. While BUN and creatinine were mostly in the normal range, there - nevertheless n correlation between ZPP and both BUN and creatinine. Reduced nerve-conduction velocities were present in 25% or the group; this was not significantly different from findings in Ii control group. The data indicate that n blood level of $80{\mu}g/100\;ml$ is an inappropriate biological guide in the prevention or lead disease.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3391-3398
• /
• 2013

The carboxylated multiwall carbon nanotubes (MWCNT-COOH) and functionalized with isatin derivative (MWCNT-isatin) have been used as efficient adsorbents for the removal of lead (Pb) from aqueous solutions. The influence of variables including pH, concentration of the lead, amount of adsorbents and contact time was investigated by the batch method. The adsorption of the lead ions from aqueous solution by modified MWCNTs was studied kinetically using different kinetic models. The kinetic data were fitted with pseudo-first-order, pseudo-second-order, and intra-particle diffusion models. The sorption process with MWCNT-COOH and MWCNT-isatin was well described by pseudo-second-order and pseudo-first-order kinetics, respectively which it was agreed well with the experimental data. Also, it involved the particle-diffusion mechanism. The values of regression coefficient of various adsorption isotherm models like Langmuir, Freundlich and Tempkin to obtain the characteristic parameters of each model have been carried out. The Langmuir isotherm was found to best represent the measured sorption data for both adsorbent.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.930-934
• /
• 2005

A chloroform membrane system containing a given mixture of benzylaza-12-crown-4 and oleic acid is introduced for the selective and efficient transport of $Pb^{2+}$ ion. The transport was capable of moving metal ions ‘up-hill’. In the presence of ${S_2O_3}^{2-}$ion as a suitable metal ion acceptor in the receiving phase, the amount of lead ion transport across the liquid membrane after 150 minutes is (95.0 ${\pm}$ 1.7)%. The selectivity and efficiency of lead transport from aqueous solution containing $Tl^+,\;Ag^+,\;Mg^{2+},\;Ca^{2+},\;Co^{2+},$ $Ni^{2+},\;Cu^{2+},\;Zn^{2+},\;Hg^{2+}$ and $Cd^{2+}$were investigated. In the presence of thiosulfate as a suitable masking agent in the source phase, the interfering effects of $Ag^+\;and\;Cu^{2+}$ were diminished drastically.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.386-389
• /
• 2000

Polysaccharides are very effective adsorbents for heavy metals. In this study, the adsorption characteristics of various polysaccharides for heavy metal adsorption were investigated. Tested polysaccharides were homogeneous polysaccharides such as curdlan, chitin, starch, cellulose, Avicel, and Solka floc and heterogeneous polysaccharides such as zooglan, locust bean gum, ghatti gum, pectin, and xylan. Lead(II) adsoption characteristic on these polysaccharides followed Freundlich isotherm and the isotherm parameters were calculated. For adsorption of lead(ll), Avicel, starch, and zooglan were found to be good adsorbents.

• Journal of Sensor Science and Technology
• /
• v.29 no.5
• /
• pp.360-364
• /
• 2020

In this study, the colorimetric sensor, polyester (PET) fabric dyed with lead (II) acetate (Pb(C₂H₃O₂)₂), was fabricated and characterized for the detection of the hydrogen sulfide (H₂S). The surface morphology of the fabric was determined using scanning electron microscope and energy-dispersive X-ray spectroscopy. The optical properties of the fabric were evaluated by measuring the variation in the blue value of an RGB sensor. The fabric showed a significant color change, high linearity (R² : 0.98256), and fast response time (< 1.0 s) when exposed to H₂S. This is because the sensor is highly porous and permeable to the gas. The fabric can not only be used as a hydrogen sulfide sensor but also be used to detect and prevent H₂S influx using sticky tape on pipelines.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.1
• /
• pp.1-8
• /
• 2016

In this study, numerical method was used to assess technical properties and improve the Vietnamese tuna purse seine. The data were extracted from the two national level projects. The study results showed that average lead-line sinking speed reached 0.139 m/s and 0.143 m/s and maximum sinking depth was 61.6 m and 65.8 m for The gears 2003 and 2014 respectively. The maximum tension on ring line of The gear 2003 was 4,742 kgf and 2014 was 4,219 kgf. The improved tuna purse seines I, III and IV showed similar sinking speed results with 0.220 m/s, 0.219 m/s and 0.219 m/s respectively. The average lead-line sinking speed of the improved gear II was lowest with 0.215 m/s. The maximum lead-line sinking depth of the four improved gears I, II, III and IV were 116 m, 112 m, 115 m and 114.9 m respectively. Maximum tension on ring line of the improved gears I, II, III and IV were 5,657 kgf, 5,406 kgf, 5,645 kgf and 5,654 kgf respectively. The improved tuna purse seine IV is the most suitable for Vietnamese tuna purse seine fishery, Which corresponds with tuna purse seiner scale and its fishing supporting equipment at the present.