• 한국전기전자재료학회논문지
• /
• 제27권2호
• /
• pp.126-131
• /
• 2014

In this paper, plant crops used in the region to grow crops for the LED lighting area of a rectangle to fit the light distribution to maximize the efficiency of a rectangular distribution was made of LED lights. After the fabrication of LED lamps, light distribution, and in the area of $1.2m{\times}3m$ was the analysis of Illuminance chart. As a result of examining the performance light distribution for total Emin/Eav is 56%, and the target area of the light distribution compared to normal lamps Emin/Eav is improved by about 17%. In addition, plants grown in the area to minimize the outgoing light distribution can be focused on the cultivation area, according to the distance of the plants and be able to have the best luminous efficacy is judged.

• 한국세라믹학회지
• /
• 제43권3호
• /
• pp.169-172
• /
• 2006

We have synthesized a $Eu^{2+}-activated\;{(Sr,Ba)}_2SiO_4$ yellow phosphor and investigated the development of blue LEDs by combining the phosphor with a InGaN blue LED chip (${\lambda}_{em}$=405 nm). The InGaN-based ${(Sr,Ba)}_2SiO_{4}:Eu$ LED lamp shows two bands at 405 nm and 550 nm. The 405 nm emission band is due to a radiative recombination from a InGaN active layer. This 405 nm emission was used as an optical transition of the ${(Sr,Ba)}_2SiO_{4}:Eu$ phosphor. The 550 nm emission band is ascribed to a radiative recombination of $Eu^{2+}$ impurity ions in the ${(Sr,Ba)}_2SiO_4$ host matrix. In the preparation of UV Yellow LED Lamp with ${(Sr,Ba)}_2SiO_{4}:Eu$ yellow phosphor, the highest luminescence efficiency was obtained at the epoxy-to-yellow phosphor ratio of 1:0.45. At this ratio, the CIE chromaticity was x=0.4097 and y=0.5488.

• 전기학회논문지P
• /
• 제63권3호
• /
• pp.178-182
• /
• 2014

This paper investigates the lighting environment of railway system which are mainly used in KTX, Saemaul and Mugunghwa. When lighting used in KTX such as fluorescent lamp and incandescence is being replaced with LED lamp, illumination load of each railroad vehicle has been compared. The comparison result shows that the reduction of power consumption is 43.34% before and after the change. Also it has been performed the economic evaluation.

• Design & Manufacturing
• /
• 제11권2호
• /
• pp.29-36
• /
• 2017

In this study, the non-contact type bicycle generator system considering the recharge is developed to use the eco-friendly energy source when the bicycle is operating. The following three main factors are considered in this study. One of factors is that the intensity of the rotating magnet is in the range of 2,700~4,300 [Gause]. The next factor is that the separation distance of rotating magnet and bicycle rim is in the range of 1.5-3.0 mm. The last factor is that the pedaling speed is in the range of 55 RPM [Wheel speed 5.6Km]~150 RPM [Wheel speed 15.25Km] consirering with the 5 staged gear transmission. The obtained results are as followed. (1) The generator output voltage gradually increases from 3V to 10V with the pedaling speed increases, at the separation distance is less than 2.5 mm and the operating voltage of the LED lamp is generated at a pedaling speed of 60 RPM or more. (2) The output current of the generator increases from 20mA to 40mA with the pedaling speed increases, at a separation distance is less than 2.0 mm and the operating current of the LED lamp is generated at a pedaling speed of 60 RPM or more. (3) When the separation distance was 3.0 mm, the output voltage and current are significantly lower than those of the bicycle LED lamp is generated. (4) The charging time is expected to be 12.24 ~ 17.65 hours when the magnitude of the magnet is 3,400[Gauss] at a pedaling speed of 55 RPM or more. (5) As a result of this study, it is thought that the non-contact type bicycle generator system considering the recharge can replace the conventional friction power generation system.

• 한국약용작물학회지
• /
• 제20권3호
• /
• pp.165-170
• /
• 2012

This study was conducted to evaluate the effect of light spectrum using red (660 nm), blue (460 nm), red and blue mixed (Red : Blue = 6 : 4) LED (light-emitting diode), and fluorescent lamp on antioxidant activities and functional components of dandelion (Taraxacum officinale). Total polyphenol contents in dandelion irradiated with the red and blue mixed or the red LED were 121.77 mg/100 g or 115.36 mg/100 g, respectively, which were greater than those in dandelion treated with blue LED and fluorescent lamp. Asparagine showed the highest content among amino acids in leaves and roots regardless of treatments. Total amino acid was the highest when illuminated with the red LED. DPPH (1,1-diphenyl-2-picrylhydrazyl) radical-scavenging activity and SOD (super oxide dismutase) activity of ethanol extracts were increased under all of the LED treatments compared with fluorescent lamp, and the antioxidant activities were increased by the red and the mixed LED illumination. The results indicate that application of the red and the mixed LED illumination promote antioxidant activity and increase functional components during cultivation of dandelion.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권3호
• /
• pp.267-279
• /
• 2011

