• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.657-661
• /
• 2003

The elastic moduli or fracture strengths of multi-layered film (SiO$_2$/po1y-Si/SiN/SiO$_2$, 2.77 $\mu\textrm{m}$ thick), CVD diamond film (1.6 $\mu\textrm{m}$ thick), SiO$_2$ film (1.0 $\mu\textrm{m}$ thick) and SiN film (0.43 $\mu\textrm{m}$ thick) made for the membrane of ink-jet printer head were measured with cantilever beam bending method using nanoindenter after fabricating in the form of micro cantilever beam (${\mu}$-CLB). And the elastic moduli of ${\mu}$-CLB of SiO$_2$ film and SiN film were compared with the value of each film on silicon substrate determined with nanoindentation method. The results showed that the modulus and strength of multi-layered film decrease from 68.08 ㎬ and 2.495 ㎬ to 56.53 ㎬ and 1.834 ㎬, respectively as the width of CLB increases from 18.5 $\mu\textrm{m}$ to 58.5 $\mu\textrm{m}$. And the elastic moduli of SiO$_2$ and SiN films measured with ${\mu}$-CLB bending method are 68.16 ㎬ and 215.45 ㎬, respectively and the elastic moduli of these films on silicon substrate measured with nanoindentation method are 98.78 ㎬ and 219.38 ㎬, respectively. These results show that with ${\mu}$-CLB bending technique, moduli can be measured to within 2%.

• The Journal of the Korean dental association
• /
• v.58 no.7
• /
• pp.435-442
• /
• 2020

Porcelain is the first ceramic material to be introduced into dentistry. Porcelain jacket crown was introduced by Dr. Charles H Land in 1886, which was an excellent aesthetic dental restoration but has not been widely used due to high firing shrinkage and low tensile strength. Then metal-ceramic system, which combines the esthetic properties of ceramics and the mechanical properties of metals, was introduced and nowadays it is still used in dental clinical field. However, the metal-ceramic system has shown some problems, such as increased lightness by reflection of light at opaque layer, shadow beneath the gingival line due to the block-out of light by metal coping, exposure of metal in margin part, bond failure between metal and porcelain, oxidation of metal coping during firing the porcelain, etc. Recently, along with the advance of fabrication methods of dental ceramics, the all-ceramic restorations with high esthetic and mechanical properties has increased and gradually replaced metal-ceramic restorations. Especially, CAD/CAM technology has opened a new era in fabricating the dental ceramic restorations. This overview will take a look at the past, present and future possibility of the dental ceramic materials.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.271-274
• /
• 2014

This paper proposes high-performance SAO(Sample Adaptive Offset) in HEVC(High Efficiency Video Coding) encoder for Ultra HD video processing in real time. SAO is a newly adopted technique belonging to the in-loop filter in HEVC. The proposed SAO encoder hardware architecture uses three-layered buffers to minimize memory access time and to simplify pixel processing and also uses only adder, subtractor, shift register and feed-back comparator to reduce area. Furthermore, the proposed architecture consists of pipelined pixel classification and applying SAO parameters, and also classifies four consecutive pixels into EO and BO concurrently. These result in the reduction of processing time and computation. The proposed SAO encoder architecture is designed by Verilog HDL, and implemented by 180k logic gates in TSMC $0.18{\mu}m$ process. At 110MHz, the proposed SAO encoder can support 4K Ultra HD video encoding at 30fps in real time.

