• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.83-88
• /
• 2016

We treat device-to-device direct communication (D2D) by reusing cellular uplink resources in LTE-Advanced systems. Conventional schemes assume that D2D transmitter employs SC-FDMA scheme for the date transmission. In the conventional schemes, however, it is very difficult to reduce the interference between the users, D2D communication cannot be used when the interference caused by cellular uplink signal is high. In this paper, we propose D2D transmission scheme which employes MC-CDMA technology and D2D detection scheme which uses MMSE algorithm to reduce interference from the cellular uplink signal. Therefore, in the proposed scheme the D2D communication becomes possible even in the high interference scenario. Through simulation, we show that the proposed scheme has better BER performance than the conventional scheme.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.739-747
• /
• 2013

This paper investigates the multifarious nature of the long-term evolution (LTE) scheme and that of the modified LTE scheme for symbol timing synchronization (STS). This investigation allows us to propose a new replica correlation-based STS scheme to overcome the inherent weaknesses of the other two schemes. The proposed STS signal combines a gold sequence and a half sine wave in the time domain, whereas conventional STS signals specify either binary sequences or complex sequences in the time domain or in the frequency domain. In the proposed scheme, a sufficient correlation property is realized by the gold sequence, and robustness against the frequency offset (FO) is achieved through the sine wave. Compared to the existing LTE-related schemes, the proposed scheme can better achieve immunity to FO and reduction in detector complexity, as well as a low peak-to-average power ratio and a low detection error rate. Performance evaluations through analysis and simulation are provided in the paper to demonstrate these attributes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.279-285
• /
• 2017

The study on 'support for V2V(Vehicle to Vehicle) services based on LTE sidelink' has been carried out in 3GPP RAN working group. The conventional LTE sidelink technology is not adequate for high speed V2V communications because the conventional DM-RS(Demodulation Reference signal) structure is developed for pedestrian environment. While the typical speed of pedestrian environment is 3km/h, that of V2V communications is 120 km/h and the information on channel estimation is not sufficient with legacy DM-RS structure. In this paper, improved DM-RS structures for V2V communications that have rapid channel variation are introduced and the performance of channel estimation accuracy is analyzed. Simulation results show that the performance improvement of channel estimation can be achieved based on extended sub-carrier spacing structure resulted from reduced inter-carrier interference. However, the extended sub-carrier spacing requires the longer cyclic prefix and higher overhead. As a results of considerations on DM-RS modification, the sub-carrier spacing is maintained and the high density of DM-RS is applied for V2V communications.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.3
• /
• pp.151-156
• /
• 2020

A technology for calculating the position of a device is very important for users who receive positioning services, regardless of various indoor/outdoor or with/without any positioning infrastructure existence environments. One of the positioning resources widely used at present, LTE, is a typical infrastructure that can overcome the space limitation, however its positioning method based on the position of the LTE base station has low accuracy. A method of constructing a radio wave map of an LTE signal has been proposed as a method for overcoming the accuracy, but it takes a lot of time and cost to perform high-density collection in a wide area. In this paper, we describe a method of creating a high-density DB for the entire region by using vehicle-based partial collection data. To create a positioning database, we applied the idea of Generative Adversarial Network (GAN), which has recently been in the spotlight in the field of deep learning, and learned the collected data. Then, a virtually generated map which having the smallest error from the actual data is selected as the optimum DB. We verified the effectiveness of the positioning DB generation algorithm using the positioning data obtained from un-collected area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.10
• /
• pp.937-945
• /
• 2014

As various services requiring high data rate are supported by introducing LTE/LTE-adv., mobile traffic increases rapidly. To cope with the continuous growth of traffic demand, small cell technology is considered as one of the most promising one. Small cell can increase system capacity by increasing the number of base stations with reduced cell radius. In this paper, we analyze the effect of cell densification with small cells in terms of SINR and average UE throughput considering cell split and the number of UE per unit area. As the cell becomes smaller, SINR degradation arises from high ICI(Inter Cell Interference) and we evaluate the effect of interference mitigation scheme in small cell environment where the proper interference mitigation technique is applied.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.4
• /
• pp.23-31
• /
• 2018

