Browse > Article
http://dx.doi.org/10.14775/ksmpe.2022.21.09.078

An Optimal Design of a Driving Mechanism for Air Circuit Breaker using Taguchi Design of Experiments  

Park, Woo-Jin (Electrotechnology R&D Center, LS ELECTRIC Co.,Ltd.)
Park, Yong-ik (Electrotechnology R&D Center, LS ELECTRIC Co.,Ltd.)
Ahn, Kil-Young (Electrotechnology R&D Center, LS ELECTRIC Co.,Ltd.)
Cho, Hae-Yong (Depart of Mechanical Eng. Chungbuk National University)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.21, no.9, 2022 , pp. 78-84 More about this Journal
Abstract
An air circuit breaker (ACB) is an electrical protection device that interrupts abnormal fault currents that result from overloads or short circuits in a low-voltage power distribution line. The ACB consists of a main circuit part for current flow, mechanism part for the opening and closing operation of movable conductors, and arc-extinguishing part for arc extinction during the breaking operation. The driving mechanism of the ACB is a spring energy charging type. The faster the contact opening speed of the movable conductors during the opening process, the better the breaking performance. However, there is a disadvantage that the durability of mechanism decreases in inverse proportion to the use of a spring capable of accumulating high energy to configure the breaking speed faster. Therefore, to simultaneously satisfy the breaking performance and mechanical endurance of the ACB, its driving mechanism must be optimized. In this study, a dynamic model of the ACB was developed using the MDO(Mechanism Dynamics Option) module of CREO, which is widely used in multibody dynamics analysis. To improve the opening velocity, the Taguchi design method was applied to optimize the design parameters of an ACB with many linkages. In addition, to evaluate the improvement in the operating characteristics, the simulation and experimental results were compared with the MDO model and improved prototype sample, respectively.
Keywords
Optimization; Taguchi Method; Air Circuit Breaker;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Ahn, K. Y., Park, S. H., Lee, B. Y., Oh, I. S., "Improvement on the Fatigue-proof Characteristics of Link Members Under an Impact Loadings by a Spring-Actuated Mechanism," Journal of the Korean Society for Precision Engineering, Vol. 20, No. 4, pp. 158-164, 2003.
2 Cho, J, Y., Ahn, K. Y., Kim, S. T., Yang, H. I. and Kim, K. J., "Dynamic Responses Optimization of Vacuum Circuit Breaker Using Taguchi Method," Journal of the Korean Society of Mechanical Engineering, Vol. 3, No. 2, pp. 141-148, 2015
3 Root, R. R., "The Circuit Breaker-A Practical Example in Engineering Optimization," Mechanism and Machine Theory, Vol. 18, No. 3, pp. 229-235, 1983   DOI
4 Cheon, K. M., An, J. H., Hur, J. W., "Design of Gaskets for Hydrogen Fuel Cells Using Taguchi Method," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 21, No. 1, pp. 66-72, 2022   DOI
5 Lim, Y. B., "Selection of Signal-to-Noise Ratio through Simple Data Analysis," Journal of the Korean Society of Quality Management, Vol. 22, No. 4, pp. 1-12, 1994.
6 Susol Air Circuit Breaker Catalogue, LS ELECTRIC; Structure of ACB, pp17, 2011.
7 Park, S. H., Lee, B. Y., Kim, W. J., Ahn, K. Y.. Oh, I. S., "Improvement on the Fatigue-proof Characteristics of the Link Member Under an Impact Loadings in a Spring-Actuated Mechanism," Journal of the Korean Society of Atomotive Engneers, 02-0009, pp. 19-25, 2002.
8 Flurscheim, C. H., "Power Cirecuit Breaker Theory and Design," Short Run Press Ltd., pp. 68-127, 1975.
9 Van Sickle, R. C. and Goodman, T. P., "Spring Actuated Linkage Analysis to Increase Speed," Product Engineering, Vol. 24, pp. 152-157, 1953.
10 Barkan, P., "Dynamics of High-Capacity Outdoor Oil Circuit Breaker," AIEE Transactios, Vol. 74, Part III, pp. 671-676, 1955.
11 International Electrotechnical Commission. IEC 60947-2; Low-voltage switchgear and controlgear. Part 2; Circuit Breakers, pp.256, 2016
12 International Electrotechnical Commission. IEC 60947-3; Low-voltage switchgear and controlgear. Part 3; Switches, disconnectors, switchdisconnectors and fuse-combination units, pp. 61, 2008/ADM2:2015