• 제목/요약/키워드: LTE Band 8

검색결과 36건 처리시간 0.027초

LTE용 이중 T 안테나 연구 (Dual T type antenna study for LTE communication)

  • 박용욱
    • 한국전자통신학회논문지
    • /
    • 제10권1호
    • /
    • pp.7-12
    • /
    • 2015
  • 본 논문에서는 LTE 통신을 위한 1.8 GHz 대역의 이중 T 구조 안테나를 연구하였다. 선로 방식으로는 마이크로 스트립 방식과 CPWG 방식을 채택하였고 특성 평가를 위해 안테나 제작 및 특성을 측정하였다. 각 선로방식의 안테나를 주파수와 반사손실에 관한 파라미터 특성을 HFSS(High Frequency Structure Simulator)를 통해 분석하고 이것을 이용하여 안테나를 설계하였다. 실제 제작한 1.8 GHz 대역의 이중 T 구조 안테나가 보여준 특성은 중심주파수 1.79 GHz 에서 입력반사손실 -23.26 dB, 대역폭 23 MHz의 결과 값을 보여 주었다.

0.6~6 GHz 초 광대역 쿼드릿지 혼 안테나 설계 (Design of 0.6~6 GHz Ultra Wideband Quad-ridge Horn Antenna)

  • 최철진;이문희;손태호
    • 전기학회논문지
    • /
    • 제68권1호
    • /
    • pp.77-82
    • /
    • 2019
  • In this paper, a 0.6~6GHz quad-ridge horn antenna which can be used for the antenna measurement of 5.8GHz WiFi system from lowest frequency band of mobile LTE (Long Term Evolution) is designed and implemented. The quad-ridge horn antenna has quadruple ridges of exponential function, a back-short and a cavity. Based on this structure, we design the cavity size, ridge gap and feed gap to have broadband characteristics. For implementation, the plates material of aluminum and copper are used for the horn and four ridges, respectively. And the insulator supports are used to maintain the gap between ridges. By measurement, antenna has the gain of 6.2~13.35dBi with the return loss of less than -6dB (under VSWR 3 : 1) in the entire design band. The results of this study can be widely used to the antenna studies on the mobile communication including low frequency band of LTE, the EMI measurement and the standard calibration measurement.

커플링 급전을 이용한 모바일용 다중대역 안테나에 관한 연구 (A Study on Multi-band Antenna for Mobile using Coupling Feeding)

  • 왕정;윤인섭;황선국;염효가;박효달
    • 한국정보전자통신기술학회논문지
    • /
    • 제7권4호
    • /
    • pp.188-194
    • /
    • 2014
  • 본 논문은 LTE (0.746 ~ 0.798 GHz), GSM(0.824 ~ 0.960 GHz), DCS(1.71 ~ 1.88 GHz), WCDMA(1.91 ~ 2.17 GHz) 대역에서 사용 가능한 다중 대역 모바일 안테나에 대하여 제안하였다. 제안된 안테나는 기본적인 PIFA 구조에 두 개의 브랜치 라인을 추가하여 다중대역을 형성하고, 커플링 급전 방식을 사용하여 대역폭을 향상시킨 안테나이다. 안테나의 크기는 $122mm{\times}50mm{\times}0.8mm$이며, FR4(${\epsilon}_r=4.4$)를 사용하였으며, 측정결과 VSWR < 2(${\leq}-10dB$)을 기준으로 모든 주파수 대역을 만족하였다. 제안된 다중대역 안테나는 낮은 주파수대역에서 0.93 ~ 1.92 dBi의 이득과 49.60 ~ 76.35 %의 방사효율 특성을 보이고, 높은 주파수대역에서는 2.19 ~ 4.66 dBi의 이득과 60.40 ~ 80.01 %의 방사효율 특성을 보였다. 따라서 본 논문에서 제안한 다중대역 안테나는 현재 상용화 되어있는 이동통신 단말기용 안테나에 비해 전 대역에서 우수한 특성을 확인하였다. 이와 같은 우수한 특성으로 인하여 본 연구에서 제안된 안테나는 4세대 모바일 단말기뿐만 아니라 향후 개발하고 있는 B4G용 안테나로 적용 가능 할 것으로 판단된다.

