• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.297-297
• /
• 2010

Transparent conductive Oxide (TCO) is an essential material in the various optoelectronic applications as a transparent electrode, such as solar cells, flat panel displays and organic light emitting diodes. Currently, Indium tin oxide (ITO) is commonly used in industry due to its low electrical resistivity, high transmittance and high adhesion to substrate. However, ITO is expensive and should be prepared at high temperature, which makes it hard to use ITO in flexible devices. In this regard, Ga-doped ZnO is expected as an ideal candidate for replacing ITO.

• 대한전자공학회논문지TE
• /
• 제37권1호
• /
• pp.27-34
• /
• 2000

본 논문에서는 SCH 양자우물 구조를 가진 레이저 다이오드에서의 캐리어 수송기구와 변조응답 특성에 대해 고찰하였다. 캐리어 수송구조 고찰을 위해 캐리어 밀도분포및 다이오드전류를 계산하였다. 또한 우물내에서의 캐리어 재결합율을 SCH길이의 함수로 도출하였다. 변조응답 특성에서는 캐리어와 광자에 대한 3쌍의 비율 방정식을 도출, 해석하여 SCH 길이에 따른 변조 대역폭과 완화 진동 주파수, 감쇄 비율과 K-factor의 특성에 대하여 고찰하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1359-1360
• /
• 2006

lTO(Indium-Tin-Oxide) was used as anode material for OLED. Characteristics of ITO have great effect on efficiency of OLEDS(Organic light emitting diodes). ITO surface was treated by Nd:YAG laser in order to improve its chemical properties, wettability, adhesive property and to remove the surface contaminants while maintaining its original function. In this study, main purpose was to improve the efficiency of OLEDs by the ITO surface treatment: ITO surface was treated using a Nd:YAG(${\lambda}=266nm$, pulse) with a fixed power of 0.06[w] and various stage scanning velocities. Surface morphology of the ITO was investigated by AFM. Test OLEDs with surface treated ITO were fabricated by deposition of TPD (HTL), Ald3 (ETL/TML) and Al (cathode) thin films. Device performance of the OLEDs such as V-I-L was investigated using Source Measurement Unit (SMU: Keithly. Model 2400) and Luminance Measurement (TOPCON. BM-8).

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1381-1387
• /
• 2018

One dimensional (1D) grating has been fabricated (using focused ion beam) on 50 nm gold (Au) film deposited on higher refractive index Gallium phosphate (GaP) substrate. The sub-wavelength periodic metal nano structuring enable to couple photon to couple with the surface plasmons (SPs) excited by them. These grating devices provide the efficient control on the SPs which propagate on the interface of noble metal and dielectric whose frequency is dependent on the bulk electron plasma frequency of the metal. For a fixed periodicity (${\Lambda}=700 nm$) and slit width (w = 100 nm) in the grating device, the efficiency of SPP excitation is about 40% compared to the transmission in the near-field. Efficient coupling of SPs with photon in dielectric provide field localisation on sub-wavelength scale which is needed in Heat Assisted Magnetic recording (HAMR) systems. The GaP is also used to emulate Vertical Cavity Surface emitting laser (VCSEL) in order to provide cheaper alternative of light source being used in HAMR technology. In order to understand the underlying physics, far-and near-field results has been compared with the modelling results which are obtained using COMSOL RF module. Apart from this, grating devices of smaller periodicity (${\Lambda}=280nm$) and slit width (w = 22 nm) has been fabricated on GaP substrate which is photoluminescence material to observe amplified spontaneous emission of the SPs at wavelength of 805 nm when the grating device was excited with 532 nm laser light. This observation is unique and can have direct application in light emitting diodes (LEDs).

• 한국재료학회지
• /
• 제33권6호
• /
• pp.229-235
• /
• 2023

An all-perovskite oxide heterostructure composed of SrSnO₃/Nb-doped SrTiO₃ was fabricated using the pulsed laser deposition method. In-plane and out-of-plane structural characterization of the fabricated films were analyzed by x-ray diffraction with θ-2θ scans and φ scans. X-ray photoelectron spectroscopy measurement was performed to check the film's composition. The electrical transport characteristic of the heterostructure was determined by applying a pulsed dc bias across the interface. Unusual transport properties of the interface between the SrSnO₃ and Nb-doped SrTiO₃ were investigated at temperatures from 100 to 300 K. A diodelike rectifying behavior was observed in the temperature-dependent current-voltage (IV) measurements. The forward current showed the typical IV characteristics of p-n junctions or Schottky diodes, and were perfectly fitted using the thermionic emission model. Two regions with different transport mechanism were detected, and the boundary curve was expressed by ln I = -1.28V - 13. Under reverse bias, however, the temperature- dependent IV curves revealed an unusual increase in the reverse-bias current with decreasing temperature, indicating tunneling effects at the interface. The Poole-Frenkel emission was used to explain this electrical transport mechanism under the reverse voltages.

