• Journal of Microbiology and Biotechnology
• /
• 제20권12호
• /
• pp.1624-1629
• /
• 2010

Bacterial cell-to-cell communication, termed quorum sensing (QS), leads to coordinated group behavior in a cell-density-dependent fashion and controls a variety of physiological processes including virulence gene expression. The repressor of the lsr operon, LsrR, is the only known regulator of LuxS/AI-2-mediated QS in Salmonella. Although lack of lsrR did not result in noticeable differences in Salmonella survival, the down-regulation of QS as a result of lsrR overexpression decreased Salmonella survival within macrophages. We found that impaired growth of Salmonella overexpressing lsrR within macrophages was due largely to its hypersensitivity to NADPH-dependent oxidative stress. This, in turn, was a result of decreased expression of genes involved in the oxidative stress response, such as sodA, sodCI, and sodCII, when lsrR was overexpressed. These results suggest that down-regulation of QS by excess LsrR can lower Salmonella virulence by hampering Salmonella evasion from oxidative killing within macrophages.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.61-68
• /
• 2019

Only the power is converted from AC to DC, in accordance with IEC 60587 based test method, in order to develop the LSR(Liquid Silicone Rubber) insulator material for HVDC, the experiment of Inclined Plate Tracking and Erosion Resistance was conducted. A contaminant (2.5 mS/cm: ammonium chloride) was applied at a rate of 0.3 ml/min and a voltage of ${\pm}3.5kV$, and was evaluated on the basis of 60 mA/2s. The samples were prepared by dispersing LSR/Nano silica_25wt% Composites in LSR. The erosion phenomena of surface discharge and tracking due to DC polarity and negative polarity were measured by image, leakage current maximum and thermal camera. The thermal imaging camera measured the surface temperature generated by the joule heat of the leakage current due to the drying discharge and the conductive current. After the measurement, the tracking and erosion mechanisms were evaluated for erosion weight, erosion depth and erosion length. Positive and negative polarity of LSR/Nano Silica_25wt% composite Tracking and erosion results show that positive polarity is more severe than negative polarity.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.27-32
• /
• 2023

Liquid silicon rubber (LSR) has fine thermal compatibility and is widely used in various fields such as medical care and automobiles because it is easy to implement products with good fluidity. With the recent development of flexible sensors, the focus has been on manufacturing conductive elastomers, such as silicone as elastic materials, and carbon black, CNT, and graphene are mainly used as nanomaterials that impart conductive phases. In this study, mechanical behavior and curing behavior were measured and analyzed to manufacture a CB-LSR complex by adding Carbon Black to LSR and to identify properties. As a result of the compression test, the elastic modulus tended to increase as carbon black was added. When the swelling test and the compression set test were conducted, the swelling rate tended to decrease as the content of carbon black increased, and the compression set tended to increase. In addition, DSC measurements showed that the total amount of reaction heat increased slightly as the carbon black content increased. It is considered that carbon black was involved in the crosslinking of LSR to increase the crosslinking density and have a positive effect on oil resistance reinforcement.

• Journal of Korean Neurosurgical Society
• /
• 제52권4호
• /
• pp.372-376
• /
• 2012

Objective : The purpose of this large prospective study is to assess the association between the disappearance of the lateral spread response (LSR) before and after microvascular decompression (MVD) and clinical long term results over two years following hemifacial spasm (HFS) treatment. Methods : Continuous intra-operative monitoring during MVD was performed in 244 consecutive patients with HFS. Patients with persistent LSR after decompression (n=22, 9.0%), without LSR from the start of the surgery (n=4, 1.7%), and with re-operation (n=15, 6.1%) and follow-up loss (n=4, 1.7%) were excluded. For the statistical analysis, patients were categorized into two groups according to the disappearance of their LSR before or after MVD. Results : Intra-operatively, the LSR was checked during facial electromyogram monitoring in 199 (81.5%) of the 244 patients. The mean follow-up duration was $40.9{\pm}6.9$ months (range 25-51 months) in all the patients. Among them, the LSR disappeared after the decompression (Group A) in 128 (64.3%) patients; but in the remaining 71 (35.6%) patients, the LSR disappeared before the decompression (Group B). In the post-operative follow-up visits over more than one year, there were significant differences between the clinical outcomes of the two groups (p<0.05). Conclusion : It was observed that the long-term clinical outcomes of the intra-operative LSR disappearance before and after MVD were correlated. Thus, this factor may be considered a prognostic factor of HFS after MVD.

• Environmental Engineering Research
• /
• 제22권4호
• /
• pp.339-346
• /
• 2017

The objective of this study is the evaluation of the performance of a large-scale respirometer (LSR) of 17.7 L in the determination of the methane generation rate constant (k) values. To achieve this objective, a comparison between anaerobic (GB21) and LSR tests was conducted. The data were modeled using a linear function, and the resulting correlation coefficient ($R^2$) of the linear regression is 0.91. This result shows that despite the aerobic conditions, the biodegradability values that were obtained from the LSR test produced results that are similar to those from the GB21 test. In this respect, the LSR test can be an indicator of the anaerobic biodegradability for landfill waste. In addition, the results show the high repeatability of the tests with an average coefficient of variance (CV) that is lower than 10%; furthermore, the CV for the LSR is lower than that of the GB21, which indicates that the LSR-test method could provide a better representation of waste samples. Therefore, the LSR method allows for both the prediction of the long-term biodegradation potential in a shorter length of time and the reduction of the sampling errors that are caused by the heterogeneity of waste samples. The k values are $0.156y^{-1}$ and $0.127y^{-1}$ for the cumulative biogas production (GB21) and the cumulative oxygen uptake for the LSR, respectively.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.206-212
• /
• 2014