A 0.13-㎛ Zero-IF CMOS RF Receiver for LTE-Advanced Systems

  • Seo, Youngho;Lai, Thanhson;Kim, Changwan
    • Journal of electromagnetic engineering and science
    • /
    • 제14권2호
    • /
    • pp.61-67
    • /
    • 2014
  • This paper presents a zero-IF CMOS RF receiver, which supports three channel bandwidths of 5/10/40MHz for LTE-Advanced systems. The receiver operates at IMT-band of 2,500 to 2,690MHz. The simulated noise figure of the overall receiver is 1.6 dB at 7MHz (7.5 dB at 7.5 kHz). The receiver is composed of two parts: an RF front-end and a baseband circuit. In the RF front-end, a RF input signal is amplified by a low noise amplifier and $G_m$ with configurable gain steps (41/35/29/23 dB) with optimized noise and linearity performances for a wide dynamic range. The proposed baseband circuit provides a -1 dB cutoff frequency of up to 40MHz using a proposed wideband OP-amp, which has a phase margin of $77^{\circ}$ and an unit-gain bandwidth of 2.04 GHz. The proposed zero-IF CMOS RF receiver has been implemented in $0.13-{\mu}m$ CMOS technology and consumes 116 (for high gain mode)/106 (for low gain mode) mA from a 1.2 V supply voltage. The measurement of a fabricated chip for a 10-MHz 3G LTE input signal with 16-QAM shows more than 8.3 dB of minimum signal-to-noise ratio, while receiving the input channel power from -88 to -12 dBm.

광대역 및 협대역을 동시에 사용하는 부분방전 측정 시스템 모듈 개발 (Development of Partial Discharge Measuring System Module by use of Wide and Narrow Band)

  • 이종오;유경국;신인권;장덕진;안창환
    • 조명전기설비학회논문지
    • /
    • 제29권8호
    • /
    • pp.98-103
    • /
    • 2015
  • Power plant is that very high reliability when industrial and economic impact on the overall electric power system is required, it is essential to improve the reliability, especially the fault prediction diagnosis. Since an accident caused by the partial discharge in the power plant is above state has a faster response characteristic than the other indications in the case of any, the partial discharge generated in the power plant immediately detect the deterioration of insulation due to the accident of the power plant and the non-drawn It should prevent or reduce. Partial Discharge Measuring Systems for UHV SF6 Gas Insulated Switchgear and power transformer on site installed has some probability of abnormal recognition in case of non-flexible deal with on site noise. Many methode to eliminate these kinds of noises, UHF Detection System is chosen as purchase description in Korea, but this system having a bandwidth between 500MHz 1.5GHz wide band. Initial install periods(about 20 years ago), this band had no strong signal source, but in these days this wide band have strong signals, such as LTE. So, module described in this paper is designed as simultaneously use with wide and narrow band for solve this noise problem, and introduce this system.

다양한 변조 신호의 1.8 GHz 대역 VSWR 측정 개선에 관한 연구 (Improvement of VSWR Measurement for Various Modulated Signals at 1.8 GHz Band)

  • 박상진;강성민;구경헌
    • 한국전자파학회논문지
    • /
    • 제22권9호
    • /
    • pp.833-839
    • /
    • 2011
  • 본 논문에서는 다양한 변조 신호에 대한 1.8 GHz 대역 VSWR을 구하는 방법을 제시하였다. 방향성 결합기를 이용하여 입사 전력과 반사 전력을 측정하였으며, 측정 회로 크기와 비용을 최소화하기 위해 SPDT(Single Pole Double Throw) 스위치를 사용하여 한 개의 검파기와 한 개의 AD(Analog to Digital) 변환기로 회로 구현이 가능하게 되었다. MCU(Micro Control Unit)를 이용하여 전압 반사 계수와 VSWR을 계산하였으며, 다양한 변조 신호에 대한 측정오차를 줄이고 MCU의 처리 시간 및 부하를 최소화하기 위해, 간단한 버블정렬 알고리즘을 적용하여 비적용한 경우보다 0.2의 VSWR 오차를 개선할 수 있었다.

이단으로 구성된 CMOS 전력증폭기 설계 (Design of Two-Stage CMOS Power Amplifier)

  • 배종석;함정현;정혜련;임원섭;조수호;양영구
    • 한국전자파학회논문지
    • /
    • 제25권9호
    • /
    • pp.895-902
    • /
    • 2014
  • 본 논문에서는 CMOS $0.18-{\mu}m$ 공정을 이용하여 1.75 GHz 대역에서 동작하는 이단으로 구성된 CMOS 전력증폭기를 설계하였다. 무선통신시스템에 적합한 전력증폭기 설계를 위하여 ADS 모의실험을 통하여 전력이득, 출력 전력, 효율을 각각 28 dB, 27 dBm, 45 %로 설계를 하였다. 실제 제작된 전력증폭기의 성능은 전력 이득, 출력 전력, 효율은 각각 22.9 dB, 24.8 dBm, 41.3 %로 특성을 나타냈으며, 변조된 LTE(Long-Term Evolution) 신호에 대하여 인접 채널 누설비(ACLR)가 -30 dBc 이하를 만족하며, 전력 이득, 출력 전력, 효율이 각각 22.6 dB, 23.1 dBm, 35.1 %의 특성을 나타냈다.

