• 제어로봇시스템학회논문지
• /
• 제16권12호
• /
• pp.1201-1207
• /
• 2010

This paper shows to stabilize a balancing robot. We derive the dynamics of a balancing robot and design its controller using LQR method. For stabilizing balancing robot, we introduce a method to detect an angle using inertial sensors. In this study, we use a complementary filter to fuse signals by frequency response of gyroscope and accelerometer in order to measure the inclined angle of balancing robot. The filter coefficients are obtained by least square to minimize error in angle-detecting filter design. And then, after we derive a dynamics of balancing robot using Lagrange method, we linearize that dynamics for using LQR method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.429-434
• /
• 1998

The previously developed control design methodology, EALQR(Eigenstructure Assignment/LQR), has better performance than that of conventional LQR or eigen-structure assignment. But it has a constraint for the weigting matrix in LQR, that is the weighting matrix could be indefinite for high-order systems. In this paper, the effects of the indefinite weighting matrix in EALQR on the Sequency domain properties are analyzed. The robustness criterion and quantitative frequency domain properties are also presented. Finally, the frequency do-main properties of EALQR has been analyzed by applying to a flight control system design example.

• 한국항해학회지
• /
• 제23권3호
• /
• pp.35-44
• /
• 1999

This research aims to seek active control of ball-beam position stability by resorting to neural networks whose layers are given bias weights. The controller consists of an LQR (linear quadratic regulator) controller and a neural networks controller in parallel. The latter is used to improve the responses of the established LQR control system, especially when controlling the system with nonlinear factors or modelling errors. For the learning of this control system, the feedback-error learning algorithm is utilized here. While the neural networks controller learns repetitive trajectories on line, feedback errors are back-propagated through neural networks. Convergence is made when the neural networks controller reversely learns and controls the plant. The goals of teaming are to expand the working range of the adaptive control system and to bridge errors owing to nonlinearity by adjusting parameters against the external disturbances and change of the nonlinear plant. The motion equation of the ball-beam system is derived from Newton's law. As the system is strongly nonlinear, lots of researchers have depended on classical systems to control it. Its applications of position control are seen in planes, ships, automobiles and so on. However, the research based on artificial control is quite recent. The current paper compares and analyzes simulation results by way of the LQR controller and the neural network controller in order to prove the efficiency of the neural networks control algorithm against any nonlinear system.

• Structural Engineering and Mechanics
• /
• 제85권5호
• /
• pp.607-620
• /
• 2023

The classical optimal control (COC) method has been widely used for linear quadratic regulator (LQR) problems of structural control. However, the equation of motion of the structure is incorporated into the optimization model as the constraint condition for the LQR problem, which needs to be solved through the Riccati equation under certain assumptions. In this study, an explicit optimal control (EOC) method is proposed based on the explicit time-domain method (ETDM). By use of the explicit formulation of structural responses, the LQR problem with the constraint of equation of motion can be transformed into an unconstrained optimization problem, and therefore the control law can be derived directly without solving the Riccati equation. To further optimize the weighting parameters adopted in the control law using the gradient-based optimization algorithm, the sensitivities of structural responses and control forces with respect to the weighting parameters are derived analytically based on the explicit expressions of dynamic responses of the controlled structure. Two numerical examples are investigated to demonstrate the feasibility of the EOC method and the optimization scheme for weighting parameters involved in the control law.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1867-1870
• /
• 1997

Waypoint guidance is a technique used to steer an autonomous vehicle along a desired trajectory. In this paper, a waypoint guidance algorithm for horizontal plane is derived by combining a line following guidance law and a turning guidance law. The line following guidance is derived based on LQR while the turning guidance is designed using rendzvous problem. Through simulation, the proposed method shows a good performance.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.380-385
• /
• 1996

The genetic algorithm(GA) is applied to the design of the nuclear power control system. The reactor control system model is described in the LQR configuration. The LQR system order is increased to make the tracking system. The key parameters of the design are weighting matrices, and these are usually determined through numerous simulations in the conventional design. To determine the more objective and optimal weightings, the improved GA is applied. The results show that the weightings determined by the GA yield the better system responses than those obtained by tile conventional design method.

