• 제목/요약/키워드: Lateral growth

검색결과 559건 처리시간 0.403초

미숙화기와 액아에 의한 네오레게리아의 기내 번식 (In Vitro Propagation of Neoregeria carorinae cv. Tricolor from Immature Flowers and Lateral Buds)

  • 정향영;박봉규;유창재
    • 식물조직배양학회지
    • /
    • 제22권4호
    • /
    • pp.223-227
    • /
    • 1995
  • 네오게레리아의 대량번식을 위해 미숙화기와 액아를 배양하였으며, 배양에 적합한 재료 채취시기, 생장조절제 종류와 농도 및 배양방법이 부정아 형성 및 생장에 미치는 영향을 조사한 결과, 미숙화기는 화아분화 4주후에, 액아는 화아 분화 7주후에서 절취하여 배양하는 것이 부정아 형성률이 가장 높았다. 부정아 형성에 적합한 생장조절제 종류와 농도는 MS + BA 1 mg/L + BA 0.5 mg/L이었다. 고체배지가 액체배지보다 부정아 형성 및 생장에 더 효과적이었다. 발근에 적합한 생장조절제 종류와 농도는 NAA 1 mg/L이었다. 액체배지가 고체배지보다 신초의 발근 및 생장에 더 효과적이었다.

  • PDF

SLS 공정을 이용한 p-type poly-Si TFT 제작에 관한 연구 (A Study on the Fabrication of p-type poly-Si Thin Film Transistor (TFT) Using Sequential Lateral Solidification(SLS))

  • 이윤재;박정호;김동환
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제51권6호
    • /
    • pp.229-235
    • /
    • 2002
  • This paper presents the fabrication of polycrystalline thin film transistor(TFT) using sequential lateral solidification(SLS) of amorphous silicon. The fabricated SLS TFT showed high Performance suitable for active matrix liquid crystal display(AMLCD). The SLS process involves (1) a complete melting of selected area via irradiation through a patterned mask, and (2) a precisely controlled pulse translation of the sample with respect to the mask over a distance shorter than the super lateral growth(SLG) distance so that lateral growth extended over a number of iterative steps. The SLS experiment was performed with 550$\AA$ a-Si using 308nm XeCl laser having $2\mu\textrm{m}$ width. Irradiated laser energy density is 310mJ/$\textrm{cm}^2$ and pulse duration time was 25ns. The translation distance was 0.6$\mu$m/pulse, 0.8$\mu$m/pulse respectively. As a result, a directly solidified grain was obtained. Thin film transistors (TFTs) were fabricated on the poly-Si film made by SLS process. The characteristics of fabricated SLS p -type poly-Si TFT device with 2$\mu\textrm{m}$ channel width and 2$\mu\textrm{m}$ channel length showed the mobility of 115.5$\textrm{cm}^2$/V.s, the threshold voltage of -1.78V, subthreshold slope of 0.29V/dec, $I_{off}$ current of 7$\times$10$^{-l4}$A at $V_{DS}$ =-0.1V and $I_{on}$ / $I_{off}$ ratio of 2.4$\times$10$^{7}$ at $V_{DS}$ =-0.1V. As a result, SLS TFT showed superior characteristics to conventional poly-Si TFTs with identical geometry.y.y.y.

땅콩나물 생산에서 세근발생 억제 조건에 관한 연구 (A study on Suppression Condition of Lateral Root Development for Healthy Production of Peanut Sprouts)

  • 이규빈;박은지;허유;손병구;강점순
    • 생물환경조절학회지
    • /
    • 제25권3호
    • /
    • pp.177-183
    • /
    • 2016
  • 본 연구는 고품질 땅콩나물 생산을 위해서 세근발생을 억제시키는 생장조절제의 처리 효과를 검정하기 위해 수행되었다. 땅콩나물의 세근발생억제제인 참시루와 6BA를 '조평'과 '베트남'땅콩에 처리하면 세근발생억제제의 처리농도가 높을수록 세근 발생수는 감소하였다. 그 효과는 6BA가 참시루보다 우수하였고, '베트남' 땅콩보다는 '조평'에서 세근발생억제 효과가 명확하였다. 참시루 및 6BA의 배양용액을 1일간 간격으로 교체하면 배양용액을 교체하지 않는 처리구에 비해 부패균 활동을 억제시켜 하배축 생장을 촉진시킨 반면 세근발생은 억제시켜 고품질 땅콩나물 생산이 가능하였다. 땅콩나물 재배의 배양용액에 $GA_3$와 참시루를 혼용하여 처리하면 땅콩나물의 생육을 향상시켰고, 적정 처리조건은 $GA_3\;50mg{\cdot}L^{-1}$ + Chamsiru $8.40mg{\cdot}L^{-1}$ 처리였다.

