• 품질경영학회지
• /
• 제31권4호
• /
• pp.150-163
• /
• 2003

The purpose of this paper is to propose an interactive method using the concept of Signal­to­Noise (SN) ratios and cutting ranges for selecting the most preferred alternatives of Multiple­attribute Decision­Making(MADM) with the­smaller­the­better or the­larger­the­better characteristics. In this method the decision makers could make a grouping of attributes by their priorities. This research is based on the assumption of an equality between the attributes of MADM with the characteristics of Taguchi method. As a result, this interactive method could transform the characteristic value of Taguchi method into the size of SN ratios which are relatively easy to understand by decision makers.

• 산업경영시스템학회지
• /
• 제40권2호
• /
• pp.129-136
• /
• 2017

Among the information technology and automation that have rapidly developed in the manufacturing industries recently, tens of thousands of quality variables are estimated and categorized in database every day. The former existing statistical methods, or variable selection and interpretation by experts, place limits on proper judgment. Accordingly, various data mining methods, including decision tree analysis, have been developed in recent years. Cart and C5.0 are representative algorithms for decision tree analysis, but these algorithms have limits in defining the tolerance of continuous explanatory variables. Also, target variables are restricted by the information that indicates only the quality of the products like the rate of defective products. Therefore it is essential to develop an algorithm that improves upon Cart and C5.0 and allows access to new quality information such as loss cost. In this study, a new algorithm was developed not only to find the major variables which minimize the target variable, loss cost, but also to overcome the limits of Cart and C5.0. The new algorithm is one that defines tolerance of variables systematically by adopting 3 categories of the continuous explanatory variables. The characteristics of larger-the-better was presumed in the environment of programming R to compare the performance among the new algorithm and existing ones, and 10 simulations were performed with 1,000 data sets for each variable. The performance of the new algorithm was verified through a mean test of loss cost. As a result of the verification show, the new algorithm found that the tolerance of continuous explanatory variables lowered loss cost more than existing ones in the larger is better characteristics. In a conclusion, the new algorithm could be used to find the tolerance of continuous explanatory variables to minimize the loss in the process taking into account the loss cost of the products.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 춘계학술대회
• /
• pp.1-5
• /
• 2003

We purpose a decision model to select the optimal facilities for the Decision Making problems with multiple characteristics(nominal-is-best characteristics, larger-is -better characteristics, smaller- is -better characteristics). Using this model, concept of the loss function is used in this comprehensive method of for select the optimal preferred facilities. To solve the issue on the optimal preferred facilities for multiple characteristics, this study propose the loss function with cross-product terms among the characteristics and derived range of the coefficients of the terms.

• 산업경영시스템학회지
• /
• 제26권4호
• /
• pp.72-81
• /
• 2003

The purpose of this paper is to propose an interactive method, which is designed to select the optimal preferred alter-native for the MLDM(Multiple-the Larger-the better type Decision-Making) problems with the-larger-the-better quality characteristics. The basic idea of the paper is essentially to eliminate inefficient alternative based on the concept of Taguchi Signal-to-Noise ratios and the cutting range instead of using UVF(Utility/value Function) on the group of attributes that can be considered importantly by the decision makers. As a result, the method proposed in the paper for MLDM problems can be significant in that the change of characteristics is transformed into the size of Signal-to-Noise ratio, which can be relatively easy to understand by decision makers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1744-1746
• /
• 1999

In this paper, we give pressure stimulation into organic ultra thin films and detected the induced displacement current properties, and then manufacture a device under the accumulation condition. In processing of a device manufacture, we can see the process is good from the change of a surface pressure and transfer ratio of area per molecule of organic ultra thin films. The structure of manufactured device is MIM(Au/polyimide LB films/AU), the number of accumulated 19 layers. I-V characteristic of the device is measured from -5[V] to +5[V]. The maximum value of measured current is increased as the number of accumulated layers are decreased. The insulation of a thin film is better as the interval between electrodes is larger, and the insulation properties of a thin film is better as the distance between electrodes is larger.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권4호
• /
• pp.101-107
• /
• 1996

This test was performed on the hydraulic automatic gauge control(AGC) system of adaptive mass flow method. Fundamental purpose of this study are performance evaluation of this AGC system under the actual rolling condition. It was concluded that the response of AGC system depends on the dynamic characteristics of a reel motor or roll position. The test results are as follows : 1) The control method of reel motor current is better than than of the roll position as AGC system. 2) The more steel strip thickness of delivery side is thick, the larger the gauge deviation is large, and the more it is thin, the larger the gauge deviation rate is large. 3) Because the gauge deviation is large at acceleration and deceleration speed than steady speed, so AGC system is better to adopt over 50m/min. By applying this AGC system, not only the accurary in strip thickness were improved but also productivity was improved dramatically.