• Composites Research
• /
• v.21 no.5
• /
• pp.9-14
• /
• 2008

Carbon nanofibers (CNFs) were used as dielectric lossy materials and NiFe particles were used as magnetic lossy materials. Total twelve specimens for the three types such as dielectric, magnetic and mixed radar absorbing materials (RAMs) were fabricated. Their complex permittivities and permeabilities in the range of $2{\sim}18$ GHz were measured using the transmission line technique. The parametric studios for reflection loss characteristics of each specimen to design the single-layered RAMs were performed. The mixed RAMs generally showed the improved absorbing characteristics with thinner matching thickness. One of the mixed RAMs, MD3with the thickness of 2.00 mm had the 10 dB absorbing bandwidth of 4.0 GHz in the X-band ($8.2{\sim}12.4$ GHz). It also showed very broad 10 dB absorbing bandwidth as wide as 6.0 GHz in the Ku-band ($12.0{\sim}18.0$ GHz) with the thickness tuning to 1.49 mm. The experimental results for selected several specimens were in very good agreements with simulation ones in terms of the overall reflection loss characteristics and 10 dB absorbing bandwidth.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.1-7
• /
• 2020

Recently 5G technology is one of the technologies that has been receiving much positive responses from users as it is integrated with virtual technology. However, 5G's security issues have not been fully resolved and more security is soon required. In this paper, an approach technique is proposed as a probability-based hierarchy to provide personal privacy for 5G-based IoT users more safely. The proposed technique is aimed at not exposing the privacy of IoT users to third parties by using two random keys created personally by IoT users. In order to satisfy both safety and efficiency, the proposed technology divides the privacy of IoT users into two layers. In the first stage, IoT users will control access to intermediate media using anonymous keys generated by IoT users, and in the second stage, information of IoT users registered with servers will be darkened and replicated. The proposed technique has improved the accuracy of the privacy protection of IoT users as they assign weights to layered information after layering users' privacy information on a probabilistic basis.

• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.9-15
• /
• 2021

With the recent development of 5G and artificial intelligence technologies, it is interested in AIOT technology to collect, process, and analyze information in cloud edge environments. AIIoT technology is being applied to various smart environments, but research is needed to perform fast response processing through accurate analysis of collected information. In this paper, we propose a technique to minimize bandwidth and processing time by blocking the connection processing between AIOT information through fast processing and accurate analysis/forecasting of information collected in the smart environment. The proposed technique generates seeds for data indexes on AIOT devices by multipointing information collected by blockchain, and blocks them along with collection information to deliver them to the data center. At this time, we deploy Deep Neural Network (DNN) models between cloud and AIOT devices to reduce network overhead. Furthermore, server/data centers have improved the accuracy of inaccurate AIIoT information through the analysis and predicted results delivered to minimize latency. Furthermore, the proposed technique minimizes data latency by allowing it to be partitioned into a layered multilayer network because it groups it into blockchain by applying weights to AIOT information.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.4
• /
• pp.112-131
• /
• 2009

The Trikaya Banner Painting in the Suta-sa Temple at Hongcheon-gun, Gangwon-do draws attention as it was painted not on flax but on paper, and used the water color painting technique on the sketch rather than the deep color painting technique, which is most common in Buddhist paintings created during the Chosun Dynasty. Nevertheless, there is not any information on the creation of the Trikaya Banner Painting in the painting record on the painting, in Sutasasajeok(壽陀寺史蹟), or in Sutasagogirok(壽陀寺古記錄), so it is uncertain when the painting was created. Furthermore, because it was not drawn by the deep color painting technique, it has been difficult to compare it with other banner paintings. For these reasons, the Trikaya Banner Painting has been studied little except brief introduction. In recent preservation treatment that removed multiple-layered paper from the back of the painting, however, an inked inscription written on Korean paper 118cm high and 87.5cm wide was discovered on the back. It is a kind of placard notifying a number of acts prohibited in order to follow Buddha's teachings correctly, and was found to have been written on April 15, 1690. The inked inscription is a very valuable material for estimating the creation date of the Suta-sa Trikaya Banner Painting, and provides crucial clues for approaching the contents and nature of the painting more precisely. When the image, form, and style of the Suta-sa Trikaya Banner Painting were examined and its creation date was estimated based on the inked inscription, first, the painting is presumed to have been created in around 1690 as suggested by 'the placard' attached on the back instead of a painting record. Second, the painting is highly likely to be the first standing Trikaya banner painting showing the basic icons of Trikaya banner paintings in the Chosun Dynasty since the Trikaya Banner Painting in the Gap-sa Temple in Gongju (1650). Furthermore, considering the shape of the Trikaya in the painting, screen composition, background treatment, solemn and affectionate facial expression, harmonious and adequate body proportion, etc., the painting is believed to have had a considerable influence not only on Trikaya banner paintings of similar style in the 18thcentury but also on deep-color Trikaya banner paintings in the 19thcentury. Third, although the Suta-sa Trikaya Banner Painting is not acompleted work but a sketch, it exhibits the typical water color painting technique in which the strokes are clearly visible. Thus, it is considered highly valuable in understanding and analyzing stroke styles and in studying the history of Buddhist paintings. As there are not many extant banner paintings of the same style in form and expression technique as the Suta-sa Temple Trikaya Banner Painting, this study could not make thorough comparative analysis of the work, but still it is meaningful in that it laid the ground for research on standing Trikaya banner paintings in the 18thand 19thcenturies in the Chosun Dynasty.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.6
• /
• pp.269-275
• /
• 2005