LEDs have been used extensively in the mobile device, automobile, and general lighting because they are semi-permanent, long life, less power consumption, reliable and environmentally friendly. In this paper, the accelerated degradation test(ADT) for a general lighting 4W LED Lamp using external converter is considered. The conditions of ADT are high temperature and high humidity. We show that its life time is log-normally distributed with same parameters under both a normal condition and an accelerated condition, and also derive an accelerated factor.

• 한국전기전자재료학회논문지
• /
• 제26권8호
• /
• pp.629-634
• /
• 2013

The rectified voltage supplied to LED lamp is used in load and then the surplus voltage can be produced in LED lighting. In this case, LED lighting is proposed that can recyclable the excess voltage to supply power to the controller.

• 한국전산유체공학회지
• /
• 제18권1호
• /
• pp.63-68
• /
• 2013

The purpose of this study is to investigate the cooling performance of radial heat sink used for high power LED lightings by natural convection cooling with surrounding air. Experimental and numerical analyses are carried out together. Parametric studies are performed to compare the effects of geometric parameters in radial heat sink such as the number of fins, fin height, fin length, and thickness of fin base as well as the surface coatings of radial heat sink. In this study, the cooling of 60 W LED lamp is examined with radiative heat transfer considered as well as natural convection. Numerical results show the optimum condition when the number of fin is 40, heat sink height is 120 mm, fin length is 15 mm, and fin base thickness is 3 mm. The difference in temperature of the LED metal PCB is within $1^{\circ}C$ between numerical analyses and experimental results. Also, the CNT coating on the heat sink surface is found to increase the cooling performance significantly.

• 생물환경조절학회지
• /
• 제27권2호
• /
• pp.158-165
• /
• 2018

종류가 다른 보광등과 난방등으로 보광을 해 주었을 때, 절화 장미의 수확량, 절화수명, 엽색에 미치는 영향을 비교 분석하였다. 이를 위하여 보광등으로 LED등(Light emitting diode lamp, LED), 메탈할라이드등(Metal halide lamp, MH), 고압나트륨등 (High-pressure sodium lamp, HPS)과 난방등으로 나노탄소섬유 적외선등 (Nano-carbon fiber infrared lamp, NCFI)을 절화장미를 재배하고 있는 농가의 수경재배 베드 위에 설치하였다. 절화 장미 수확량과 판매 가능한 절화수는 HPS 처리에 의해 봄과 가을에 크게 증가하였다. 품질의 주요기준이 되는 절화장은 봄철에는 전등처리에 의해 대조구보다 길어졌으나, 겨울에는 오히려 감소하였다. 겨울에는 전등처리로 인해 개화가 촉진되어 영양생장기간이 상대적으로 짧아졌기 때문으로 생각된다. 절화수명은 전등 처리시간이 짧은 가을에는 처리간 차이가 보이지 않았으나, 겨울에는 HPS에서만 대조구에 비해 3일 정도 길어졌다. 엽색은 가을철 보다는 겨울철에 전등처리의 영향을 크게 받았으며, 모든 보광등(LED, MH, HPS)처리에서 엽색이 짙어진 반면, 난방등으로 이용되고 있는 NCFI에서는 대조구와 비슷한 밝기였다. 결론적으로, HPS는 절화장과 절화수명을 길게하며, 수확량도 증가시키므로 매우 좋은 보광등이라고 판단되었다. NCFI는 발열양이 많기 때문에 난방등으로의 기능은 충분할지라도 판매 가능한 절화수가 감소하고 품질지수가 저하되기 때문에 보광등으로서의 역할은 미약할 것으로 판단되었다.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.487-492
• /
• 2012

In this study we researched a spotlight in LED lighting. Ordinary LED spotlight was manufactured with characterized property of traveling straightness of LED light source, but multiple use of shell type LED, a yellow band has formed caused by light source interference between the LED. Also, there was a high miscellaneous light efficiency with losing light source homogeneity and efficiency due to light source control uneasiness. The study uses aspheric reflector and aspheric lens, so we can control the light source of LED spotlight with effectively and we reached surface light source by using COB/COM for LED module. Furthermore it can change its use by a reduced scale of light system. It has been designed to make its various application from low power consumption of bicycle lamp, up to high power consumption of automobile lamps and lighthouse.