수평 구조 Zinc Oxide Nanorods 기반 센서의 전극 금속별 특성 비교

  • 이재혁;김선민;이수민;김성현;김태근;조진우
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.377-377
    • /
    • 2012
  • 반도체 물질로서 Zinc oxide (ZnO) nanorod (NR)는 Hydrothermal growth method로 제작 시 고가의 장비가 필요치 않기에 저비용 대면적 박막을 제작하는데 적합하지만 NR들의 array 조절과 각각의 rod와 전극 간의 연결에서 어려움을 가지고 있다. 최근 연구에서는 이러한 NR array 형상 조절과 소자의 성능 향상을 위하여 tilted sputtering method를 이용해 seed layer를 lateral 하게 형성하여 성장시켜 표면적을 극대화함으로서 응용되는 센서의 성능을 향상시키는 연구가 진행되고 있다. 본 연구에서는 이렇게 향상된 수평구조의 ZnO NR과 다양한 전극 금속 간의 schottky barrier의 높이 차이에 따라 sensitivity와 response time의 차이를 측정하였다. NR들을 전계방출형 전자현미경과 XRD로 분석 NR의 lateral structure 및 결정성을 확인하였다. 그리고 이렇게 형성한 NR을 소자화하여 Au, Ag, Al을 전극 금속물질로 사용한 경우에 대하여 sensing performance와 전극 금속의 schottky barrier의 상관관계를 확인하였다.

  • PDF

융제법에 의한 Mn-Zn Ferrite 단결정성장에 관한 연구 (Crystal Growth of Mn-Zn Ferrite form High-Temperature Solutions)

  • 이성국;오근호;강원호
    • 한국세라믹학회지
    • /
    • 제24권5호
    • /
    • pp.461-469
    • /
    • 1987
  • Single crystals of Mn-Zn Ferrite were grown by slow cooling method using Na2B4O7 as flux agent. The effects of flux content and cooling rate on the types of crystals, and the relation between supersaturation and growth mechanism were studied. As a result, the types of grown crystals occurred as plate, hopper and octahedral crystals. The occurrence of these crystal types was dependent on flux content. The habit was found to correlate with the growth rate and supersaturation. The lateral growth of a dendritic crystal is related to the twin layer. The growth of crystals from borax melts mainly occurred by the layer-spreading growth following corner and edge nucleation caused by high supersaturation in the melt. Especially, the plate crystals were produced on top of the melts. The hopper and octahedral crystals occurred at lower supersaturation than the plate crystals.

  • PDF

매립지반 지하공동구의 수평이동원인에 대한 수치해석적 분석 (Numerical Analysis of Utility Tunnel Movement under Reclamation Ground)

  • 윤우현;황철성
    • 한국안전학회지
    • /
    • 제28권5호
    • /
    • pp.35-40
    • /
    • 2013
  • Recently reclamation land is largely developed to utilize the land according to economic growth. The soil of landfill is soft, low shear strength, which makes it difficult to use the equipment. A large movement is occurred on the utility tunnel under construction. The inclined land with high water level and underground facilities are widely distributed and the excess pore water pressure may occur under construction similarly to this study. Some different conditions are made to design result, such as 4m of soil piling near the construction area, heavy rainfall during 2nd excavation that may cause flow liquefaction. To analyze the cause of transverse lateral movement, Three dimensional analysis are performed to four load cases, which is original design condition, flow liquefaction by heavy rainfall, unsymmetric lateral soil pressure, and both of them simultaneously. Ten steps of full construction stage, 1st excavation for utility tunnel, construction of utility tunnel, 1st refill, piling soil from 1m to 4 m, 2nd excavation for drainage culvert, liquefaction around the utility tunnel, construction of drainage culvert and 2nd refill, are take into account to investigate the cause of movement.

A comparative study of early leaf development in the Viola albida complex

  • CHOI, Yong Kuk;WHANG, Sung Soo
    • 식물분류학회지
    • /
    • 제49권1호
    • /
    • pp.1-7
    • /
    • 2019
  • Early leaves within the Viola albida complex were investigated by scanning electron microscopy in order to determine the morphological segments during morphogenesis. The early leaf development of V. albida var. albida could be morphologically divided into the eight stages in the following order: I, the initiation of shoot germination; II, the conical growth directionally of the leaf; III, the adaxial and abaxial formation of the leaf; IV, the initiation of the stipule; V, the formation of a transitional zone between the leaf blade and petiole; VI, the expansion of the upper part of the leaf blade; VII, the formation of almost all parts of the early leaf; VIII, the early simple leaf. Viola albida var. takahashii differs from V. albida var. albida by additional stages, i.e., V-1, the initiation of the first lateral lobe at the both lateral parts of the leaf after the stage V and an early lobed leaf. Viola albida var. chaerophylloides is also distinguished from two taxa by two developmental features, V-2, the initiation of a second lateral lobe below of the first lateral lobe, and an early palmately compound leaf. These findings suggest that the Viola albida complex would be in the process of peramorphosis, showing developmental changes in a chain of events, leading to a different leaf shape. These data would also be useful for isolating genes that give rise to different leaf morphogenesis outcomes among the taxa in the Viola albida complex.

