• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.847-851
• /
• 1990

In this paper we present a method of reducing controller design problem from LQG/LTR approach to H.inf. optimization. The condition of the existance of the optimal solution is derived. In order to derive the controller equation for NMP plant we reduce the H.inf. LTR problem to Nehari's extension problem and derive the optimal controller equation which is best approximation for this problem. Furthermore, we show that the controller obtained by presented method guarantee the asymptotic LTR condition and stability of closed loop system.

• 제어로봇시스템학회논문지
• /
• 제8권9호
• /
• pp.757-763
• /
• 2002

A newly designed haptic interface enables an operator to control a remote robot precisely. It transmits position information to the remote robot and feeds back the interaction force from it. A control algorithm of haptic interface has been studied to improve the robustness and stability to uncertain dynamic environments with a proposed contact dynamic model that incorporates human hand dynamics. A simplified hybrid parallel robot dynamic model fur a 6 DOF haptic device was proposed to from a real time control system, which does not include nonlinear components. LQC/LTR scheme was adopted in this paper for the compensation of un-modeled dynamics. The recovery of the farce from the remote robot at the haptic interface was demonstrated through the experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.60.3-60
• /
• 2002

1. Introduction 2. The Localized Aerosol Hyperthermia 3. Hardware Development of a Heated Vapor Inhalator 4. Modeling of the Control System 5. The Design of LQG/LTR Controller 6. Conclusion

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.457-459
• /
• 1998

This paper presents a 3-DOF hovering flight controller for a model helicopter using the minimal order LQG/LTR technique. A model helicopter is an unstable multi-input multi-output nonlinear system strongly exposed to disturbances, so a robust multi-variable control theory should be applied to control it. The minimal order LQG/LTR technique which uses a reduced-order observer in the LTR procedure is used to design the controller. Performances for the 3-DOF hovering flight controller are evaluated through computer simulations.

• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.110-119
• /
• 1994

The Robust Controller for scan-loop is designed using LQG/LTR Methodology. The design and analysis of spiral, rosette and conical scan patterns are discussed. The perfermance and robustness of the LQG/LTR controller are analyzed through experiments and cpmpared with those of the P-controller. Especially to improve the scan performance at large look angle, the cage coil output is linearized using a binomial equation. It is demonstrated that the scan-loop system by the LQG/LTR control is very robust to phase uncertainties.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.121-124
• /
• 1989

In this thesis, a decomposed LQG/LTR controller is designed for an undersea vehicle. The modellig error which results from decomposition of the original model is considered to the design specification for maintaining the robust stability. The LQG/LTR controller designed with new specification is simulated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.324-327
• /
• 1996

This paper describes the robust controller design methods applied to the problem of an automatic system for tow-vehicle/trailer combinations. This study followed an inverse Linear Quadratic Regulator(LQR) approach which combines pole assignment methods with conventional LOR methods. It overcomes two concerns associated with these separate methods. It overcomes the robustness problems associated with pole placement methods and trial and error required in the application of the LQR problem. Moreover, a Kalman filter is used as the observer, but is modified by using the loop transfer recovery (LTR) technique with modified transmission zero assignment. The proposed inverse LQG,/LTR controllers enhances the forward motion stability and maneuverability of the combination vehicles. At high speeds, where the inherent yaw damping of the vehicle system decreases, the controller operates to maintain an adequate level of yaw damping. At backward moton, both 4WS (2WS tow-vehicle, 2WS trailer) and 6WS (4WS tow-vehicle, 2WS trailer) control laws are proposed by using inverse LQG/LTR method. To evaluate the stability and robustness of the proposed controllers, simulations for both forward and backward motion were conducted using a detailed nonlinear model. The proposed controllers are significantly more robust than the previous controllers and continues to operate effectively in spite of parameter perturbations that would cause previous controllers to enters limit cycles or to loose stability.

• Nuclear Engineering and Technology
• /
• 제27권5호
• /
• pp.730-742
• /
• 1995

증기발생기의 급수 및 수위조절 시스템과 관련하여 전체 시스템을 급수 서보시스템과 궤환제어기로 나누어 설계하였다. 급수 시스템의 설계에는 최적제어이론을 사용하였으며 시스템의 강인성을 위하여 다시 LTR 기법을 이용하였다. 중기발생기의 제어특성은 열수력학적인 이유에 의하여 출력에 따라 계속적으로 변하게 되므로 궤환제어기가 이러한 변화를 동적으로 반영할 수 있도록 하였다. 모든 설계는 연속시스템에서 이루어졌으며 적절한 샘플링 주기를 선정하여 디지탈화 하였다. 이같은 시스템을 이용하여 출력증가 및 감소의 두 가지에 대해 검토한 결과, 출력의 증가시에는 제어상수를 고정시키는 것이 바람직하나 출력의 감소시에는 시스템의 안정을 위하여 제어상수가 출력에 따라 동적으로 변화해야함을 알 수 있었다.

• 소음진동
• /
• 제3권4호
• /
• pp.383-394
• /
• 1993

An automotive suspension system generally behaves like a low frequency band-pass filter(0.5 - 10 Hz). Passengers are very sensitive to this frequency range in terms of ride quality and road holding ability. In this paper, a LQG/ LTR controller is suggested to improve the ride quality and road holding ability in the specified frequency rage. It has been found by numerical simulation that the ride quality and road holding ability can be improved in the frequency ranges of 0.5 - 3.0 Hz and 0.3 - 2.1 Hz respectively. In addition, a new approach using root locus to evaluate the stability robustness of the active suspension system is studied. It is shown that the stability robustness of the LQG/LTR controller designed in this paper is improved, compared to the passive system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.293-298
• /
• 1993

In ground vehicles, the increasing demand for safety and ride comfort which are trade-off relation, especially at high speeds, has led to the development od actively controlled suspensions. The LQG/LTR controller can be used to design a robust feedback control system that deals with disturbance rejection properties as well as insensitivity to modelling errors and sensor noise. And when the disturbance can not be measured but is limited within a certain frequency range, a bandpass feedback to eliminate the disturbance response can be used. In this paper, hybrid controller cosisted of bandpass feedback controller and LQG/LTR controller is applied to a quarter-car model moving on a randomly profiled road. The random road profile considered as colored noise is shaped from white noise by use of shaping filter. The performance of the hybrid control system is compared with that of an LQG/LTR controlled system.