• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.7-10
• /
• 2002

The diagnosis of faults of machine tool, which is controlled by CNC and PLC, is generally based on ladder diagram of PLC. Because sequential controls for CNC and servo motor are mostly processed in PLC. However, when fault is occurred, a searching for logical relation to fault reasons is required a lot of fault experiences and times, because PLC program has step structure. In this paper, FDS(Fault Diagnosis System) is developed and implemented to machine tool with open architecture controller in order to find the reason of fault lastly and correctly. The diagnosed reasons for fault are tele-serviced on web through developed RSS(Remote Service System). The operationability and usefulness of developed system are evaluated on specially manufactured machine tool with open architecture CNC. The results of this research can be the model of remote monitoring and fault diagnosis system of machine tool with open architecture CNC.

• Elastomers and Composites
• /
• v.55 no.2
• /
• pp.103-107
• /
• 2020

Herein, resin-formed polysilsesquioxanes (PSSQs) were synthesized using monomolecular fluoro silane as a precursor. The synthesized PSSQs exhibited anti-smudge performance and were used as coating liquid. Two structures were acquired by controlling the amount of the silane precursor and the K₂CO₃ catalyst; these materials were used to prepare the anti-smudge coating liquid solution. The synthesized product was analyzed by various methods such as nuclear magnetic resonance spectroscopy, X-ray diffraction analysis, gel permeation chromatography, and water contact angle measurement. The results confirmed that the as-synthesized PSSQs exhibited the ladder structure and had a molecular weight of 5,117 g/mol and water contact angle of 102.31°.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.89-97
• /
• 2003

The faults diagnosis of machine tool, which is controlled by CNC(Computer Numerical Control) and PLC(Programmable Logic Controller), is generally based on ladder diagram of PLC because sequential controls for CNC and servo motor are mostly processed in PLC. However, when fault is occurred, a searching of logical relationship for fault reasons is required a lot of diagnosis experiences and times because PLC program has step structure. In this paper, FDS(Fault Diagnosis System) is developed and implemented to machine tool with open architecture controller in order to find the reason of fault fast and correctly. The diagnosed reasons for fault are remote serviced on web through developed RSS(Remote Service System). The operationability and usefulness of developed system are evaluated on specially manufactured machine tool with open architecture CNC. The results of this research can be the model of remote monitoring and fault diagnosis system of machine tool with open architecture CNC.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.6
• /
• pp.539-542
• /
• 1995

The crystal structure of K92-X (K92Al92Si100O384), a=25.128(1) Å, dehydrated at 360 ℃ and 2X 10-6 Torr, has been determined by single-crystal X-ray diffraction techniques in the cubic space group Fd&bar{3} at 21(1) ℃. The structure was refined to the final error indices R1=0.044 and Rw=0.039 with 242 reflections for which I<3σ(I). In this structure, ninety-two K+ ions are located at the five different crystallographic sites. Sixteen K+ ions are located at the centers of the double six rings (site I; K(1)-O(3)=2.65(2) Å and O(3)-K(1)-O(3)=92.0(6)°). About twelve K+ ions lie at site I' in the sodalite cavity opposite double six rings (D6R's) and these K+ ions are recessed ca. 1.62 Å into the sodalite cavity from their O(3) plane (K(2)-O(3)=2.74(2) Å, O(3)-K(2)-O(3)=88.5(8)°). About thirty-two K+ ions are located at the site II in the supercage and these K+ ions are recessed ca. 1.20 Å into the supercage from their O(2) plane (K(3)-O(2)=2.64(2) Å, and O(2)-K(3)-O(2)=101(1)°). About twenty-two K+ ions lie at the site III in the supercage opposite 4-ring ladder and the remaining ten K+ ions lie at the site III' near the 4-ring ladder in the supercage (K(4)-O(4)=2.88(3) Å, O(4)-K(4)-O(4)=79.8(9)°, K(5)-O(4)=2.8(2) Å, and O(4)-K(5)-O(4)=68(5)°).

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.4
• /
• pp.77-90
• /
• 2015

This study is to designed to provide foundation for knit design which can apply the thickness and flexibility of jacquard knit by analyzing and comparing mechanical properties of 7 types of jacquard (normal jacquard, bird's eye jacquard, floating jacquard, tubular jacquard, ladder's back jacquard, blister jacquard, transfer jacquard) widely used in knit design to achieve the results. The sample was projected by using 7 gauge and SES-122S type computer knitting machine house tooth pattern with two colors were applied to 7 types of jacquard using Acrylic/Wool(30%/70%) $2/50.5^{\prime}s{\times}4ply\;yarn$ by Shimaseiki MFG., Ltd computer knitting machine. The mechanical properties of 7 types of jacquard samples were measured using KES-FB (Kawabata Evaluation System for Fabric, Kata Tech Co. Ltd). HV(Hand Value) and THV (Total Hand Value) were calculated by using the formula of KN-402-KT and KN-301-WINTER respectively. The measurements were evaluated by 0-to-5 rating scale. As result, the floating jacquard was found to have excellent drape, making it suitable for express feminine silhouette with its most flexible and smooth touch. On the other hand, bird's eye jacquard is adequate for a suit jacket and coat regarding its excellent volume and flexibility. Blister jacquard and tubular jacquard are thick, heavy and stiff knit and both are suitable for simple box-style design. Ladder's back jacquard, however, is more appropriate for expressing the design of feminine charm and voluminous design. Based on the result of this study, it is supposed to provide basic information for development of knit industry regarding jacquard knit by designing the creative knit wear with high production efficiency.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.1-6
• /
• 2005

