• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2043-2052
• /
• 2008

The increasing heat generation rates in CPU of notebook computers motivate a research on cooling technologies with low thermal resistance. This paper develops a closed-loop two-phase cooling system using a micropump to circulate a dielectric liquid(PF5060). The cooling system consists of an evaporator containing a boiling enhancement microstructure connected to a condenser with mini fans providing external forced convection. The cooling system is characterized by a parametric study which determines the effects of volume fill ratio of coolant, existence of a boiling enhancement microstructure and pump flow rates on thermal performance of the closed loop. Experimental data shows the optimal parametric values which can dissipate 33.9W with a film heater maintained at $95^{\circ}C$.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.109-115
• /
• 2009

The objective of this paper is to compare two national guidelines on the VDT work management published by Ministry of Labor(MOL) and Korean Standard(KS), and suggest possible modifications of them. The scope of this paper was limited to the desktop type of VDT jobs, excluding laptop environment. In addition, questionnaires were administered to office workers to collect information on the discomfort levels in meeting the MOL Notification. From ergonomic point of view, the most noticeable differences between two guidelines were found with respect to the heights of chairs and desks. In fact, the ranges specified in each guideline were not the same. In the field surveys, it could be known that work environments should be improved.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.9
• /
• pp.850-855
• /
• 2006

This is concerned with the development and design of automatic maneuvering system using Differential Global Positioning System(DGPS). To achievement of autonomous maneuvering controller for giant ship, first, we investigated automatic maneuvering controller using DGPS in motor car. The sensors are configured with DGPS and digital compass. We calculated velocity and steering angle of motor car based on sensor signal. To design the controller, we derived the bicycle model and developed critically damped controller. The critically damped controller can be tracing previously appointed position in the fastest time. We are used a laptop computer to realize and the control algorithm is programmed by visual basic software. The obtained experimental results from developed system show unmanned motor car is good tracing planed positions. Hence, the system is looking forward to use the autonomous maneuvering control fur giant ship.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.35-41
• /
• 2018

Smart device has become an affordable main computing resource for robotic ap-plications in accordance with a fast growth of mobile internet environment. Since the computing power of smart device has been increased, smart device based ro-bot system attempts to replace traditional robot applications with laptop-based system. Methodologies for acquisition of remote sensory information and control of various types of robots using smart device have been proposed recently. In this paper, we propose a robot control system using a monitoring program and a communication protocol. The proposed system is a combination of an educa-tional programming oriented robot named EPOR-S. as small service robot plat-form and a smart device. Through a simulation study using image processing, the feasibility of combination of the proposed robot monitoring program and control system was verified.

• Journal of Convergence Society for SMB
• /
• v.4 no.4
• /
• pp.19-23
• /
• 2014

Group communication is becoming increasingly popular in Internet applications such as videoconferences, online chatting programs, games, and gambling. For secure communications, the integrity of messages, member authentication, and confidentiality must be provided among group members. To maintain message integrity, all group members use the Group Key (GK) for encrypting and decrypting messages while providing enough security to protect against passive attacks. Tree-based Group Diffie-Hellman (TGDH) is an efficient group key agreement protocol to generate the GK. TGDH assumes all members have an equal computing power. One of the characteristics of distributed computing and grid environments is heterogeneity; the member can be at a workstation, a laptop or even a mobile computer. Member reordering in the TDGH protocol could potentially lead to an improved protocol; such reordering should capture the heterogeneity of the network as well as latency. This research investigates dynamic reordering mechanisms to consider not only the overhead involved but also the scalability of the proposed protocol.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.220-224
• /
• 2012

We report an experimental demonstration of $4{\times}4$ multiple-input multiple-output (MIMO) wireless visible light communications (VLC) using a charge-coupled device image sensor receiver instead of a photodiode receiver. An image sensor is a kind of digital camera, which is used in most mobile devices such as smart phones or laptop computers and a promising commercial candidate for a VLC receiver. The transmission distance of the experimental result is over 10 m, enough for most indoor communication applications. We expect that the MIMO VLC technique based on image sensor receivers can be widely used with the development of high-speed image sensors.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.4
• /
• pp.21-31
• /
• 2013

It is not easy to control the unstructured digital contents efficiently which are usually created while carrying out the wide scope of managerial activities. Moreover, besides the existing EDMS method, new methodologies including new-type servers and clients like SBC, VDI, thin client, zero client, etc are said to be more efficient for managing digital contents. Usually, digital contents has been created and stored in the dispersed individual computers like laptop or desktop. Today, due to the advent of new technologies and devices for computer systems and network capacity, it's possible to store whole digital contents within centralized storage like EDMS. In this paper, it is shown how digital contents can be controled through selection of which approaches are used for individual users and storage servers. For alternatives, we explained implementation, merits and demerits, selection criteria, etc. And a case of the implementation of digital contents control is shown for the reference of related systems.

• Proceedings of the Korea Contents Association Conference
• /
• 2018.05a
• /
• pp.7-8
• /
• 2018

This study proposes an analysis of the Word2vec-based machine learning classifiers for the sake of opinion mining tasks. As a bench-marking method, BOW (Bag-of-Words) was adopted. On the basis of utilizing the Word2vec and BOW as feature extraction methods, we applied Laptop and Restaurant dataset to LR, DT, SVM, RF classifiers. The results showed that the Word2vec feature extraction yields more improved performance.

• Annual Conference of KIPS
• /
• 2018.10a
• /
• pp.792-794
• /
• 2018

본 연구에서는 일반적으로 R,G,B 색 평면의 높은 상관관계를 이용하여 컬러 복원을 시도하던 기존의 방법의 문제점을 정의하고, DCGAN을 활용한 디모자이킹에 관한 연구를 소개한다. 약 2000장의 $256{\times}256$ 이미지를 학습데이터를 이용하였다. 보다 나은 결과를 위하여 R,G,B 색상 채널에 따라 각각의 네트워크를 구성하고 학습하였다. 제안 방법은 Intel Core i7-7770 CPU(3.60GHz), 16GB Memory,NVIDIA GeForce GTX1080Ti 구성의 Laptop에서 진행하였고, 평균 PSNR 22.5dB 정도의 성능을 보인다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1823-1824
• /
• 2007

핸드폰, PDA, Laptop이 보편화 되면서 이를 이용한 위치 인식 기술의 중요성이 높아지고 있다. 이러한 위치기반 서비스(LBS : Location Based Service)는 GPS를 이용한 실외 서비스와 WLAN, Zigbee, UWB 등을 이용한 실내 서비스로 나눌 수 있다. 본 논문에서는 이미 많은 수의 기반시설(AP : Access Point)가 구축되어 있는 무선랜 기반의 효과적인 위치 측정 기법에 관한 연구를 모색 해보고자 한다. 각 AP에서 받은 신호세기(SS : Signal Strength)를 데이터 베이스에 저장한 후, 이동단말기(MU : Mobile Unit)의 위치가 요구되는 장소에서 다시 신호세기를 측정하여 데이터 베이스와 비교하여 가장 적합한 위치 데이터 정보를 리턴하는 핑거프린트(Fingerprint) 방식을 소개한다. 그리고 불안정한 신호 세기 데이터를 판별하기 위하여 단일 클래스 SVM 기법인 SVDD(Support Vector Data Description)을 이용하였다.