• 한국인터넷방송통신학회논문지
• /
• 제17권1호
• /
• pp.129-137
• /
• 2017

본 논문에서는, 스위칭 손실이 적고 효율이 높은 이점을 갖고 있는 LLC 공진형 컨버터에 대하여 선형화된 수학적 모델을 정립하고 디지털 제어기 설계 과정을 제안한다. LLC 공진형 컨버터의 비선형 모델에 대하여 EDF(Extended Describing Function) 기법을 도입하여 비선형성을 선형 근사화시킨 선형 소신호 모델을 정립하고 Ziegler Nichols 방법을 이용하여 제어기 계수를 선정하였으며 연속시간 제어기를 디지털 제어기로 변환하여 적용한다. 유도된 선형 소신호 모델에 기반하여 전압 제어기를 설계하고, MATLAB 시뮬레이션을 통하여 제어기의 성능을 검증한다. 또한, 부하 변화 및 모델링 오차를 고려한 시뮬레이션을 통하여 LLC 공진형 컨버터에 대해 설계된 전압 제어기의 타당성 및 제어성능을 분석한다.

• 조명전기설비학회논문지
• /
• 제27권4호
• /
• pp.48-53
• /
• 2013

In general, the LLC resonant topology consists of three stages as; square wave generator, resonant network, and rectifier network. LLC resonant converter has the time slowly varying parameters. However, the power LEDs as the load of LLC converter can be regarded as fast time varying parameters. In this paper, the mathematical model of half-bridge resonant converter including with the power LEDs is introduced for the current controller design model. Using this controller design model, the parameter adaptive output feedback controller will be designed to control the power LEDs current. In order to show the validities of the proposed model, the parameter adaptive output feedback controller, the experimental investigation will be presented.

• 전력전자학회논문지
• /
• 제17권4호
• /
• pp.345-352
• /
• 2012

This paper proposes a new method to reduce 120Hz output voltage ripple of LLC converter using resonant voltage controller. This method can reduce the 120Hz output voltage ripple with very high gain at this frequency by the resonant controller with previous PI voltage controller. The reason why the voltage ripple can be reduced is explained by the Bode diagram comparing with the previous PI controller. The simulation with Matlab/Simulink is carried out for this resonant controller and the simulation results show that resonant controller can reduce the 120Hz output voltage ripple. Experiments with DSP controller also carried out and the experimental results also show that the usefulness of the proposed voltage controller.

• 전력전자학회논문지
• /
• 제23권3호
• /
• pp.225-230
• /
• 2018

This paper proposes a parametric design of an LLC resonant inverter used for a microwave oven. To improve the harmonic performance of the microwave oven, a current controller with a variable PI gain is proposed. Due to the recent strengthening of harmonics regulations, inverter control technology for microwave ovens is now required to satisfy harmonic performance. In an LLC resonant inverter, the voltage gain varies remarkably depending on the magnetron voltage, output power, and input voltage. To satisfy harmonic performance, a controller that can maintain operation in the zero-voltage switching (ZVS) region and control changes in voltage gain is required. The modified design of the LLC resonant inverter ensures ZVS operation even when the magnetron is heated. Application of the variable current controller improves harmonic control according to the instantaneous gain curve change. The validity of the proposed power control with a variable current controller is verified by experiments with a 1200 W microwave oven.

• 대한전자공학회논문지SD
• /
• 제47권5호
• /
• pp.71-79
• /
• 2010

본 논문은 LLC 공진 제어 IC(Integrated Circuit) 설계에 관한 것이다. LLC 공진 제어 IC는 DC/DC 변환하기 위해서 외부의 공진 회로에 입력되는 주파수를 조정하여 트랜스포머를 통해서 2차 측의 출력 전압을 조정한다. 공진회로에 펄스를 공급하기 위한 클럭 생성기가 내장되어 있고, 클럭 주파수는 외부 저항을 사용하여 튜닝이 가능하다. 또한 외부 피드백 입력되는 전압을 이용해 주파수 조정이 가능하도록 VCO(Voltage Controlled Oscillator) 기능을 내장하였다. 동작의 신뢰성을 높이고 회로를 보호하기 위해서 UVLO(Under Voltage Lock Out), brown out, fault detector의 보호회로를 내장하였고, 입력 커패시턴스가 큰 용량의 IGBT(Insulated Gate Bipolar Transistor)를 구동하기 위해서 높은 전압, 전류의 제공이 가능한 HVG(High Side Driver), LVG(Low Side Driver) 드라이버 회로를 내장하였다. LLC 공진 제어 회로를 하나의 칩으로 구현하여 LLC 공진 회로를 제어하는데 있어 필요한 회로들을 설계하였다. 설계한 LLC 공진 제어 IC는 0.35 um 2P3M BCD 공정으로 제작하였다. 칩의 면적은 $1400um{\times}1450um$ 이고, 5V, 15V 두 가지의 전원 전압을 사용한다.

