• Journal of Broadcast Engineering
• /
• v.9 no.3
• /
• pp.246-256
• /
• 2004

In this paper, we proposed a new lossless image compression algorithm. Lossless image compression has been used in the field that requires the accuracy and precision. Thus, application areas using medical unaging, prepress unaging, image archival systems, precious artworks to be preserved, and remotely sensed images require lossless compression. The compression ratio from lossless image compression has not been satisfactory, thus far. So, new method of lossless image compression has been investigated to get better compression efficiency. We have compared the compression results with the most typical compression methods such as CALIC and JPEG-LS. CALIC has shown the best compression-ratio among the existing lossless coding methods at the cost of the extensive complexity by three pass algorithm. On the other hand, JPEG-LS's compression-ratio is not higher than CALIC, but was adopted as an international standard of ISO because of the low complexity and fast coding process. In the proposed method, we adopted an adaptive predictor that can exploit the characteristics of individual images, and an adaptive arithmetic coding with multiple probability models. As a result, the proposed algorithm showed 5％ improvement in compression efficiency in comparison with JPEG-LS and showed comparable compression ratio with CALIC.

• Explosives and Blasting
• /
• v.38 no.3
• /
• pp.15-29
• /
• 2020

In this paper the Hoek-Brown (HB) failure criterion is integrated into the Holmquist-Johnson-Cook (HJC) concrete material model to reflect the inherent characteristics of field rock masses in LS-DYNA blast modeling. This is intended to emphasize the distinctive characteristics of field rock masses that usually have many geological discontinuities. The replacement is made only for the static strength part of the HJC material model by using a statistical curve fitting technique, and its procedure is described in detail. An example is also given to illustrate the use of the obtained HJC material model. Computation is performed for a plane strain model of a single-hole blasting on a field limestone by using the combination of the fluid-structure interaction (FSI) technique and the multi-material arbitrary Lagrangian Eulerian (MMALE) method in LS-DYNA.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.277-279
• /
• 2004

In this paper, we propose an channel estimation method for Multi-Input Multi-Output-Orthogonal frequency Division Multiplexing (MIMO-OFDM). The proposed method estimates uniquely all channel frequency responses needed in space-frequency block coded OFDM systems using "comb-type" pilot symbols. To reduce the computational complexity of the proposed method, least square(LS) and linear minimum mean square error(LMMSE) are used in the frequency-domain. The performance of the proposed approach is evaluated by computer simulation for rayleigh fading channel.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.2
• /
• pp.461-471
• /
• 2017

In this paper we propose a feature selection method identifying important features in the semivarying coefficient model. One important issue in semivarying coefficient model is how to estimate the parametric and nonparametric components. Another issue is how to identify important features in the varying and the constant effects. We propose a feature selection method able to address this issue using generalized cross validation functions of the varying coefficient least squares support vector regression (LS-SVR) and the linear LS-SVR. Numerical studies indicate that the proposed method is quite effective in identifying important features in the varying and the constant effects in the semivarying coefficient model.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.1-9
• /
• 2018

The multiple-choice multidimensional knapsack problem (MMKP) is a variant of the well known 0-1 knapsack problem, which is known as an NP-hard problem. This paper proposes a method for solving the MMKP using the integer programming-based local search (IPbLS). IPbLS is a kind of a local search and uses integer programming to generate a neighbor solution. The most important thing in IPbLS is the way to select items participating in the next integer programming step. In this paper, three ways to select items are introduced and compared on 37 well-known benchmark data instances. Experimental results shows that the method using linear programming is the best for the MMKP. It also shows that the proposed method can find the equal or better solutions than the best known solutions in 23 data instances, and the new better solutions in 13 instances.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.2
• /
• pp.337-343
• /
• 2003

In this paper we present the prediction interval estimation method using bootstrap method for least squares support vector machine(LS-SVM) regression, which allows us to perform even nonlinear regression by constructing a linear regression function in a high dimensional feature space. The bootstrap method is applied to generate the bootstrap sample for estimation of the covariance of the regression parameters consisting of the optimal bias and Lagrange multipliers. Experimental results are then presented which indicate the performance of this algorithm.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.51-52
• /
• 2010