• 전자공학회논문지D
• /
• 제36D2호
• /
• pp.81-89
• /
• 1999

다양한 파장변화 기술중에서 레이져 다이오드의 발전상태에서 교차이득변도(Cross-Gain Modulation)을 이용한 파장변환은 고속의 신호를 매우 간단하고 효율적으로 처리할 수 있다. 본 논문에서는 SSGDBR (Superstructure Grating Distributed Bragg Reflector) 레이저 다이오드의 파장변환기로서 특성을 분석하고 광통신 네트웍 모델링을 위한 CAD 도구로서 개선된 시영역 대신호 동적모델(Time-Domain Large-Signal Dynamic Model)의 유용성을 제시하였다. 이 모델을 l용하여 이런 구조의 파장변환 소자는 10Gbps이상 고속데이터를 처리할 수 있고 광대역 파장변환이 가능하다는 것을 확인하였다. 입력 광신호의 세기와 주입되는 전류가 파장변환된 신호의 소광비 등에 미치는 영향 및 Eye Diagram 등을 살펴 보았으며, 기존에 발표된 실험결과들과 매우 유사한 경향을 보임을 관측하였다.

• 한국광학회지
• /
• 제15권2호
• /
• pp.171-176
• /
• 2004

광 편향기가 집적된 레이저 다이오드를 제작하고 편향기 주입전류에 따른 레이저 다이오드의 특성 변화 및 출력광의 편향을 조사하였다. 레이저 다이오드와 집적된 수동 도파로의 상부 클래드 층의 일부분에 광 편향기를 집적하고, 편향기의 전류 주입에 따른 굴절률 변화를 유도하여 출력광의 편향이 발생하도록 하였다. 편향기의 전류 주입에 따른 출력광의 특성변화를 조사하기 위하여 편향기 주입 전류에 따른 레이저 다이오드의 문턱 전류(threshold current), 발진 효율(slope efficiency) 및 출력광 스펙트럼을 측정하였다. 측정 결과, 편향기 전류의 증가에 따라 출력광의 문턱 전류는 증가하고, 발진 효율은 감소하는 경향을 나타내었으나 출력광의 스펙트럼에는 영향을 주지 않는 특성을 나타내었다. 또한, 이론적 계산을 통해 광 편향기를 지나는 광이 편향됨을 확인하고, 편향기 집적 레이저 다이오드에서 출력되는 광의 far-field pattern을 측정하여 편향기 주입 전류에 따른 출력광의 편향을 실험적으로 확인하였다. 제작된 광 편향기 집적 레이저 다이오드에서 15 ㎃의 광 편향기 주입 전류 변화에 대해서 1.9$^{\circ}$의 편향각 변화를 측정 할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.105-105
• /
• 2011

ZnO is a promising material since it could be applied to many fields such as solar cells, laser diodes, thin films transistors and gas sensors. ZnO has a wide and direct band gap for about 3.37 eV at room temperature and a high exciton binding energy of 60 meV. In particular, ZnO features high sensitivity to toxic and combustible gas such as CO, NOX, so on. The development of gas sensors to monitor the toxic and combustible gases is imperative due to the concerns for enviromental pollution and the safety requirements for the industry. In this study, we investigated the effect of substrate temperature and post-annealing on structural and electrical properties of ZnO thin films. ZnO thin films were deposited by pulsed laser deposition (PLD) at various temperatures at from room temperature to $600^{\circ}C$. After that, post-annealing were performed at $600^{\circ}C$. To inspect the structural properties of the deposited ZnO thin films, X-ray diffraction (XRD) was carried out. For gas sensors, the morphology of the films is dominant factor since it is deeply related with the film surface area. Therefore, the atomic force microscopy (AFM) and field emission scanning electron microscopy (FE-SEM) were used to observe the surface of the ZnO thin films. Furthermore, we analyzed the electrical properties by using a Hall measurement system.

• 대한화장품학회지
• /
• 제48권3호
• /
• pp.245-254
• /
• 2022

본 연구에서는 655 nm에서 저출력 레이저와 625 ± 5 nm와 850 ± 10 nm에서 파장을 방출하는 LED를 이용한 복합 광선 요법이 탈모 및 두피에 나타나는 효능을 조사하고자 하였다. 이번 연구에는 총 33 명의 시험대상자가 등록되었다. 각 시험대상자는 Low-level laser therapy (LLLT)와 light-emitting diode (LED) 기기를 매일 10 min 씩 12 주간 두피와 모발에 사용했다. LLLT와 LED 기기를 사용한 지 12 주 후, 두피의 붉은기, 탄력, 수분 함량에서 상당한 개선이 있었으며, 모발의 윤기와 인장 강도, 탈락 모발 수가 개선되었다. 시험대상자가 시험 기기를 사용하는 기간 동안 특별한 피부 이상반응에 대한 보고는 없었다. LLLT와 LED를 이용한 복합 광선 요법은 탈모와 두피 상태 개선에 효과적인 요법임이 입증되었다.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.130-135
• /
• 1999

The main scale of linear encoder greatly effects on the precision of displacement measurement. Especially when needing the long range measurement the length of main scale should be increased accordingly. In this paper we propose a linear encoder that uses laser interference pattern as main scale for long range measurement. The linear encoder is similar to Michelson interferometer excepting that the reference mirror is tilted so as to obtain interference fringe pattern and a grating panel is attached on a quadratic photo diodes. Four kinds of grating having phase difference of 0. $\pi$/4, $\pi$/2, 3$\pi$/4 are arranged on the panel. The experimental results show that signals of quadratic photo diode A, B, {{{{ {-}atop {A } }}}} and {{{{ {- } atop {B } }}}} are cosine wavelike and successive signals have phase difference of $\pi$/4 each other. So the proposed method can achieve improved measurement resolution.