• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.111-114
• /
• 2003

In this paper, an industrial electric endoscope is implemented. Most industrial endoscope that used in domestic are imported and the equipments are divided into several parts. So these endoscopes spend a lot of time, labor and inspection cost on inspection process. This research is accomplished to solve above mentioned weak points and to improve previous inspection systems into embedded systems.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.4
• /
• pp.429-436
• /
• 2008

Membrane system has been increasingly considered as a safe and cost-effective water treatment process especially in case of small scale water works. This research is a basis of membrane application in water works through a long period test with obtaining operation skills and evaluation of water quality and cost competitiveness. For the research, the UF membrane system was installed in small water treatment plant that uses river-bed water as raw water. The system was consisted of 2 stage membrane and operated in constant flow mode (Flux: 1.5, 1.0, 0.9, 0.6). In each different flux condition, TMP trends were showed better results at lower flux condition. And through the high flux condition test, it is certified that membrane system could deal with breakdown of one stage. Water quality of permeate was satisfied the water quality standards especially turbidity. To know what mainly causes fouling on membrane, the test by membrane with several cleaning agents and EDX analysis have done in lab. Through the tests, ferrous concentration in raw water, backwashing water and membrane surface etc. was high and it causes fouling inside and outside of membrane. So acid cleaning using organic acid such as oxalic acid is necessary in Chemical in Place (CIP). At the economical aspect the electrical cost of membrane system is higher than that of slow sand filtration but labor cost can be reduced by automation. However, the use of labor should be determined considering effectiveness and stability of operation. Because during the operation, there are several breakdown such as electrical shock by lightning, water drop in summer, etc.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.105-111
• /
• 2009

Construction equipment is a very important factor for successful construction. Also, the cost for construction equipment is a major part of the cost of construction. Therefore, the estimation of the equipment cost is a critical task in construction planning. A formula for production rates shown in 'Standard Unit Labor' has been used to estimate construction equipment capability and cost. Although the performance of the equipment has improved over time, the variables in the formula have not been updated in a timely manner. Therefore, this paper has analyzed the preceding research, and performed several site visits to measure the cycle time of a backhoe and a loader. Construction equipment production rates were calculated with collected cycle times and variables given in 'Standard Unit Labor'. In addition,production rates were estimated considering the circumstances of various sites with the simulation program 'crystal ball.'

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.263-268
• /
• 2005

Nowadays, the vessel size is tending to be bigger and bigger, so port facilities are following this trend, which has been shown inthe competition of Hub-Port among the main ports such as Port of Busan and Port of Shanghai. But there are limited numbers of large container vessels and $70\%$ of the call ships at Busan port are middle and small sized ships which are less than 20,000ton. So we need to consider the handling facilities for these sized ships, but it has disregarded. In this paper, we estimate the optimum level of crane and labor according to vessel's size by container handling cost value reflecting size of vessel; size and number of crane and labor structure.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.409-420
• /
• 2021

The safety and health ledger system, which gives the responsibility of safety and health management for construction site workers to the construction project owner, was introduced as part of the overall revision of the Occupational Safety and Health Act. There is a need to explain the system's effectiveness in terms of economic feasibility to solve the execution problem of the system caused by low awareness and implementation rate. In this study, the economic effect of implementing the safety and health ledger system was analyzed using cost-benefit analysis based on the data discussed at the time of the introduction of the system. Results show that creating and managing the design safety and health ledger caused additional costs in implementing the system. As a result of comparing the cost of preparation and the direct and indirect benefits caused by the reduction of industrial accidents, the benefits were evaluated higher than the costs. Thus, it is thought that the safety and health ledger system reduces construction work accidents and generates economic effects.