• 한국공간구조학회논문집
• /
• 제8권4호
• /
• pp.73-80
• /
• 2008

본 논문의 목적은, LQR 제어이득의 효율적 산정에 의한 지진하중을 받는 빌딩 구조물의 능동지진제어를 위하여 능동텐던 장치를 적용한 구조물의 지진응답제어를 위한 최적화 방법을 제시한 것이다. 텐던을 이용한 구조물 지진응답제어 문제의 정식화를 위해 Ricatti 폐회로 제어이론 및 위상보정에 의한 시간지연현상을 도입하였으며, 상태방정식의 해를 산정하기 위해 전달 행렬을 이용한 수치해석법을 이용 사다리꼴적분법에 의해 상태벡터의 해를 산정하였다. 성능지수의 최적화를 위해, 최소 가중행렬비를 설계변수로, IBC 2000의 허용층간변위 규정과 텐던의 최대제어력을 제약조건으로 하여, SUMT 기법에 의해 최적 해를 산정토록 최적제어 프로그램을 개발하였다. 8층 빌딩구조물에 대한 적용 예에서, 최적제어를 적용한 시스템이 비제어 시스템에 비해 층간제어효과가 우수하고, 일정 가중행렬비 적용 제어시스템에 비해 낮은 성능지수가 요구되었다.

• 한국항공우주학회지
• /
• 제39권6호
• /
• pp.505-516
• /
• 2011

통합유도조종(IGC, Integrated Guidance and Control)은 기존의 분리형 유도조종루프의 성능한계를 극복하기 위해 제안된 개념이다. 본 논문에서는 입사각제어가 가능한 새로운 형태의 IGC 기법을 제안하였다. 제안된 IGC는 자동조종성능과 유도성능을 동시에 얻기 위해 받음각, 피치각속도, 피치각, 시선각을 상태변수로 고려한다. 제안된 IGC의 제어특성을 고찰하기 위하여 비선형 상태방정식에 대한 가제어성 해석 및 평형점 해석을 수행 하였다. IGC 모델에 대한 제어기법으로는 LQR(Linear Quadratic Regulator)을 사용하였으며 LQR을 IGC에 적용하기 위한 방법을 상세하게 설명하였다. 수치 시뮬레이션을 통해 분리형 유도조종루프와 IGC의 성능을 비교하였다. 성능 비교 결과 IGC는 급격한 기동이 필요한 유도기하에 대하여 분리형 유도조종루프에 비해 우수한 유도성능을 보임을 확인하였다.

• Steel and Composite Structures
• /
• 제32권6호
• /
• pp.753-767
• /
• 2019

Vibration control in mechanical equipments is an important problem where unwanted vibrations are vanish or at least diminished. In this paper, free vibration active control of the porous sandwich piezoelectric polymeric nanocomposite microbeam with microsensor and microactuater layers are investigated. The aim of this research is to reduce amplitude of vibration in micro beam based on linear quadratic regulator (LQR). Modified couple stress theory (MCST) according to sinusoidal shear deformation theory is presented. The porous sandwich microbeam is rested on elastic foundation. The core and face sheet are made of porous and three-phase carbon nanotubes/resin/fiber nanocomposite materials. The equations of motion are extracted by Hamilton's principle and then Navier's type solution are employed for solving them. The governing equations of motion are written in space state form and linear quadratic regulator (LQR) is used for active control approach. The various parameters are conducted to investigate on the frequency response function (FRF) of the sandwich microbeam for vibration active control. The results indicate that the higher length scale to the thickness, the face sheet thickness to total thickness and the considering microsensor and microactutor significantly affect LQR and uncontrolled FRF. Also, the porosity coefficient increasing, Skempton coefficient and Winkler spring constant shift the frequency response to higher frequencies. The obtained results can be useful for micro-electro-mechanical (MEMS) and nano-electro-mechanical (NEMS) systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1766-1767
• /
• 2011

본 논문에서는 기존의 proportional-integral-derivative (PID) 제어기의 이득조정과정에서 linear quadratic regulator(LQR)을 이용하여 이득조정을 하는 방법을 제안한다. 제안된 제어기의 이득은 LQR의 수식으로 표현되어지며 Matlab/simulink을 이용한 모의실험을 통해 위치프로파일에 대한 위치추종오차의 성능이 평가되어진다.