• Journal of Power Electronics
• /
• 제12권6호
• /
• pp.886-894
• /
• 2012

This paper presents a secondary-side, dual-mode feedback LLC resonant controller IC with dynamic PWM dimming for LED backlight units. In order to reduce the cost, master and slave outputs can be generated simultaneously with a single LLC resonant core based on dual-mode feedback topologies. Pulse Frequency Modulation (PFM) and Pulse Width Modulation (PWM) schemes are used for the master stage and slave stage, respectively. In order to guarantee the correct dual feedback operation, Phased-Locked Loop (PLL)-based automatic duty control circuit is proposed in this paper. The chip is fabricated using $0.35{\mu}m$ Bipolar-CMOS-DMOS (BCD) technology, and the die size is $2.5mm{\times}2.5mm$. The frequency of the gate driver (GDA/GDB) in the clock generator ranges from 50 to 425 kHz. The current consumption of the LLC resonant controller IC is 40 mA for a 100 kHz operation frequency using a 15 V supply. The duty ratio of the slave stage can be controlled from 40% to 60% independent of the frequency of the master stage.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권2호
• /
• pp.94-97
• /
• 2007

The desin and implementation of a CMOS analog integrated circuit that provides dual-mode modulations, PWM for active clamp reset converter and PFM for LLC resonant converter, is described. The proposed controller is capable of implementing programmable soft start and current-mode control with compensating ramp for PWM and frequency shifting soft start for PFM. Also it provides delay time for both modes. PWM mode is implemented by active clamp reset converter and PFM mode is implemented by LLC resonant convereter, respectively. The chip is fabricated using the 0.6um high voltage CMOS process.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.861-875
• /
• 2015

This paper presents a wide frequency range LLC resonant controller IC for LED backlight units. In this paper a new phase-domain resonance deviation prevention circuit (RDPC), which covers a wide frequency and input voltage range, is proposed. In addition, a wide range gate clock generator and an automatic dead time generator are proposed. The chip is fabricated using 0.35 μm BCD technology. The die size is 2 x 2 mm2. The frequency of the clock generator ranges from 38 kHz to 400 kHz, and the dead time ranges from 300 ns to 2 μs. The current consumption of the LLC resonant controller IC is 4 mA for a 100 kHz operation frequency using a supply voltage of 15 V.

• 전력전자학회논문지
• /
• 제26권1호
• /
• pp.46-52
• /
• 2021

This study proposes a feedforward compensation control method to reduce 120 Hz output voltage ripple in a single-phase AC/DC rectifier system composed of PFC and LLC resonant converters. The proposed method compensates for the voltage ripple of the DC-link by using the AC input and DC output power difference, and then reduces the final output voltage ripple component of 120 Hz through feedforward compensation based on the linearized frequency gain curve of the LLC resonant converter. Through simulation and experimental results, the validity of the ripple reduction performance was verified by comparing the conventional PI controller and the proposed feedforward compensation method.

• 전력전자학회논문지
• /
• 제22권5호
• /
• pp.457-462
• /
• 2017

This paper proposes a digital power control of the LLC resonant half-bridge inverter for high power microwave oven application. Conventional half-bridge inverter for driving a microwave oven uses a hardware-based power control method which varies the frequency according to the AC source voltage. In this case, it is difficult to control the output power according to the variation of the load status of magnetron. The proposed power control consists of an instantaneous current generator and a current controller. Instantaneous current generator makes an instantaneous current reference from power command using input voltage information. Current controller controls input current which has an information of status of magnetron. The proposed power control does not require any compensation algorithm for the change of the load status of the magnetron and change of input voltage. The validity of the proposed method for the control of the change of input voltage and frequency is verified by both simulation and experiment.