• 보건교육건강증진학회지
• /
• 제20권1호
• /
• pp.19-39
• /
• 2003

Purpose: Although there is a lot of secondary data available for comparing community health status and planning health policies in terms of large area such as metropolitan cities or provinces, there is restricted data for establishing community health policies of the small areas such as towns, Gun(i.e., districts), and Gu. Specifically, the problems of producing a valuable index for health promotion in small areas are three fold: First, there is not an appropriate index model for measuring a small community health status. Second, a large part of secondary data in the small areas has been produced in an irregular time interval. In addition, all valuable data can not be integrated without time consuming work. Thus this study tries to establish a health promotion index model for assisting community health promotion initiatives of local governments. Methods and materials: Literature review, community health specialist consultation and a questionnaire survey was performed. Results: Based on Dever's model, a prototype of health promotion indicators was proposed and modified by the community health specialists. 15 classification scheme of statistical yearbook reorganized into the six areas. Those six areas were comprised in 24 indicator class with 96 specific indicators. Through further modification processes by a questionnaire survey, we developed a health promotion indicator model that contains six areas with 23 indicator class encompassed by 87 specific indicators. Conclusions: This study proposed a model of health promotion indicator comprised in the six areas with 23 indicator classes for measuring small area health promotion status. However, more specific or additional data in human biology, environment, and socioeconomic data is essential for producing a stronger model for health promotion measurement.

• 한국수자원학회논문집
• /
• 제43권12호
• /
• pp.1039-1050
• /
• 2010

본 연구에서는 괴산댐 하류 달천에서 6가지 직접 유량 측정 방법-유속면적법, 봉부자법, ADCP이동측정법, ADCP정지 측정법, 전자파표면유속계, LSPIV-을 적용하고, 이를 댐 방류량 및 유속면적법과 비교함으로써 정확도를 상호 평가하였다. 이를 위해 2005년부터 2010년까지 실시된 총 39회의 유량측정결과가 분석되었다. 댐 방류량과의 비교 결과, 봉부자법을 제외한 나머지5가지 방법은 평균 6.2% 이내의 절대값오차를 나타냈다. 유속면적법과 다른 4가지방법을 비교할 경우, 전자파표면유속계는 7.35%, 나머지 3가지 방법은 6% 이내의 절대값오차를 나타냈다. 봉부자법은 댐 방류량 및 유속면적법과 비교하여도 오차의 범위가 크게 나타났는데, 이에 대해서는 추가적인 검증이 필요하다.

• 한국ITS학회 논문지
• /
• 제11권3호
• /
• pp.63-69
• /
• 2012

넓은 지역에서의 종합감시시스템 구축은 인력을 효율적으로 관리할 수 있으며 자동화된 감시망을 구축하여 비감시 지역을 줄일 수 있는 특징이 있다. 본 논문에서는 넓은 지역에서 적용할 수 있는 지능형 종합감시시스템에서 입력되는 비디오의 특징을 위치와 용도별로 분석하여 적합한 비디오 감시 알고리즘을 선택할 수 있는 방안을 제시하였다. 7가지 대표적인 상황으로서 침입, 물건 버림/없어짐, 배회, 혼잡도 측정 등이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.285-292
• /
• 1999

Recent development cases of transportation utilities using tunnelling method in metropolitan sites have been increased due to the heavily complex environments and restrictions of construction works. The progress of tunnel design and construction to be supported by the tunnel analysis and measurement techniques using computers have increased adoptions of large section tunnels. In this paper, many factors to be considered in designing large section tunnels are discussed and the case of the construction of the subway station tunnel which is recently completed is introduced. This tunnel has a width of 24 m, a height of 16 m, and a excavation section area of 366 ㎡.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.9-15
• /
• 2019

This study focused on the application of ELID mirror-surface grinding technology to the manufacture of off-axis asymmetric large-area reflecting mirrors made of BK7 glass. The size of the parts, such as asymmetric large-area mirrors or lens, made form-accuracy or roughness especially hard to measure after machining because of the measuring range limit of measurement devices. In this study, the ELID grinding system has been set up for mirror-surface machining experiments manufacturing off-axis asymmetric lenses. A measuring method using a reference workpiece has been suggested to measure the form-accuracy and roughness. According to the experimental results, even when using only a reference workpiece, it is confirmed that the surface roughness was 8 nmRa and form-accuracy was 80 nmRMS, with a best fit asymmetric radius when using a grinding wheel of #8,000. It is found that the accuracy of large-area parts could be estimated by the proposed process.

• Journal of the Korean Data and Information Science Society
• /
• 제28권3호
• /
• pp.709-720
• /
• 2017

In healthcare and medical research, many important variables have a measurement error such as body mass index and laboratory data. It is also not easy to collect samples of large size because of high cost and long time required to collect the target patient satisfied with inclusion and exclusion criteria. Beside, the demand for solving a complex scientific problem has highly increased so that a semiparametric regression approach could be of substantial value solving this problem. To address the issues of measurement error, small domain and a scientific complexity, we conduct a multivariable Bayesian smoothing under structural measurement error covariate in this article. Specifically we enhance our previous model by incorporating other useful auxiliary covariates free of measurement error. For the regression spline, we use a radial basis functions with fixed knots for the measurement error covariate. We organize a fully Bayesian approach to fit the model and estimate parameters using Markov chain Monte Carlo. Simulation results represent that the method performs well. We illustrate the results using a national survey data for application.

