• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.851-856
• /
• 2003

The LM generator is an improved summation generator with maximum period, near maximum linear complexity and maximum order of correlation immunity, and it has a property with the input-output correlation immunity In this paper, we propose the high-speed m-parallel LM-BSG and 8-parallel LM-BSG for detail as a design example. When compared with a conventional stream cipher, the properties of the proposed cipher exhibited the same crypto-degree (security) with a rt times faster processing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1104-1109
• /
• 2015

Due to the rapid growth in digital contents, it is important for us to design a high speed and secure encryption algorithm which is able to comply with the existing and future needs. This paper proposes an alternative approach for self-decimated LM-128 summation sequence generator, which will generate a higher throughput if compared to the conventional generator. We design and implement a threshold clock-controlled LM-128 and prove that it has a lower clock cycle and hence giving a higher key stream generation speed. The proposed threshold clock-control LM-128 generator consists of 256 bits inner state with 128 bits secret key and initialization vector. The cipher achieves a security level of 128 bits to be adapted to the digital contents security with high definition and high quality.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1011-1014
• /
• 2004

본 논문에서 제안된 Self_Decimated LM-128 키 수열 발생기(Keystream generator)는 2개의 비트 메모리 합산 수열발생기(summation generator)를 갖는 자체 클럭 조절형 키 수열 발생기(stream cipher)이다. Self_Decimated LM-128은 LM 계열에서 제시된 특수한 암호로 128비트 키와 128비트 초기 벡터 그리고 257 비트의 내부 상태를 가지며 128 비트의 보안 레벨을 유지한다. 알려진 보안 분석의 공격에 대비해서 2-비트 메모리를 이용한 합산 수열발생기와 자체 클럭 조절형 키 수열 발생기를 포함한다.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.15 no.2
• /
• pp.64-70
• /
• 2019

In recent years, attention has been paid to the integrity of steam generator (SG) tubes due to severe accident and beyond design basis accident conditions. In these transient conditions, steam generator tubes may be damaged by high temperature and pressure, which might result in a risk of fission products being released to the environment due to the failure. Alloy 690 which has increased the Cr content has been replaced for the SG tube due to its high corrosion resistance against stress corrosion cracking (SCC). However, there is lack of research on the high temperature creep rupture and life prediction model of Alloy 690. In this study, creep test was performed to estimate the high temperature creep rupture life of Alloy 690 using tube specimens. Based on manufacturer's creep data and creep test results performed in this study, creep life prediction was carried out using the Larson-Miller (LM) Parameter, Orr-Sherby-Dorn (OSD) parameter, Manson-Haford (MH) parameter, and Wilshire's approach. And a hyperbolic sine (sinh) function to determine master curves in LM, OSD and MH parameter methods was used for improving the creep life estimation of Alloy 690 material.

• Journal of the Korea Society for Simulation
• /
• v.6 no.2
• /
• pp.1-14
• /
• 1997

The characteristics of the flow and energy conversion in OMACON liquid-metal MHD system are investigated. Numerical simulation of two-phase flow in the OMACON system without magnetic field was carried out by the Phoenics code and the energy conversion characteristics are studied in association with the fact that the mechanical energy loss at the nozzle of the OMACON system are to be converted into electrical energy. In this system, working fluid (gas) is injected through the mixer located at the bottom of the riser, and is mixed with hot liquid metal. Therefore in the riser two-phase flow is developed under the influence of the gravity. In this study, the interaction between the gas and liquid is considered by the use of IPSA(InterPhase Slip Algorithm) where standard drag coefficient has been used. It has been assumed that in the flow regime the liquid is continuous and the gas is dispersed. For the liquid and gas, the continuity equations, momentum equations and energy equations are solved respectively in association with void fraction in the flow field. In order to calculate the energy conversion efficiency, firstly the ratio of the mechanical energy loss of liquid metal flow at the nozzle to the input thermal energy is considered. Secondly flow pattern of liquid metal in the generator has been analyzed, and the characteristics of the conversion of the mechanical energy into the electrical energy has been investigated. For an representative case where Hartmann number is 540 and magnetic field is 0.35 T, the present analysis shows that the energy conversion efficiency is 0.653. This result is considered to be reasonable in comparison with published experimental results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.1023-1026
• /
• 2013

