• Journal of computational fluids engineering
• /
• v.12 no.4
• /
• pp.14-19
• /
• 2007

We present a direct numerical simulation technique and some preliminary results of the capillary spreading of a droplet containing particles on the solid substrate. We used the level-set method with the continuous surface stress for description of droplet spreading with interfacial tension and employed the discontinuous Galerkin method for the stabilization of the interface advection equation. The distributed Lagrangian-multipliers method has been combined for the implicit treatment of rigid particles. We investigated the droplet spreading by the capillary force and discussed effects of the presence of particles on the spreading behavior. It has been observed that a particulate drop spreads less than the pure liquid drop. The amount of spread of a particulate drop has been found smaller than that of the liquid with effectively the same viscosity as the particulate drop.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.281-287
• /
• 2011

The stationary discontinuous armatures that are used in permanent magnet linear synchronous motors (PM-LSMs) have been proposed as a driving source for transportation systems. However, the stationary discontinuous armature PM-LSM contains the outlet edges which always exist as a result of the discontinuous arrangement of the armature. For this reason, the high alteration of the outlet edge cogging force produced between the armature's core and the mover's permanent magnet when a mover passes the boundary between the armature's installation part and non-installation part has been indicated as a problem. Therefore, we have examined the outlet edge cogging force by installing the auxiliary teeth at the armature's outlet edge in order to minimize the outlet edge cogging force generated when the armature is arranged discontinuously. Moreover, we obtained the calculation by analyzing the shape of the auxiliary teeth in which the outlet edge cogging force is minimized the most.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.288-293
• /
• 2011

Generally, the discontinuous armature permanent magnet linear synchronous motor (PM-LSM) is composed by the stator block (accelerator, re-accelerator, and decelerator) and the free running section. However, the stationary discontinuous armature design involves the velocity variation of the mover during drive when the armature's non-installation part changes over to installation part as a result of the outlet edge of the armature. Therefore, we considered deforming the shape of the outlet edge at the armature and apply skew on the permanent magnet by displacing the two magnet segments of each pole. This paper presents the results of a three-dimensional (3-D) numerical analysis with a finite element method (FEM) of the force exerted by the outlet edge.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.984-986
• /
• 1993

In this paper, We have simulated and measured the characteristics of the static thrust of 2-phase PM type Linear Stepping Motor(LSM). And, the 2-phase PM type Linear Stepping Motor is simulated using 2-Dimensional finite element method. For calculating force, Maxwell stress tensor method is applied.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1356-1358
• /
• 2003

In the paper, a method making use of the characteristics of Dyad Green Function (DGF) and Fluctuation-Dissipation Theorem to get the brightness temperature of layered medium is introduced. Based on the approach and the measured data of multi-channel radiometer and Least Square Method (LSM), the thickness of lunar soil can be retrieved. These methods are significant to study on materials on lunar surface.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.78-80
• /
• 2001

This paper deals with a comparison between the secondary Halbach array and conventional array of permanent magnets(PMs) in air-core type linear synchronous motor(LSM). Two types of PMLSM are analyzed and compared, with reference to the following parameters as variables: magnetic field, thrust and back emf.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.167-174
• /
• 1998

This paper presents an unoccluded cylindrical object pose measurement using a slit beam laser in which a robot recognizes all of the unoccluded objects from the top of jumbled objects, and picks them up one by one. The elliptical equation parameters of a projected curve edge on a slice are calculated using LSM. The coefficients of standard elliptical equation are compared with these parameters to estimate the object pose. The hamming distances between the estimated coordinates and the calculated ones are extracted as measures to evaluate a local constraint and a smoothing surface curvature. The edges between slices are linked using error function based on the edge types and the hamming distances. The linked edges on slices are compared with the model object's length to recognize the unoccluded object. This proposed method may provide a solution to the automation of part handling in manufacturing environments such as punch press operation or part assembly.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.646-648
• /
• 2001

최근의 침입이나 공격들은 광범위한 망의 이용과 긴 시간을 두고 공격을 행하는 추세로 발전하고 있다. 이러한 공격들에 대한 탐지 및 대응을 위하여 침입탐지 시스템들은 시스템에 걸쳐 있는 정보의 공유, 침입이나 공격에 적극 대응하기 위한 자원의 이용 등의 상호협력이 요구되고 있다. 본 논문에서는 시스템에서 기록하는 많은 종류의 로그 정보를 침입 탐지에 이용할 수 있는 정보만을 추출하고 분석하여 저장함으로써, 침입 탐지 시스템이 이용할 수 있게 하고, 다른 시스템에서 정보를 필요로 할 때 제공할 수 있으며, 또한 침입이라 간주되어지는 행위에 대하여 대응하기 위한 추적 및 정보 수집 그리고 접속 거부 등을 행하는 Agent 시스템의 설계 및 개발을 목적으로 한다. 이를 위해 리눅스 시스템 기반 하에서 로그를 기록하는 SYSLOG, 발생한 시스템 콜 정보를 기록하는 LSM, 망에서 시스템으로 들어오는 패킷을 분석하는 Pcap Library를 이용한 로그 등을 통합하는 과정을 설명하고, 침입탐지 시스템에 의해서 침입이라 판단되었을 경우, DART Agent가 그 경로를 역추적하고 여러 시스템에 걸쳐 있는 정보들을 수집하는 과정, 고리고 공격에 대한 대응을 하는 과정을 설명한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.657-659
• /
• 2019

본 논문에서는 피부 이미지에서 건선 병변만을 가장 효과적으로 분할 할 수 있는 분할기법 선별을 목표로 한다. Interactive graph cuts (IGC)와 Level set method (LSM)를 사용하여 건선 영역을 분할한 후 Jaccard Index (JI)와 Dice Similarity Coefficient (DSC)을 사용하여 건선 영역에 효과적인 분할 방법을 제안한다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.98-103
• /
• 1997

원전 증기 발생기 재료로 사용되는 Alloy 600의 내부식성 향상을 위하여 레이저 범을 이용한 레이저 표면합금화(Laser Surface Alloying, LSA) 방법을 이용, 표면에 약 200$\mu\textrm{m}$ 두께의 합금층을 형성시켰다. 첨가한 원소는 크롬 또는 크롬과 니켈의 혼합체를 사용하였으며 첨가법으로는 도금과 용사를 이용하였다. 용사법으로 만든 LSA 시편의 특성과 문제점에 대해 고찰하고 이러한 문제점을 해결하는 방법으로 크롬 도금법을 택하였다. 이들 결과를 레이저 처리를 하지 않은 시편들과 비교하여 부식 거동을 분석하였다. 분석 결과 LSA 시편의 경우 As-received 시편, 레이저 표면 용융(LSM) 들과 비교해 아주 우수한 내부식성을 가졌으며 입계 내부식성도 크게 증가하였다. 이는 크롬 첨가로 인해 크롬의 농도가 많아져 부동태 피막의 형성이 쉬워졌기 때문으로 해석되었다.