질화갈륨 소자를 이용한 DPD용 Amplifier Pallet 개발 (Design of Amplifier Pallet for DPD Using Gallium Nitride Device)

  • 오성민;박정훈;조삼열;이재훈;임종식
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2010년도 추계학술발표논문집 1부
    • /
    • pp.76-79
    • /
    • 2010
  • 본 논문에서는 고 효율 및 고 출력 특성을 가지는 질화갈륨(GaN) 소자를 이용하여 WiMAX 및 LTE System에 사용될 수 있는 DPD용 Pallet Amplifier를 제작하였다. 제작된 Pallet Amplifier는 Pre-drive로써 저 전류의 MMIC를 채택하고, Drive 단과 Main 단에 15W 급과 30W 급의 질화갈륨 소자를 사용 하였으며, 추가적인 효율 개선을 위해 PCB상에 Doherty Structure를 적용함으로써 보다 높은 효율을 구현하였다. 제작된 Pallet Amplifier는 음 전원 Bias 제어 회로, 온도에 따른 Gain 보상회로, Sequence 회로 및 Main 전원 Drop에 따른 보호 회로를 구현하였다. WiMAX Signal을 이용한 Modulation Power 10Watt Test에서 약 36.8~38.3%의 Pallet 효율과 DPD Solution인 TI GC5325SEK DPD Board 사용 시 ACLR은 약 46dBc 이상을 가지는 것으로 측정되었다. 본 논문에서 제작된 Pallet Amplifier는 Upper Band와 Lower Band로 나누어 제작되었던 기존 Pallet Amplifier와 달리 하나의 Pallet Amplifier로 2496~2690MHz에서 모두 사용하면서 종전에 사용되고 있는 Pallet Amplifier에 비해 Size가 최소 10% 이상 축소되어 효율 및 크기 면에서 종전 Pallet Amplifier보다 큰 이점을 갖는다.

  • PDF

5세대 이동통신을 위한 MMB 시스템 및 채널 모델 (MMB System and Channel Model for 5th Generation Mobile Communication)

  • 문상미;김보라;사란쉬말리크;김지형;이문식;김대진;황인태
    • 전자공학회논문지
    • /
    • 제51권8호
    • /
    • pp.3-10
    • /
    • 2014
  • 최근 폭증하는 모바일 데이터 트래픽을 수용하기 위하여 밀리미터파 (mmWave)가 큰 관심을 받고 있으며, 4 세대 LTE-A(Long Term Evolution-Advanced) 표준을 기반으로 MMB (Millimeter Mobile Broadband) 시스템의 필요성이 대두되고 있다. 현재 mmWave 통신 채널에 대한 많은 연구가 이루어지고 있으며, MMB 채널 환경에 대한 성능 분석 또한 관심의 대상이다. 본 논문에서는 5세대 이동통신을 위한 MMB 시스템을 설계하고 mmWave의 전파 특성 분석을 통한 채널 모델을 제안한다. 또한 MMB 시스템의 28 GHz 대역에서 MMB 채널 환경에 대한 성능을 비교 분석한다.

다중계수 방식을 적용한 밀리미터파 대역용 전력증폭기의 사전왜곡기 설계 및 비선형성 보상 성능 평가 (Design of a Predistorter with Multiple Coefficient Sets for the Millimeter-Wave Power Amplifier and Nonlinearity Elimination Performance Evaluation)

  • 육준형;성원진
    • 한국전자파학회논문지
    • /
    • 제26권8호
    • /
    • pp.740-747
    • /
    • 2015
  • 최근 밀리미터파 대역을 활용하는 이동통신시스템이 제안되고 있으며, 60 GHz 대역 전력증폭기로 인해 발생하는 비선형성을 효율적으로 보상하기 위한 방법의 중요성이 증가하고 있다. 본 논문에서는 전력증폭기의 비선형성이 상대적으로 작은 구간과 큰 구간으로 구분하여 계수를 사용하는 다중계수 사전왜곡기 구조를 제안하고, 이를 60 GHz 대역 고출력 전력증폭기 FMM5715X에 적용하여 LTE 신호의 선형성 보상 성능을 평가하였다. 하드웨어 테스트베드를 활용한 성능평가를 통해, 기존 방식 대비 제안 방식은 ACLR(Adjacent Channel Leakage Ratio) 측면에서 최대 6 dB 개선됨을 보인다.