전두동의 크기와 하악골 성장예측에 관한 연구 (A STUDY ON THE MANDIBULAR GROWTH PREDICTION AND SIZE OF THE FRONTAL SINUS)

  • 경승현;유영규
    • 대한치과교정학회지
    • /
    • 제27권3호
    • /
    • pp.473-479
    • /
    • 1997
  • 성장기 환자의 치료 계획 수립시 치아 이동만으로 치료를 할 것인지, 악 정형 치료를 동반할 것인지, 아니면 성장후 수술을 할 것인지를 결정하는 일은 쉬운 일이 아니며 특히, 악골의 성장을 예측하는 과정을 치료계획 수립에 매우 중요한 부분이다. 전두동은 조기에 성장이 완료되고 하악골은 20세까지 성장을 지속한다는 점에 착안하여, 측모 두부방사선 사진상에 나타나는 전두동의 크기와 하악골 크기간에 상관성을 알아보기 위해 228명을 골격선 제I급, 제II급, 제III급 부정교합의 3군으로 분류하고 하악골의 장경과 악골의 전후방 관계를 나타내는 3가지 지수(ANB, APDI, Wits)를 측정하여, 서로간의 상관성을 검토한 결과 다음의 결론을 얻었다. 1. 전두동의 크기와 ANB(-0.3633), APDI(0.296), Wits(-0.2380), 하악골 장경(0.2704)은 높은 상관성을 (p<0.001) 보였다. 2. 골격성 제III급 부정교합군에서, 측모두부 방사선 사진상에 나타나는 전두동의 크기가 골격성 제 I 급 부정교합군이나 II 급 부정교합군보다 크게 나타났다.

  • PDF

재배통의 흔들음 정도에 따른 콩나물의 생장과 형태 변화 (Changes in Growth and Morphological Characteristics of Soybean Sprouts in Response to Agitation of Culture Box)

  • 홍동오;이창우;김홍영;김희규;강진호
    • 한국자원식물학회지
    • /
    • 제19권2호
    • /
    • pp.199-203
    • /
    • 2006
  • 콩나물의 상품성은 형태에 따라 크게 변한다. 본 연구는 상면살수 방식에서 재배통의 흔들음 정도가 콩나물의 생장과 형태에 미치는 영향을 조사하고자 재배 초기 3일간의 흔들음 횟수(0, 3, 5회/일)와 기간(5회/일로 1, 2, 3일)을 달리하여 시험을 수행하였던 바 그 결과를 요약하면 다음과 같다. 1. 개체당 형성된 세근수는 흔들음 횟수와 기간이 증가할수록 적어지는 경향을 보였다. 2. 콩나물 전체길이는 흔들음 횟수와 기간간에 차이가 없었다. 그러나 흔들음 횟수와 기간이 많고 길수록 하배축은 짧아졌던 반면, 뿌리는 길어지는 것으로 조사되었다. 3. 자엽 바로 아래의 hook 직경은 흔들음 횟수가 증가할수록 커졌으나, 하배축 중간부분의 직경은 흔들음 횟수와 기간간에 차이가 없는 것으로 나타났다. 4. 개체당 각부위 및 전체 생체중과 건물중은 흔들음 횟수와 기간간에 차이가 없었다. 따라서 상면살수 방식에서 재배통의 흔들음은 콩나물의 생장보다는 형태에 주로 영향을 미치는 것으로 나타났다.

몇몇 허브식물의 생육에 미치는 B-9과 Uniconazole 처리효과 (Effect of B-9 and Uniconazole on the Growth of Mentha piperita, Origanum vulgare L., and Thymus vulgaris L.)

  • 이정화;문윤자;박기배;허무룡;박중춘
    • 원예과학기술지
    • /
    • 제17권2호
    • /
    • pp.131-133
    • /
    • 1999
  • 식물생장억제제 처리시 대조구에 비하여 초장이 짧아지는 것으로 나타났으며 uniconazole 처리가 B-9 처리보다 초장억제에 더욱 효과적이었으나 Thymus vulgaris 2,500mg/L B-9 처리시는 uniconazole 처리보다 초장이 짧은 결과를 보였다. 5,000mg/L B-9처리시 공시한 3종 모두의 삽수가 고사하였다. 신초수는 대조구에서 가장 많이 발생하였으며 B-9 처리시는 uniconazole 처리에 비하여 신초발생이 많았다. 잎에 대한 생장억제제의 처리 효과는 공시식물 모두 유의차가 적었으며 절간장은 초장과 같은 결과를 나타내었다. Mentha piperita, Origanum vulgare와 Thymus vulgaris 지하부 생육은 B-9이나 uniconazole에 의해 현저하게 영향 받지 않았다.

  • PDF