• 대한조선학회지
• /
• 제17권2호
• /
• pp.33-42
• /
• 1980

This paper compared the seakeeping quality of U, V type ships in infinite depth by using the finite element method. From the calculated results, it is found that heaving and pitching motions of V type are comparatively better than those of U type ship in the water of infinite depth and the reversed phenomenon occures in the water of finite depth. And the seakeeping quality of U type is better than V type ship in larger ranges than the nondimensional wave number 2.0.

• 한국약용작물학회지
• /
• 제26권5호
• /
• pp.354-361
• /
• 2018

Background: This study was conducted to investigate the growth characteristics, root yield and curcuminoid content of turmeric (Curcuma longa L.), cultivated using mother seed rhizomes (MR) and finger seed rhizome (FR) of different sizes. MR are attached to the stem, and FR are connected to the MR, and are used as a general seed rhizome. Methods and Results: Seed rhizomes of different types and sizes were used: large, medium and small for FR, and large, half-sized, and small for MR. These were assigned to the experimental groups and cultivated under greenhouse conditions. The growth characteristics, root yield, and curcuminoid content did not show clear difference between MR and FR, but suggest that the larger seed rhizomes (above 30 g) could have higher root yields. On average, harvested mother rhizomes (HMR) contained more curcuminoid than harvested finger rhizomes (HFR), while the yield of HFR was higher than that of HMR. The higher weight of harvested roots correlated significantly with elevated curcuminoid content. Conclusions: The two seed rhizomes, MR and FR, did not differ in root yield and curcuminoid contents, but larger seed rhizomes may produce better root yields. This suggest that the optimum seed rhizome is larger FR, to produce higher yields and quality in turmeric root production.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.541-545
• /
• 1996

In this paper, The performance and functions of automatic flatness control system installed on the 4 hi-reversing mill and has been investigated under actualconditions. A new automatic flatness control system incorporates a measuring roll for measurement and correction calculations, hydraulic roll benders, selective roll cooling, and a programmable controller for interface and data logging. The test results are as following. The more the exit steel strip thickness is thick, the smaller the I value, and the more it is thin, the larger the I value. And, a complex distribution of strip tension was controlled, for example, not only a quarter buckle but also a simple center wave and edge wave. Because the tension deviation is larger at acceleration speed and deceleration speed than steady speed, so automatic flatness control system of contact type is better to adopt over 450 m/min, automatic flatness control system reduces rapidly large flatness deviation. The maximum I value of strip has been decreased to 13 I, and defects caused by poor flatness have been drastically decreased. And coolant temperature for work roll cooling system on the automatic flatness control system is better to adopt about 50-55 .deg. C.

• 전자공학회논문지D
• /
• 제34D권6호
• /
• pp.43-49
• /
• 1997

Tungsten poycide has studied gate oxide reliability and dielectric strength charactristics as the composition of gate electrode which applied submicron on CMOS and MOS device for optimizing gate electrode resistivity. The gate oxide reliability has been tested using the TDDB(time dependent dielectric breakdwon) and SCTDDB (stepped current TDDB) and corelation between polysilicon and WSi$_{2}$ layer. iN the case of high intrinsic reliability and good breakdown chracteristics on polysilicon, confirmed that tungsten polycide layer is a better reliabilify properities than polysilicon layer. Also, hole trap is detected on the polysilicon structure meanwhile electron trap is detected on polycide structure. In the case of electron trap, the WSi$_{2}$ layer is larger interface trap genration than polysilicon on large POCL$_{3}$ doping time and high POCL$_{3}$ doping temperature condition. WSi$_{2}$ layer's leakage current is less than 1 order and dielectric strength is a larger than 2MV/cm.