The electronic equipment which was exposed to high level pulsed radiation is damaged as Upset, Latchup, and Burnout. Those damages has come from the instantaneous photocurrent from electron-hole pairs generated in itself. Such damages appeared as losses of power in military weapon system or of blackout in aerospace equipment and eventually caused in gross loss of national. In this paper, we have implemented a RDC(Radiation detection and control module) as part of the radiation protection technology of the electronic equipment or devices from the pulsed gamma radiation. The RDC which is composed of pulsed gamma-ray detection sensor, signal processors, and pulse generator is designed to protect the important electronic circuits from the pulse radiation. To verify the functionality of the RDC, LM118s which had damaged by the pulse radiation were tested. The test results showed that the test sample applied with a RDC was worked well in spite of the irradiation of the same pulse radiation. Through the experiments we could confirm that the radiation protection technology implemented with RDC had the functionality of radiation protection to the electronic devices.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.1
• /
• pp.55-64
• /
• 2023

Gas turbine engines are widely used as prime movers of generator and propulsion system in warships. This study addresses the problem of designing a DS-based PID controller for speed control of the LM-2500 gas turbine engine used for propulsion in warships. To this end, we first derive a dynamic model of the LM-2500 using actual sea trail data. Next, the PRC (process reaction curve) method is used to approximate the first-order plus time delay (FOPTD) model, and the DS-based PID controller design technique is proposed according to approximation of the time delay term. The proposed controller conducts set-point tracking simulation using MATLAB (2016b), and evaluates and compares the performance index with the existing control methods. As a result of simulation at each operating point, the proposed controller showed the smallest in %OS, which means that the rpm does not change rapidly. In addition, IAE and IAC were also the smallest, showing the best result in error performance and controller effort.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.417-420
• /
• 2000

태양전지는 빛에너지를 전기에너지로 변환시켜주는 에너지변환 소자이다. 본 논문에서는 이 태양전지를 수신기의 전원 겸 안테나로써 사용하고자 한다. 태양전지를 수신기의 안테나로 사용하기 위해서는 태양전지가 받아 들이는 빛에너지에 음성신호를 인가해주어야 한다. 실험에서는 일정하지 않은 음성신호대신 Function Generator를 이용하여 신호를 넣어주고 이 신호를 LM741과 KA2904 내의 OP-amp를 통하여 증폭시킨 후 발광 다이오드(LED)에 인가시켜 주었다. LED의 광신호를 Solar-Cell이 받아들여, 직류전압은 전원으로 사용되고 교류신호는 음성신호로 사용된다. 본 실험은 빛을 이용한 무선 송·수신기의 기초적인 단계에 불과하나 고도의 기술이 필요하지 않으므로 그 파생효과와 발전 방향은 무궁무진하다고 할 수 있다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.10
• /
• pp.1421-1424
• /
• 2013

The electronic equipment which is exposed to high level pulsed radiation is damaged by Upset, Latchup, and Burnout. Those damages come from the instantaneous photocurrent from electron-hole pairs generated in itself. Such damages appear as losses of a power in military weapon system or as a blackout in aerospace equipment and eventually caused in gross loss of national power. In this paper, we have implemented a RDC(Radiation detection and control module) as a part of the radiation protection technology of the electronic equipment or devices from the pulsed gamma radiation. The RDC, which is composed of pulsed gamma-ray detection sensor, signal processors, and pulse generator, is designed to protect the an important electronic circuits from the a pulse radiation. To verify the functionality of the RDC, LM118s, which had damaged by the pulse radiation, were tested. The test results showed that the test sample applied with the RDC was worked well in spite of the irradiation of a pulse radiation. Through the experiments we could confirm that the radiation protection technology implemented with the RDC had the functionality of radiation protection for the electronic devices.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.151-162
• /
• 2020

This paper presents an acoustic inversion method for estimating the bubble size distribution. The estimation error of the attenuation coefficient represented by a Fredholm integral equation of the first kind is defined as an objective function, and an optimal solution is found by applying the Levenberg-Marquardt (LM) method. In order to validate the effectiveness of the inversion method, numerical simulations using two types of bubble distribution are performed. In addition, a series of experiments are carried out in a water tank (1.0 m × 0.54 m × 0.6 m), using bubbles generated by three different generators. Images of the distributed bubbles are obtained by a high-speed camera, and the insertion losses of the bubble layer are measured using a source and a hydrophone. The image is post-processed to glance a distribution characteristics of each bubble generator. Finally, the size distribution of bubbles is estimated by applying the inversion method to the measured insertion loss. From the inversion results, it was observed that the number of bubbles increases exponentially as the bubble size decreases, and then increases again after the local peak at 70 ㎛ - 120 ㎛.