• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.664-669
• /
• 1998

This research is concerned with the active vibration controller design for smart structures by a modified LQG controller. The smart structure is defined as the structure equipped with smart actuators and sensors. Various analog and digital control, techniques aimed for the piezoceramic sensors and actuators have been proposed for the active vibration control of smart structures. In this paper, the modified LQG controller is developed for the active vibration suppression of smart structures to implement the predefined decay rate on modal displacements. The proposed modified LQG controller proved its effectiveness by experiments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1144-1149
• /
• 2008

Converting technology has developed to print information for the decades. Recently, this technology (like gravure, gravure-offset) is rising as an alternative way for mass production of printed electronics such as RFID, solar cell. For the width of printing line is under 10 microns, registration error should be minimized less than several microns. Tension disturbance is main cause of registration error and this should be minimized before the substrate is transported into printing zone. With PI controller, it is possible to suppress the disturbance within 2% of operating tension. But register error appears more than 10 micron using PIcontroller considering noise. So LQG controller is needed as an alternative control method. In this paper, the comparision of PI and LQG controller in the converting machine including measured noise and tension disturbance is presented. It is shown that the LQG controller is more suitable for precision tension control in printed electronics.

• 조명전기설비학회논문지
• /
• 제16권6호
• /
• pp.30-39
• /
• 2002

본 논문에서는 전력동요 억제를 위한 TCSC의 강인한 LQG/LTR (Linear Quadratic Gaussian with Loop Transfer Recovery) 제어기 설계에 관한 연구를 하였다. LQG/LTR 제어기를 설계할 때 성능을 극대화하기 위해서는 여러 단계의 파라미터 조정을 하여야 한다. 이에 본 논문에서는 다 변수 LQG/LTR 안정화 제어기 선계를 체계적으로 할 수 있는 방법을 제안하였다. 설계된 제어기를 실제의 비선형 전력시스템에 적용함으로써 전력동요억제 효과를 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.483-487
• /
• 1986

The LQG/LTR method is applied to the real servomechanism with the unknown modeling error and system noise variance Q$_{2}$. The equivalent discretized LQG controller is implemented on the 16-bit microcomputer and the experimental results show the improved stability and the satisfactory performance when the noise variance Q$_{2}$ is increased infinitly.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.570-574
• /
• 1987

The robust servo controller is designed by the procedure of LQG/LTR method in the continuous-time domain. This design results is equivalently converted to the discrete-time suboptimal LQG in order to implement by the microcomputer system. The LTP, condition of the discrete-time LQG is analyzed and approved by the experiments against the uncertainty of real plant, the discretized LQG /LTR control shows the good robustness.

• 한국정밀공학회지
• /
• 제26권10호
• /
• pp.65-73
• /
• 2009

For mass production of printed electronics in roll-to-roll fashion, precision tension control is important to reduce register errors. Register error should be minimized within several to tens of microns for many electronic devices to be manufactured through printing technology. In order to achieve this goal, tension disturbance must be attenuated before printing process within a certain range. In this paper, a certain tension range which allows maintaining register error within 10 micron was defined with specific operating conditions. A LQG controller was proposed instead of the conventional PI controller for precision tension control using a multivariable feedback. A guideline to determine design parameters for calculating LQ gain was proposed. The proposed LQG controller was compared to both PI controller and LQ regulator with white noise by numerical simulations. Results showed that the proposed LQG controller was effective for attenuating tension disturbance with white noise.

• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.110-119
• /
• 1994

The Robust Controller for scan-loop is designed using LQG/LTR Methodology. The design and analysis of spiral, rosette and conical scan patterns are discussed. The perfermance and robustness of the LQG/LTR controller are analyzed through experiments and cpmpared with those of the P-controller. Especially to improve the scan performance at large look angle, the cage coil output is linearized using a binomial equation. It is demonstrated that the scan-loop system by the LQG/LTR control is very robust to phase uncertainties.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.66-69
• /
• 1989

In this paper, the LQG/LTR design method is applied of the third order linear time invariant plant model which is the SISO turret-gun servo-mechanism. The dynamic characteristics and the performance of the LQG/LTR controller are analyzed by the computer simulation, and compared with those of PID controller which has been already applied to the turret servomechanism under the sane design specifications.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.372-375
• /
• 1995

The LQG/LTR controller design procedure for ground alignment of inertial platform is accomplished. Due to the alignment system dynamics, LQG/LTR controller is proposed to overcome both singular problem and nonsquare problem. To show the effectiveness of this control system, computer simulation was performed under the assumption of random sway motion.

• 소음진동
• /
• 제11권1호
• /
• pp.49-56
• /
• 2001

In this paper, two plant models, of which one is newly developed and the other one is the conventional one, of the focus servo system of DVD drive are presented and a two-degree-of freedom controller consisted of Inverse dynamics feedforward and LQG/LTR feedback controller is designed. The newly developed plant model is used to design the feedforward controller and the conventional model is used for the design of feedback controller. The output of newly developed model is the displacement of objective lens and the output of conventional model is the focus error of the DVD focus servo system. The displacement of the objective lens is estimated by the dynamics model of the DVD focus servo system. The disturbance rejection performance of the two-degree-of freedom controller is compared with that of an LQG/LTR one.