• 한국환경복원기술학회지
• /
• 제4권1호
• /
• pp.16-23
• /
• 2001

This study was conducted to analyse the relation between physical characteristics of soil surface and wild plants occurrence. Lots of natural occurrence on loamy soil and a little of natural occurrence on perlite. Those were used to observe the wild plants occurrence through the duration. Natural occurrence of wild plants were observed on uniform sand, perlite, loamy soil and 2cms loamy soil layer above the perlite. Uniform sand was compared with different height of drain ditch. The results of analysis were as followed. 1. Wild plants germinated on the uniform perlite layer, they did not grow larger. Because water in large pores of perlite surface drained rapidly and evaporated easily, therefore surface remained low moisture contents. 2. A lot of weed grew on 2cms loamy layer on perlite which stratified above the perlite layer. Because perlite had plenty of soil moisture and soil moisture moved easily from perlite to loamy soil layer. 3. Uniform loamy soil had similar occurrence on the uniform perlite. It was nearly same at surface moisture distribution but lower than layered loamy soil on perlite, and the vertical distributions at soil moisture was totally lower than 2cms loamy soil layer on perlite. 4. Wild plants were grew on uniform sand on different height of drain ditch. In this case, much more wild plants were grew on which had more higher drainage ditch. The number of wild plants occurred when it was affected by soil surface moisture, drain ditch and natural occurrence of wild plants. This could be controlled by layered soil at surface moisture. Therefore weed occurrence can control in planting ground, where soil layer would not be disturbed.

• 농촌계획
• /
• 제24권1호
• /
• pp.113-127
• /
• 2018

This study comprehends that the landscape of Ipsan Village is the accumulated output of the landscape management and social behavior by the historic personages through the reference research and field surveys. And the study sorted out the over-layered landscape characteristics of Ipsan Village by analyzing the dispersed landscape elements as follows. First, right before the start of Japanese invasions to Korea(1592-98), Tamjin(耽津) An(安) Family moved into Ipsan and started establishing the a single clan village. At a site with mountain background and facing the water(背山臨水), the village used to be a typical farming one with an organically planned road-system and housing area following the traditional order. However, the landscape has changed drastically since the 20th century with the construction of banks, roads and readjustment of arable land etc. Second, the original landscape, which can be figured out through the 'Gosanjaesibyukgyeong(高山齋十六景)' in the 18th century, shows its harmony with natural landscape: mountain & valley, stream & field, traditional trees, etc, cultural landscape: village, well, spring, etc, and momentary landscape: seasons, time, weather phenomena, sound, behavior, etc. Third, based on the second, 16 natural landscape elements: mountain & stream, planting, etc. and 25 cultural landscape elements: housing spaces, self-cultivation & ceremony spaces, community spaces and modern education & enlightenment spaces were selected and interpreted as landscaping meanings. Fourth, the over-layered landscape which stems from the compositive functions and inter-connectivity of landscape elements which consists Ipsan Village is regarded as 'Natural geographical and Fungsu landscape', 'Rural production and livelihood landscape', 'Confucian ceremony and symbolic landscape' and 'Modern education and enlightenment landscape.'

• 대한전자공학회논문지SD
• /
• 제48권11호
• /
• pp.18-26
• /
• 2011

본 논문에서는 IEEE 802.11n 무선 랜 표준의 3가지 블록길이(648, 1296, 1944)와 4가지 부호율(1/2, 2/3, 3/4, 5/6)을 지원하는 다중모드 LDPC 복호기를 설계하였다. 하드웨어 복잡도를 고려하여 layered 복호방식의 블록-시리얼(부분병렬) 구조로 설계 되었으며, 최소합 알고리듬의 특징을 이용한 검사노드 메모리 최소화 방법을 고안하여 적용함으로써 기존방법에 비해 검사노드 메모리 용량을 47% 감소시켰다. Matlab 모델링과 시뮬레이션을 통해 고정소수점 비트 폭이 LDPC 복호기의 복호성능에 미치는 영향을 분석하고, 이를 통해 최적의 하드웨어 설계조건을 도출하여 반영하였다. 설계된 회로는 FPGA 구현을 통해 하드웨어 동작을 검증하였으며, 0.18-${\mu}m$ CMOS 셀 라이브러리로 합성한 결과 약 219,100 게이트와 45,036 비트의 메모리로 구현되었고, 50 MHz@2.5V로 동작하여 164~212 Mbps의 성능을 갖는 것으로 평가되었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권5호
• /
• pp.1421-1444
• /
• 2012

Mobile devices such as Android devices are emerging as a convenient client computing device with mobility and context-sensing capability. However, the computing power and hardware resource of the devices are limited due to their small form-factor. Consequently, large-scaled applications could not be deployed on these devices. Nonetheless, if the large-scaled applications are deployed and executed on the devices, high performance of the applications cannot be guaranteed. To remedy the limitation in terms of performance, it is inevitable to let some heavy-weight functionality executed on the server side and let a client application invoke the functionality in the server. To realize this kind of mobile applications, we adopt well-defined architecture design principles; being thin-client, being layered with Model-View-Controller (MVC), and being balanced between client side and server side. By adopting the principles, we propose a unique, ideal and practical architecture for mobile applications, called balanced MVC architecture. By considering the principles, key design considerations of realizing balanced MVC architecture lie in functionality partitioning. Hence, we define key criteria of determining the degree of performance. And, we define a method to design a balanced MVC architecture which embodies functionality partitioning for high performance, and a simulation-based evaluation method of balanced MVC architectures.