Ni/Ni-aluminide/Ti/Ti-aluminide laminate composite, considered as a functionally gradient material, was manufactured by thin foil hot press technique. Thick intermetallic layers of NiAl and $TiAl_3$ were formed by a self-propagating high-temperature synthesis (SHS) reaction, and thin continuous taters of $Ni_3Al$ and TiAl were formed by a solid-state diffusion. Fracture resistance with loading along the crack arrester direction is higher than crack divider direction due to the interruption of crack growth in metal layers. The $Ni_3Al$ and NiAl intermetallic layer showed cleavage and intergranular fracture behavior, respectively, while the fracture mode of $TiAl_3$ layer was found to be an intragranular cleavage. The debonding between metal and intermetallic layer and the pores were observed in the Ni/Ni-aluminide layers, resulting in the lower fracture resistance. With the results of acoustic emission (AE) source characterization the real time of failure and the effect of AE to crack growth could be monitored.

• Computational Structural Engineering
• /
• v.3 no.3
• /
• pp.113-123
• /
• 1990

The paper is concerned with the elasto-plastic and geometrically nonlinear analysis of shell structures using an improved degenerated shell element. In the formulation of the element stiffness, the combined use of three different techniques was made. They are; 1) an enhanced interpolation of transverse shear strains in the natural coordinate system to overcome the shear locking problem ; 2) the reduced integration technique in in-plane strains to avoid the membrane locking behavior ; and 3) selective addition of the nonconforming displacement modes to improve the element performances. This element is free of serious shear/membrane locking problems and undesirable compatible/commutable spurious kinematic deformation modes. In the formulation for plastic deformation, the concept of a layered element model is used and the material is assumed von Mises yield criterion. An incremental total Lagrangian formulation is presented which allows the calculation of arbitrarily large displacements and rotations. The resulting non-linear equilibrium equations are solved by the Netwon-Raphson method combined with load or displacement increment. The versatility and accuracy of this improved degenerated shell element are demonstrated by solving several numerical examples.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.4
• /
• pp.245-258
• /
• 2008

We describe here how we can use microfluidic technologies for fabricating functional materials that could be potentially utilized in cosmetics; these include void structures, functional particulate materials, shell materials, and multi-layered colloids. We can obtain these functional materials as microfluidic approaches provide precise control over both outer dimensions and inner morphology of emulsion drops in picoliter-volume scales with high throughput. We have confirmed that this technique has a great potential to fabricate novel particles and capsules with a variety of chemical compositions as well as higher orders of layers. This microfluidic approach will allow us to develop a lot of new techniques that are useful for a variety of applications, including delivery systems, chemical separations, bio-sensing, actuators, and so on. We do believe that these new techniques will help cosmetic industry not only give rise advanced functional materials and systems but also widen its product categories.