We have studied the polarization effects and the coupling intensity effects of electromagnetically induced transparency(EIT) in the 5S$_{1}$2-/5P$_{3}$2-/5D$_{5}$2/ ladder system of Rb. We obtained the EIT spectrum with the hyperfine structure of 5D$_{5}$2/ transitions and the minimal width of the measured EIT spectrum was 6.5 MHz. We observed the change of the relative magnitudes of the hyperfine structure of EIT according to not only the polarizations of lasers but also the intensity of the coupling laser. The cause of the coupling intensity effects is that the EIT signal nonlinearly increases to the coupling intensity.

• Journal of Microbiology
• /
• v.34 no.1
• /
• pp.40-48
• /
• 1996

We have examined the chromatin structure of the HMRE/HSP82 and HMRa/HSP82 allels using three complementary approaches : DNase I chromating footprinting, micrococcal nuclease (MNase) nucleosome-protected ladder assay, and an in vivo E. coli dam methylase accessibility assay. The footprinting results indicate that the promoter and silencer sequences are assembled into nucleoprotein complexes which exhibit no detectable change in structure, despite a 70-fold range in expression levels. In addition, the promoter region of the HMRa/HSP82 allele is cleaved randomly by MNase in all cases, indicating the absence of anonical nucleosomes over this region irrespective of SIR4 or heat-shock. Finally, no discernible difference in the accessibility of the HMRE/HSP82 locus to dam methylase in SIR4 vs. sir4 cells was seenm which again suggests that the chromatin structure of HMRE/HSP82 allele is identical regardless of SIR4. Altogether, our results indicate that in contrast to other observations of the silent mating-type loci, no discernible structural alteration is detected at either HMR/HSP82 allele regardless of SIR genetic background or transcriptional state of the gene.

• Safety and Health at Work
• /
• v.7 no.3
• /
• pp.185-193
• /
• 2016

Background: Management and workers in small and medium-sized enterprises (SMEs) often find it hard to comprehend the requirements related to controlling risks due to exposure to substances. An intervention study was set up in order to support 45 SMEs in improving the management of the risks of occupational exposure to chemicals, and in using the control banding tool and exposure model Stoffenmanager in this process. Methods: A 2-year intervention study was carried out, in which a mix of individual and collective training and support was offered, and baseline and effect measurements were carried out by means of structured interviews, in order to measure progress made. A seven-phase implementation evolutionary ladder was used for this purpose. Success and failure factors were identified by means of company visits and structured interviews. Results: Most companies clearly moved upwards on the implementation evolutionary ladder; 76% of the companies by at least one phase, and 62% by at least two phases. Success and failure factors were described. Conclusion: Active training and coaching helped the participating companies to improve their chemical risk management, and to avoid making mistakes when using and applying Stoffenmanager. The use of validated tools embedded in a community platform appears to support companies to organize and structure their chemical risk management in a business-wise manner, but much depends upon motivated occupational health and safety (OHS) professionals, management support, and willingness to invest time and means.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.5
• /
• pp.435-443
• /
• 2001

As power durable RF SAW filters, AL-(0∼2wt%)Cu alloy multi-layered thin electrodes were deposited on 42° LiTaO$_3$ piezoelectric substrates by magnetron sputtering process, and then ladder-type RF SAW filters, satisfying the electrical specification of CDMA transmission band, were fabricated through optimizing SAW resonator structures. The temperature of film electrodes in SAW filter was increased with RF power, and reached the maxima to cause a failure of SAW filters at the cut-off frequencies of the RF filter band. As RF power increases, the electrodes of Al-Cu alloy showed higher power durability than that of pure Al. The multi-layer laminated film of Al-1wt.% Cu/Cu/Al-1wt%Cu resulted in the best power durability up to 4W of RF power. Every film electrode, however, was destroyed within seconds whenever applying a critical RF power to SAW filters, regardless of the composition and structure of film electrodes. The breakdown of film electrodes under FR power seems to believe due to the fatigue of electrodes caused by repetitive cyclic stress of surface acoustic wave, which is amplified as RF power increases.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1983.10a
• /
• pp.56-60
• /
• 1983

There has been a great amount of interest in the design of digital filters with low sensitivity to coefficient variations. Especiaily the wave digital filter modeled after analog IC ladder filter has been studied to have low-cocfficient-sensitivity properties. This paper examined the design of the wave digital filter and how the sensitivity and roundoff noise porperty arises. As a result of computer simulation the implementation of the digital filter was possible with a lower coefficient word length comparing with the conventional cascade structure.