In order to simplify the offline identification of induction motor parameters, a method based on optimization using a Tabu Search algorithm is proposed. The Tabu Search algorithm is used to minimize the error between the actual data and an estimated model. The robustness of the method is shown by identifying parameters of the induction motor in three different cases. The simulation results show that the method successfully estimates the motor parameters.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.10
• /
• pp.1059-1066
• /
• 2011

This paper makes a close inquiry into ill-conditioning that may be occurred in wireless localization of the sensor nodes based on network signals in the wireless sensor network and provides the clue for solving the problem. In order to estimate the location of a node based on the range information calculated using the signal propagation time, LS (Least Squares) method is usually used. The LS method estimates the solution that makes the squared estimation error minimal. When a nonlinear function is used for the wireless localization, ILS (Iterative Least Squares) method is used. The ILS method process the LS method iteratively after linearizing the nonlinear function at the initial nominal point. This method, however, has a problem that the final solution may converge into a LM (Local Minimum) instead of a GM (Global Minimum) according to the deployment of the fixed nodes and the initial nominal point. The conditions that cause the problem are explained and an adaptive method is presented to solve it, in this paper. It can be expected that the stable location solution can be provided in implementation of the wireless localization methods based on the results of this paper.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.9
• /
• pp.78-84
• /
• 2022

An air circuit breaker (ACB) is an electrical protection device that interrupts abnormal fault currents that result from overloads or short circuits in a low-voltage power distribution line. The ACB consists of a main circuit part for current flow, mechanism part for the opening and closing operation of movable conductors, and arc-extinguishing part for arc extinction during the breaking operation. The driving mechanism of the ACB is a spring energy charging type. The faster the contact opening speed of the movable conductors during the opening process, the better the breaking performance. However, there is a disadvantage that the durability of mechanism decreases in inverse proportion to the use of a spring capable of accumulating high energy to configure the breaking speed faster. Therefore, to simultaneously satisfy the breaking performance and mechanical endurance of the ACB, its driving mechanism must be optimized. In this study, a dynamic model of the ACB was developed using the MDO(Mechanism Dynamics Option) module of CREO, which is widely used in multibody dynamics analysis. To improve the opening velocity, the Taguchi design method was applied to optimize the design parameters of an ACB with many linkages. In addition, to evaluate the improvement in the operating characteristics, the simulation and experimental results were compared with the MDO model and improved prototype sample, respectively.

• Journal of Plant Biotechnology
• /
• v.37 no.4
• /
• pp.505-510
• /
• 2010

This study was conducted to refine a micropropagation method of water hyacinth (Eichhornia crassipes) in vitro. When young shoots were cultured on media with various concentrations of BA or TDZ alone, LS medium containing $5.0\;mgl^{-1}$ BA was found favorable for shoot proliferation from young shoots with a mean of 4.2 shoots. Using BA together with IAA, more shoots were obtained on LS medium containing $5.0\;mgl^{-1}$ BA and $1.0\;mgl^{-1}$ IAA with a mean of 5.7 shoots. In liquid medium, number of shoots and fresh weight per explant increased significantly. The best shoot proliferation and increasing of fresh weight were achieved on LS liquid medium containing $5.0\;mgl^{-1}$ BA and $1.0\;mgl^{-1}$ IAA with 6.9 shoots and more than 4,000 mg fresh weight. Of the different concentrations of LS salt, double strength of LS medium provided the highest shoot proliferation with 7.3 shoots, and fresh weight with 5,539 mg per explant. Shoot proliferation on LS medium containing $50\;gl^{-1}$ sucrose had better results with 8.7 shoots and 5,979 mg per explant in fresh weight than other conditions. In conclusion, the optimal level for shoot proliferation and biomass increase of water hyacinth was attained with the application of the double strength of LS medium containing $5.0\;mgl^{-1}$ BA, $1.0\;mgl^{-1}$ IAA and $50\;gl^{-1}$ sucrose.