• Journal of the Korean Dietetic Association
• /
• v.9 no.2
• /
• pp.128-137
• /
• 2003

The purposes of this study were to investigate the current status of contracted hospital food services and to find out the difference in accordance with the number of beds in hospitals. Thirty six hospitals having more than 100beds in Seoul, Inchon and Kyungkido were the subjects of this study. Data was collected through surveys. The survey was conducted during March and April in 2002. The Questionnaires were mailed to the 36 directors of dietetic departments of the hospitals and 36 managers of contracting patient food services. Statistical analysis was completed using SPSS Win(11.0) for descriptive analysis and t-test. The results of the study are summerized as follows; Ⅰ. Hospital perspective : The range covered by contract food service was 63.3% and 36.7% in hospital food services, and medical nutrition services. The patient and employee food services were in 83.3%, and patient food services were in 6.7%. The methods selecting contractors are general, limited, selected and competitive biddings, and private contracts. The responsibility for supervision of contract food services was the dietetic department (51.7%) in most cases. Hospitals having personnel responsible for contracting affairs were in 75.9% of the cases and 24.1% did not have personnel. The biggest reason for contracting was facilitation of personnel management. The most important criteria on selecting food services contractors was the professionality of the contractor. Ⅱ. Contractor's perspective : The cost per meal in the year 2001 was composed of 1,905 won for food cost, 1,081 won for labor cost, 222 won for expenses, 114 won for VAT, 14 won for rent and 146 won for miscellaneous or controllable expense, representing 109 won loss per meal. The profit-and-loss contract cost is higher than the fee-contract cost. The ratios of food cost, labor cost and expenses are higher and the ratios of miscellaneous or controllable expense, VAT, rent and profit are lower in hospitals with more than 400 beds compared with those less than 400 beds. However, no significant differences are present between these two groups of hospitals. The actual contract period was 2.2 years upon initial contract and 1.2 years upon renewal. The initial investment cost was 53 million won and the cost of renovation and repair was 8.5 million won. Significant differences were present between two groups of hospitals. The conditions of employment and number of personnel hired by contractors for contract patient food services were significantly different according to the number of beds.

• Journal of Korea Port Economic Association
• /
• v.24 no.2
• /
• pp.43-69
• /
• 2008

The labor contract Law has been prepared as an important solution for social stability. After long disputes around the orientations of the law, On June 29, 2007, the new Chinese labor contract law is passed. This law reflects the changing labor relations because of economic reforms like restructuring of the state-owned enterprises and so on. This law contains more market-oriented clauses that are supplemented by corporatist scheme supported by trade unions than the first draft. This law emphasize labor's rights and interests to remove prior labor contract problem. So Chines government see this law as standard law to restructure social relationship and also require firms to corporate social responsibility. Therefore, implementation of the new Chinese labor contract law bring about increasing labor cost, infringement of autonomy for human resource management, rigidity of industrial relations. Under these situation, Korean shipping and port logistics companies need to introduce management system of minimized employment, prepare human resource management in response to long-term employment, maintain favor relationship with trade union, and set up counteiplan about risk of a labor dispute.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.93-99
• /
• 2015

This paper is on a practical method for determination of the economical steel ratio in RC flexural members with an equal safety factor. The cost functions of each material and labor are considered to construct the cost function. Then, an equation for determination of the economical flexure steel ratio with the lowest construction cost were proposed. It was found that a relevant steel ratio is recommended to be 0.65~1.0% for designing singly reinforced rectangular beam.

• Journal of Korea Port Economic Association
• /
• v.22 no.2
• /
• pp.61-82
• /
• 2006

In order to cope with improvement of labor cost and cargo volume, Korean ports, especially Busan port, are in need of many new facilities. Of course, current facilities should be fully used, and at the same time it needs to make every effort to maximize its productivity as well as cost saving. To this end, this study has decided to focus on automatic yard operation suitable to the domestic container terminal environments, making a survey of many advanced container terminals, trying to find out their common factors, and finally suggesting several alternatives based on the combination of these factors. Also, this study has suggested the present value of initial investment and operating cost by alternative, and at the same time presented the relationship between cargo handling volume and cost/revenue of the optimal alternative, so that it may be of help in decision making.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.132-133
• /
• 2015

Efficient scheduling and resource management are the key factor to reduce construction project budget (e.g., labor cost, equipment cost, material cost, etc.). Resource-based line of balance (LOB) technique has been used to complement the limitations of time-driven scheduling techniques (e.g., critical-path method). Optimizing construction alternatives contributes cost savings while honoring the project deadline. However, existing LOB scheduling is lack of identifying optimal resource combination. This study presents a method which identifies the optimal construction alternatives, hence achieving resource minimization in a repetitive construction by using genetic algorithm (GA). The method provides efficient planning tool that enhances the usability of the system.