This paper presented the implementation and design of the 2T-2R wireless HD video streaming systems over 1.7 GHz frequency band using 3GPP LTE-TDD standard on NI USRP RIO SDR platform. The baseband of the system used USRP RIO that are stored in Xilinx Kintex-7 chip to implement LTE-TDD transceiver modem, the signal that are transmitted from USRP RIO up or down converts to 1.7 GHz by using self-designed 1.7 GHz RF transceiver modules and it is finally communicated HD video data through self-designed 2x9 sub array antennas. It is that communication method between USRP RIO and Host PC use PCI express x4 to minimize delay of data to transmit and receive. The implemented system show high error vector magnitude performance above 32 dBc and to transmit and receive HD video in experiment environment anywhere. The proposed hybrid beam forming system could be used not only in the future 5G mobile communication systems under 6 GHz frequency band but also in the systems over 6 GHz frequency band like ones in mmWave frequency bands.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.577-584
• /
• 2017

Long Term Evolution device-to-device (LTE D2D) is a key technology to mitigate data traffic load in a cellular system. It facilitates direct data exchange between neighboring users, which is preceded by D2D discovery. Each device advertises its presence to neighboring devices by broadcasting its discovery message. In this paper, we develop a mathematical analysis to assess the probability that discovery messages are successfully transmitted at the D2D discovery stage. We make use of stochastic geometry for modeling spatial statistics of nodes in a two dimensional space. It reflects signal to noise plus interference ratio (SINR) degradation due to resource collision and in-band emission, which leads to the discovery message reception probability being modeled as a function of the distance between the transmitter and the receiver. Numerical results verify that the newly developed analysis accurately estimates discovery message reception probabilities of nodes at the D2D discovery stage.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.924-930
• /
• 2014

This paper presents a $0.13{\mu}m$ CMOS 3-level envelope delta-sigma modulation (EDSM) RF signal generator, which synthesizes a 2.6 GHz-centered fully symmetrical 3-level EDSM signal for high-efficiency power amplifier architectures. It consists of an I-Q phase modulator, a Class B wideband buffer, an up-conversion mixer, a D2S, and a Class AB wideband drive amplifier. To preserve fast phase transition in the 3-state envelope level, the wideband buffer has an RLC load and the driver amplifier uses a second-order BPF as its load to provide enough bandwidth. To achieve an accurate 3-state envelope level in the up-mixer output, the LO bias level is optimized. The I-Q phase modulator adopts a modified quadrature passive mixer topology and mitigates the I-Q crosstalk problem using a 50% duty cycle in LO clocks. The fabricated chip provides an average output power of -1.5 dBm and an error vector magnitude (EVM) of 3.89% for 3GPP LTE 64 QAM input signals with a channel bandwidth of 10/20 MHz, as well as consuming 60 mW for both channels from a 1.2 V/2.5 V supply voltage.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.83-91
• /
• 2014

The passive UHF RFID tags for item-level tagging are now explosively used in the supply chain and retail applications as they have several advantages, the two most relevant are cost and a longer read range. However, the signal interference problem between RFID tags and smart devices in real world is expected according to the smart-phone and tablet market growth together. The performance of RFID tags can be significantly less. The popular examples are the read-success rates and read range reduction. Especially, KT Corp. recently emphasized the serious signal interference at 900 MHz of LTE and old RFID frequencies through their public demonstration. By popular demands, this paper suggests the interference tolerance measurement method between the passive UHF RFID tag and the transmitted signal from a smart device. In addition, we selected three passive UHF RFID tags(Inlay) available on the market and quantitatively evaluated read range reduction results by interference signals using the PCR(Performance Change Rates) index. As a result, the LTE system is about three times as effective as the WCDMA system in terms of interference effects, and the read range performance of two RFID tags about 60 % drop.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.19-24
• /
• 2016

In Long Term Evolution-Advanced (LTE-A), small cell enhancement(SCE) has been developed as a cost-effective way of supporting exponentially increasing demand of wireless data services and satisfying the user quality of service(QoS). However, due to the dense and irregular distribution of a large number of small cells, the offloading scheme should be applied in the small cell network. In this paper, we propose an user offloading scheme for SCE in LTE-Advanced system. We divide the small cells into different clusters according to the reference signal received power(RSRP) from user equipment(UE). Within a cluster, We apply the user offloading scheme with the consideration of the number of users and interference conditions. Simulation results show that proposed scheme can improve the throughput, and spectral efficiency of small cell users. Eventually, proposed scheme can improve overall cell performance.