Liquid silicone rubber (LSR) has been widely used in automotive, electrical, and medical components. Thus, research on the use of LSR in the injection molding process is required to obtain high-quality and high-performance products. In this study, a mold was fabricated to examine the effects of the process parameters on the molding and mechanical properties of LSR parts. A computer-aided engineering analysis was used to optimize the air vent depth and curing temperature to decrease the flash at the air vents caused by the low viscosity of LSR. Temperature and pressure sensors were mounted in the mold to determine the effects of the process parameters on the temperature and pressure in the cavity. The tensile strength of the LSR parts was also examined in relation to the process parameters.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.232-235
• /
• 2002

Recently developed liquid silicone rubber (LSR) can be cured by platinum catalyzed additional hydrosilylation mechanism and has the advantage of no byproduct compared to traditional millable peroxide curing silicone rubber. We investigated the characteristics of dielectric breakdown of silicone rubber and adhesion properties between semi-conductive LSR and insulating LSR for high voltage application of pre-molded joint (PMJ). In order to understand the dielectric breakdown characteristics, we used the sheet samples and the paired type rogowski insert electrode system. The breakdown strength and adhesion strength of LSR (E-3) were superior to those of several silicone rubbers. Adhesion strength could be improved by curing at high temperature without post-curing process or enhanced by post-curing process. When LSR (E-3) was cured at $(150^{\circ}C{\times}10min$ semi-conductive )${\times}$ ($175^{\circ}C{\times}10min$ insulation), it showed the high breakdown strength with low standard deviation, and good adhesion strength. In this results, we could apply this process to the fabrication of PMJ without post-curing.

• 한국약용작물학회지
• /
• 제20권5호
• /
• pp.345-352
• /
• 2012

This experiment was conducted to verify whether one time feeding of Lythrum salicaria root crude extract (LSR extract) exhibits liver protecting activities in acutely ethanol administrated rat. Experiment groups were composed of normal, negative control (alcohol control), 2 positive control (Hovenia dulcis extract 900 mg/kg and milk thisle 100 mg/kg), betulinic acid (20 mg/kg), a compound separated from LSR, and 3 LSR (100, 300, 900 mg/kg) groups. LSR treated groups showed decrease (p < 0.05) in serum triglyceride by dose-dependent manner. The content of serum albumin and the activity of ADH and ALDH in LSR extract fed rats were increased (p < 0.05) dependently on the administration amounts. Our study indicated that one time supplement of LSR downregulates oxidative stress and shows liver protective activity in the acute alcohol-fed rats.

• Design & Manufacturing
• /
• 제17권1호
• /
• pp.1-5
• /
• 2023

In multi-material injection molding, since two or more materials with different process conditions are used, it is essential to maximize process efficiency by operating the cooling or heating system to a minimum. In this study, Liquid silicone rubber (LSR) that can be cured at a low temperature suitable for the multi-material injection molding was selected and the cure behavior according to the process conditions was analyzed through differential scanning calorimetry (DSC). Dynamic measurement results of DSC with different heating rate were obtained, and through this, the total heat of reaction when the LSR was completely cured was calculated. Isothermal measurement results of DSC were derived for 60 minutes at each temperature from 80 ℃ to 110 ℃ at 10 ℃ intervals, and the final degree of cure at each temperature was calculated based on the total heat of reaction identified from the Dynamic DSC measurement results. As the result, it was found that when the temperature is lowered, the curing start time and the time required for the curing reaction increase, but at a temperature of 90 ℃ or higher, LSR can secure a degree of cure of 80% or more. However, at 80 ℃., it was found that not only had a relatively low degree of curing of about 60%, but also significantly increased the curing start time. In addition, in the case of 110 ℃, the parameters were derived from experimental result using the Kamal kinetic model.

• 대한전자공학회논문지TC
• /
• 제38권12호
• /
• pp.29-38
• /
• 2001

최근 인터넷 사용자와 인터넷을 통한 다양한 서비스들의 증가로 인한 확장성의 문제점을 해결하기 위하여 IETF(Internet Engineering Task Force)는 새로운 스위칭 기술인 MPLS(Multi-Protocol Label Switching) 기술을 소개하였다. 본 논문에서는 ATM 기반 MPLS망에서 라우터의 레이블 공간을 효율적으로 사용하여 망의 확장성을 높이기 위한 방안인 레이블 통합 기능이 탑재된 LSR(Label Switching Router)을 구현한다. 차등서비스(Differentiated Service)를 제공함에 있어서 레이블 통합 기능을 수행할 수 있는 적합한 구조를 제안하며, 망 폭주 발생 가능성이 있을 시 EPD(Early Packet Discard) 알고리즘을 통한 적응적 폭주 제어를 행함으로써 네트워크 자원의 낭비를 막고, VC-merge와 Non VC-merge 기법을 시뮬레이션을 통해 각각 비교 분석하였다. 제안한 스위치를 VHDL 모델링을 통하여 설계하고, 삼성 $0.5{\mu}m$ SOG 공정을 이용하여 칩을 제작하였다.