• 로봇학회논문지
• /
• 제5권3호
• /
• pp.240-250
• /
• 2010

A URC, which is a Ubiquitous Robot Companion, provides services to users in ubiquitous computing environments and has advantage of simplifying robot's hardware and software by distributing the complicated functionality of robots to other system. In this paper, we propose SOWL, which is a software architecture for URC robots and a mixed word of SOMAR and CAWL. SOWL keeps the advantages of URC and it also has the loosely-coupled characteristics. Moreover it makes it easy to develop of URC robot software. The proposed architecture is composed of 4 layers: device software, robot software, robot application, and end user layer. Developers of the each layer is able to build software suitable for their requirements by combining software modules in the lower layer. SOWL consists of SOMAR and CAWL engine. SOMAR, which is a middleware for the execution of device software and robot software, is based on service-oriented architecture(SOA) for robot software. CAWL engine is a system to process CAWL which is a context-aware workflow language. SOWL is able to provide a layered architecture for the execution of a robot software. It also makes it possible for developers of the each layer to build module-based robot software.

• 한국통신학회논문지
• /
• 제35권3C호
• /
• pp.287-294
• /
• 2010

본 논문은 대표적인 고속 UWB 시스템인 MB-OFDM UWB 시스템에서 데이터 전송율을 올리면서 복호 성능을 보장하기 위해서 제안하고 있는 LDPC 부호에 대한 연구 결과를 보인다. 하드웨어 효율적인 복호기의 구조를 제안하기 위해서 LLR(log likelihood ratio) 계산 알고리즘과 체크노드 갱신 알고리즘을 시뮬레이션 하여 효율적인 방법을 선택 하였고, LDPC 디코딩 알고리즘의 반복 횟수를 결정하였다. 그리고 본 논문은 LDPC 디코더의 UWB 응용에 필요한 요구사항을 만족시키기 위한 LDPC 복호기의 구조를 제시하였다. 이 구조는 FPGA를 통하여 합성되어 구현성을 검토하였으며, 기존 QC-LDPC 부호의 FPGA 합성 결과와 비교하여 높은 throughput을 제공함을 확인하였다. 이 구조를 이용하면 BP 알고리즘에 비해서 약 0.2dB의 성능열화를 포함하지만, 고속 데이터 전송에 적합한 LDPC 복호기를 구현할 수 있다.

• KIEAE Journal
• /
• 제7권5호
• /
• pp.53-58
• /
• 2007

In order to predict the indoor air pollutant, the VOCs emission rate is used through small chamber in the design process. However, the small chamber method has limitations as the convective mass transfer coefficient, the most important factor when predicting VOCs contamination of indoor air, is different between the small chamber result and the measured data in the actual building. Furthermore, the existing studies which analyzed mass transfer coefficient in the small chamber were directed on the small chambers developed at the time and FLEC(Field and Laboratory Emission Cell), thus, are different from the current small chamber which has been changed with improvements. The purpose of this study is to determine the emission rate of pollutant in multi-layered building materials, and predict the indoor pollutant concentration through the CFD(Computational of Fluid Dynamics) and CRIAQ2 based on the mass transfer coefficient on singled-layered building material by using the current small chamber widely used in Korea. Futhermore, this study used the new convective mass transfer coefficient(hm') which indicates the existing convective mass transfer coefficient(hm) including VOC partition coefficient(k). Also, formaldehyde was selected as target pollutant.

• 한국공간구조학회논문집
• /
• 제20권4호
• /
• pp.141-147
• /
• 2020

Single-layered grid space steel roof structure is an architectural system in which the structural ability of the nodal connection system greatly influences the stability of the entire structure. Many bolt connection systems have been suggested to enhance for better construct ability, but the structural behavior and maximum resistance of the connection system according to the size of bolt clearance play were difficult to identify. In particular, the identification of bending stiffness of the connection system is very important due to the characteristics of shell structures in which membrane stresses based on bending force effect significantly. To identify effective structural behavior and maximum bearing force, four representative nodal connection systems were selected and nonlinear numerical analysis were performed. The numerical analysis considering the size of the bolt clearance were performed to investigate structural behavior and maximum values of the bending force. In addition, the type of effective nodal connection system were evaluated. As a result, the connection system, which has two shear plane, represented high bending stiffness.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.247-255
• /
• 2024

Development of electronic warfare(EW) software has become increasingly challenging due to stricter regulations, shorter development cycles, and increased reliability testing. Consequently, software development often proceeds without proper architecture design, which can lead to missing critical quality requirements and potential system redesigns. In this study, we propose using Attribute-Driven Design(ADD) 3.0 to design software architecture specifically tailored for EW systems, enabling a more systematic approach to address quality requirements. The paper presents an overview of EW software and ADD 3.0 methodology, followed by an analysis of the architecture design results using static and dynamic views. The paper concludes by discussing the effectiveness of the proposed architecture design.

• Journal of Mechanical Science and Technology
• /
• 제15권5호
• /
• pp.544-554
• /
• 2001

A shop floor can be considered as an important level to develop Computer Integrated Manufacturing system (CIMs). However, a shop floor is a dynamic environment where unexpected events continuously occur, and impose changes to the planned activities. To deal with this problem, a shop floor should adopt an appropriate control system that is responsible for the coordination and control of the manufacturing physical flow and information flow. In this paper, a hybrid control system is described with a shop floor activity methodology called Multi-Layered Task Initiation Diagram (MTD). The architecture of the control model contains three levels: i.e., he shop floor controller (SFC), the intelligent agent controller (IAC) and the equipment controller (EC). The methodology behind the development of the control system is an intelligent multi-agent paradigm that enables the shop floor control system to be an independent, an autonomous, and distributed system, and to achieve an adaptability to change of the manufacturing environment.