• Journal of Agricultural Extension & Community Development
• /
• v.16 no.3
• /
• pp.587-614
• /
• 2009

This research focuses on rural interpreter's behaviors and needs in rural tourism village around country. Although it happens that many farm tourism guides are accomplished in rural tourism village, but significant interest on this topic has not been identified yet. Therefore the primary objective of this study lies in identifying rural interpreter's behaviors and needs who is active play in rural tourism village. The study was conducted in a small rural community where tourism is still at its emerging stage. It was found that rural interpreter played active role by studying about rural culture and farm interpret for himself. But they was pointed out multifarious activities with various rural experience guide, and they used reality in the process of the interpret, but not village history. farm tourism guides demanded their expertise or special ability.

• Journal of Yeungnam Medical Science
• /
• v.6 no.2
• /
• pp.63-70
• /
• 1989

This paper describes to design and to examine the mechanical characteristics of high frequency jet ventilator. The device consists of Phase lock loop(PLL) system, solenoid valve driving control part and Air regulating system. This study is carried out by changing several factors such as endotracheal tube(E.T. tube)diameter, injector cannula diameter, 1%, and frequency(breaths/mim.) having direct effects on the gas exchange as well as parameters of the entrained gas by venturi effects, so as to measure the tidal volume and minute volume. This system characteristics were as follows : 1) Frequency : 6-594bpm 2) Inspiration time : 1-99% 3) Variance of input air pressure : 1-30PSI.

• Journal of the Korean Magnetics Society
• /
• v.1 no.1
• /
• pp.30-36
• /
• 1991

A measurement system for magnetic anisotropy was built. The torque acting on the disc or sperical samples placed in uniform magnetic field was detected with a capacitive transducer which is connected with a transformer ratio-arm bridge. The output of the bridge was amplified with a lock-in amplifier. The cubic anisotropy constant for (100) of 3% Si-Fe was $3.3{\times}10^{4}\;J/m^{3}$. The calibration for the system was carried out with the shape anisotropy of a thin Ni wire.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3B
• /
• pp.65-72
• /
• 1999

A deep-ocean mining riser pipe is subjected to floating vessel motion as well as environmental forces arising from currents and waves. The dynamic analysis is carried out for a deep-ocean mining riser pipe by using a finite element method. The vortex shedding which excites risers in a direction perpendicular to the flow and induces transverse response is considered. It is demonstrated that transverse displacements due to vortex shedding is greatly increased in lock-in regions. The result of this study is compared with other results having good agreements.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.1
• /
• pp.103-109
• /
• 1998

A new flux-weakening scheme for an Interior Permanent Magnet Synchronous Motor (IPMSM) is proposed. This control scheme enables the maximum torque operation for the fast acceleration in the constant power region according to the current and voltage limit condition. Especially the dynamic performance of the braking in the flux-weakening region is improved with the compensation of the stator resistance. Also since the onset of the flux weakening operation is adjusted according to the load conditions, the machine parameters, and whether motoring or braking region, the stable and precise transition operation into or out of the flux weakening region can be achieved. The effectiveness of the proposed scheme is verified through experiments with an IPMSM drive system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.476-476
• /
• 2009

Periodic vortex separations generate periodic vertical forces acting on a trailing edge of an airfoil. When a natural frequency of the trailing edge of the airfoil is close to a vortex shedding frequency, an amplitude of the edge oscillation becomes maximal; it makes intensive noise called singing. Motion of the trailing edge may also feedback to the vortex shedding so that self-sustained oscillation appear, and a resonant frequency is locked in some interval of the speed of the incident flow. In this study, a theoretical model is proposed and applied for modeling an airfoil singing. Results are compared with experimental measurements which are carried out in an anechoic wind tunnel.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.955-958
• /
• 1999

We designed a phase locked loop (PLL), which is applicable to microprocessor clock generation application. The designed PLL has a new simple phase frequency detector (PFD) which eliminate dead-zone and has a good high frequency characteristic. The lock-in range of the designed PLL is 50 MHz ~ 150 MHz at 3.3v power supply voltage. The design is carried out using a 0.6${\mu}{\textrm}{m}$ triple metal CMOS process. The area of the layout is 0.35mm by 0.42mm with 359 transistors.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.2
• /
• pp.115-121
• /
• 2010

Periodic vortex separations generate periodic vertical forces acting on a trailing edge of an airfoil. When a natural frequency of the trailing edge of the airfoil is close to a vortex shedding frequency, an amplitude of the edge oscillation becomes maximal; it makes intensive noise called singing. Motion of the trailing edge may also feedback to the vortex shedding so that self-sustained oscillation appears, and a resonant frequency is locked in some interval of the speed of the incident flow. In this study, a theoretical model is proposed and applied for modeling an airfoil singing. Results are compared with experimental measurements which are carried out in an anechoic wind tunnel.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.114-125
• /
• 1993

Thermoelastoplastic analysis of a typical device consisting of fixed tube and movable case having an inital clearance in between, which is subjected to pressure and thermal load, has been carried out to examine the cause of malfunction mainly at high temperature condition, and to improve the design. Stresses, deformed shape, interface state and their effects on normal function of case are discussed by using finite element method. The extraction energy can be remarkably reduced by changing the configuration of tube from the present design (Parallel type) to the improved design (Tapered type). This effect has been proved by sustained cyclic function test.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.906-907
• /
• 2008

기존의 LED(Light Emitting Diode)를 이용한 LCD(Liquid Crystal Display) 백라이트 유닛은 무부하시 불필요한 전력소모가 발생하는 경우가 있어 보호회로가 필요하였다. 그래서 본 논문은 보호회로를 이용한 LCD 백라이트 유닛용의 LED 구동회로를 제안한다. 제안된 보호회로는 실험 결과 무부하시 피드백 제어부 IC(Integrated Circuit)의 전원전압 VCC를 UVLO(Under Voltage Lock Out)전압 이하로 강하시켜 무부하시 소비되는 전력을 줄일 수 있었다. 또, 무부하시 부스트 컨버터 출력부의 전압스트레스를 줄일 수 있었고, 유부하시 보호회로가 있는 컨버터와 보호회로가 없는 컨버터의 효율비교에서 거의 같은 효율이 측정되었다.