• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.577-580
• /
• 2003

The magnetostriction of FeCoGe/phenol composites, which is one of the magnetostrictive materials, measured at the external magnetic field. The measurement was carried out using the electrical-resistance strain gage, the wheaten's Bridge for eliminating the unnecessary voltage, and the lock-in-amp for signal amplification and noise filtering. When the external magnetic field was applied in the longitudinal the samples, the maximum strain of 120ppm was taken with regard to the 10wt.% phenol composite. This results indicate that the FeCoGe/phenol composites can be useful as an actuator because it has larger stain than the other solid state actuators such as piezo electric materials.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.454-456
• /
• 2002

Embedded system is used a lot in electric home appliances and home network equipment. However, this system is designed to operate by the system operator directly at home and operator could find out them only when he pays attention to the system in case event happens. In this paper, to improve above things, it designed to remote-control system anywhere in which internet access is possible as well as at home, and also it designed SMS(short message service) information transmission system to inform the errors to the operator when they happen. To design the system, development board(be included the Strong Arm), CDMA module, and electric door lock are used as hardware, and web browser, CGI(common gateway interface) programming, and C-language are used for implementation of software in embedded-linux platform.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.364-369
• /
• 2012

The vehicle sound classified into driving sound due to power-train, operating sound due to electric motor like sunroof, door lock and electronic sound. These vehicle sound has various features depend on the characteristic of sound that user required. And it based on cultural and regional difference of user. In this study, the user required vehicle sound characteristics for luxury sedan was investigated in overall viewpoint. And virtual target sound was developed through the result of user preference investigation. Next, Jury test was carried out in Germany, USA and Korea for evaluating the target sound. And the regional and individual difference of preference was analyzed through the result of jury test. This result of research will be contributed to design of vehicle sound quality and target sound setting.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.29-39
• /
• 1998

It is well known for 410L ferritic stainless steel powder to applicate a sensor ring in anti-lock brake system of automobile, several studies, because of its excellent magnetic properties. This study was carried out In investigate the magnetic properties such as the maximum magnetic induction, coercivity and maximum permeability of the materials with functions of sintering density! time and temperature, and concluded as follows； 1. Sintering under the circumstances of hydrogen gas and tile temperature of $1250^{\circ}C$ for 60min. showed that nitrogen was increased, whereas carbon and oxygen decreased in quantities. 2. Both maximum magnetic induction value of 4700Gauss and permeability of 200 were obtained at the maximum sintering density of 6.89g/$cm^3$. Here, the properties showed a linear increasement with increasing the sintering density. 3. Coercivity sharply increased with incresing the sintering density and reached to 7.6Oe at the maximum sintering density of 6.89g/$cm^3$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.107-109
• /
• 2003

The magnetostriction of FeCoGe/phenol composites is measured under the external magnetic field. A few Measurement are carried out by using the electrical-resistance strain gage, the Wheaton Bridge for eliminating the unnecessary voltage, the lock-in-amplifier for the signal amplification and noise filtering. When the external magnetic field is applied to the longitudinal direction against those samples which is the 10wt.% phenol in composites, the theoretical maximum strain of 120ppm is obtained. According to the larger strain than that of others solid state actuators and piezoelectric actuators. FeCoGe/phenol composites could be useful as an actuator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.687-694
• /
• 1999

In this paper, to draw out the parameter of synchronization for ADSL(Asymmetric Digital Subscriber Line) chip design, we analyze the performance of STR(Symbol Timing Recovery) and frame synchronization with computer simulation. We analyze and design PLL(Phase Lock Loop) loop for ADSL. As a result, we obtained the optimum parameter of STR to design ADSL chip. Also, when performed frame synchronization with several algorithm, we analyzed the performance of FER(Frame Error Rate) and the effect of frame offset with computer simulation.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.16 no.1
• /
• pp.55-59
• /
• 2016

Dental treatment under sedation requires various sedation depths depending on the invasiveness of the procedure and patient drug sensitivity. Inappropriate sedation depth may cause patient discomfort or endangerment. For these reasons, patient-controlled sedation (PCS) pumps are commonly used. Patients are able to control the sedation depths themselves by pushing the demand button after the practitioner sets up the bolus dose and lock-out time. Dexmedetomidine is an ${\alpha}$-2 adrenoreceptor agonist with sedative, analgesic, and anxiolytic properties. It has been widely used for sedation for its minimal respiratory depression; however, there are few studies on PCS using dexmedetomidine. This study assessed the applicability of dexmedetomidine to PCS.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.13 no.3
• /
• pp.81-87
• /
• 2013

This article discusses the issues of benefit and possibility of application of patient-controlled sedation (PCS) for the dental treatment. The purpose of administering PCS for patients is to diminish anxiety and to provide cooperative and effective dental treatment. But there are a lot of barriers to application of PCS such as knowledge about pharmacokinetics of sedatives, expensive high speed and patient-controllable syringe pump, and well educated sedationist. And there could be risk of deep sedation, airway obstruction and hypoxic brain damages, etc. In order to decrease incidence of complication, appropriate drug selection, selection of right bolus dose, lock-out time is much important.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.2
• /
• pp.80-82
• /
• 2004

The a.c. technique is employed to evaluate electrochemical characteristics of Naphthalie-1,4,5,8-tetracarboxylic acid bisanilide (NTB). The measurements were carried out in dry and pure propionitrle (PCN) and acetonitrile(CAN) at the hanging mercury drop electrode [HMDE). An A.C. phase sensitive detector using computer controlled lock-in amplifier was employed. Primary goal of this report, was to establish on a firm the rare behavior of the phase angle associated with a.c. polarograms of the compound. Although, not an initial goal of this study, the electron transfer rate parameters attending the electroreduction of the compound under investigation were determined. This because the results shed some light on the electrokinetics in aprotic solvent which until recently negligible data were available. Experimental Results and comparison of data obtained are reported. The good precision of the method makes it suitable for studying electrochemical data with unusual behavior at electrodes in non aqueous media.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.173-175
• /
• 2005

Malfunction of Klippon relay in Cheju-Haenam HVDC system has been caused by the inflow of high voltage arc. In this paper, we have studied on the theoretical examination and data analysis of Klippon relay, and the countermeasures against the problems were suggested according to their causes. Grounding problem in Klippon relay is removed by one-point earth connection and by modification of grounding circuit. The effects of over current surge was removed by attaching blocking diodes by series In Klippon relay to remove surge input in Klippon relay's mercury contact. The problem of Induced overvoltage by 86re1ay excitation coil, was removed by attaching Free-wheeling diode in parallel with the excitation coil of Lock-out relay.