• 한국전산구조공학회논문집
• /
• 제36권1호
• /
• pp.49-56
• /
• 2023

기술의 발전에 따라 전 세계적으로 교량은 대형화되고 있으며, 또한 노후 교량의 수도 급격히 증가하고 있다. 이들 대형, 노후 교량에 대한 구조건전성 모니터링은 대형 사고 예방을 위해 필수적이다. 본 연구에서는 LoRa LPWAN 기반 무선계측시스템의 적용에 대한 연구를 수행하였으며, 전남 신안군에 위치한 천사대교의 사장교 구간에 LoRa 무선계측시스템을 구축하였다. 교량의 주탑, 케이블, 보강거더에 대하여 계측시스템을 구축하여 기구축되어 운영 중인 유선기반 모니터링 시스템과 성능 및 경제성을 비교하여 LoRa LPWAN 기반 무선 모니터링 시스템의 대형 교량에서의 적용성을 검토하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.213-219
• /
• 2001

In this paper, particle velocity of slurry flow, a kind of solid-particle two phase flow, was measured by using a particle tracking velocimetry. Particles are modeled by sphere-shaped glass whose diameters are 3mm, 5mm, and 7mm At first, a particle which is falling in the water is captured and analyzed to give their free falling velocity. The falling velocity was very high up to about 4m/sec in the air, which needs special algorithm for the accurate measurement. For the upwelling slurry flow in the straight duct, there are some noises caused by cavity. However, the effect was so small that it does not affect the measurement of large particles. From the preliminary study of applying the PTV to measurement of particle movement in slurry flow, we could find out the optimum value of parameters: threshold value., searching area radius and correlation area size.

• 환경위생공학
• /
• 제11권3호
• /
• pp.53-61
• /
• 1996

The subject of this study was to analyse overviews of companies which exceed TLV by industry, hazardous factors, and to estimate the numbers of companies measured in 1993 and the implementation rate of working environment measurement by the act of industrial safety and health The result of this study was as follow. 1. The number of cases which exceed TLV was 5,937 companies. In distribution of excess companies by the scale of workers, small scale cases under the 49 workers were 3,150 companies(53.0%) of total cases, medium scale cases between 50 - 299 workers were 2,248 companies(37.9%), and large scale cases over 300 workers were 539 companies(9.1%). By the industry of excess companies, it was marked high rate in manufacture of fabricared metal products(except machinary and equipment), manufacture of textiles of each 1,048 companies(17.7%), and 1,018 companies(17.1%). By the area of excess companies, it was shown high rate in Kyeongki area marked 1,679 companies(28.3%) and Daegu-Kyeongbuk area were marked 1,417 companies (23.9%). By the hazardous factors of excess companies, noise was recorded high rate in 5,160 companies (86.9%), dust was shown in 1,245 companies(21.0%), organic solvent was marked 130 companies(7.9%). The number of excess factors by the company was 1.2. In this result, the more it was bigger scale companies, the more excess factors were much more and the more it was recorded higher rate in noise organic solvent heavy metals, etc. 2. The measured cases in institutes during 1994 were 1,596 companies, and excess cases were 157 companies(9.8%) among them. By the scale of workers, small scale cases under the 49 workers were 190 companies (17.9%) among 1,064 companies, cases of medium scale cases between 50-299 workers were 127 companies (27.9%) among 463 companies, and large scale cases over 300 workers were 31 companies(44.9%) among 69 companies. In this result industry of the highest rate shown was manufacture of basic metals in 20 companies exceeded among 53 companies (37.7%), and was manufacture of pulp, paper production in 14 companies exceeded among 40 companies(35.0%), and the excess rate were high in bigger scale. 3. Companies estimated by the data of excess cases and excess rate in 1993 were 30,474 implementation rate estimated for measurement of working environment was 34.3% of companies in korean industry. In this result, it was comparatively shown of measurement rate for the working environment in manufacture of pulp, paper product, manufacture of machinary and equipment n.e.c., and of high measurement rate and excess rate in manufacture of electrial machinary and apparatus, and manufacture of basic metals.

• 반도체디스플레이기술학회지
• /
• 제5권1호
• /
• pp.1-4
• /
• 2006

Recently, Ball Grid Arrays(BGAs) are getting used more frequently for a package type. The connectors on a BGA consist of a large number of small solder balls in a grid shape on its bottom side. However, since balls of BGAs mounted on PCBs are not visible, inspection before mounting them is indispensable. High speed non-contact 3D measurement technologies are necessary far real-time measurement of ball height, the most important inspection item. In this paper, an accurate 3D data acquisition system for BGAs is proposed that can acquire 3D profile at high speed using a 3D smart camera and laser slit ray projection. Some clipping and morphological filtering operations are employed to remove spiky error data, which occur due to reflections from some ball area to camera direction.