• 전기전자학회논문지
• /
• 제21권4호
• /
• pp.368-374
• /
• 2017

본 연구에서는 220[V] 상용전원을 대체한 태양전지 모듈을 응용하고 등 기구는 할로겐 등이나 나트륨 등을 대체한 LED 조명을 이용한 저전력형 LED 보안등을 개발하였다. 또한 LED 구동제어기의 발열문제와 구동전류를 최소화할 수 있는 PWM형 구동제어회로를 설계하였다. 개발된 시스템에서, 광 효율에 대한 측정값은 93.6 [lm/Ｗ] 이고, LED 램프의 발열 제어를 위하여 제어기 내부에 고 정밀 온도센서(TC1047A)를 사용하였다. LED 조명등에서 발생하는 고열을 제거하기 위하여 금속 삽입형 방열 장치를 통하여 대기 속으로 신속하게 다중분산 시키도록 설계하였다. LED 조명등의 발열제어 온도 범위는 $50{\sim}55[^{\circ}C]$였다. LED 보안등의 광속 및 점등 속도는 0.5[sec] 이고 LED 램프의 빔 확산 각도는 높이 6[m]를 기준으로 하는 배광곡선에 의해 약 $110[^{\circ}]$의 빔 각도를 얻었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.382-384
• /
• 2013

LED는 일반 백열등에 비해 훨씬 밝으면서도 저전력이라는 장점을 지니고 있다. 이에 기존 형광등이 지니는 효율적, 환경적 문제점을 개선하기 위해 LED형광등의 개발과 상용화가 이루어 졌다. LED는 형광등과 달리 극성을 지니는 단방향성 소자로 교류전원을 직접 쓸 수 없기 때문에 전원공급장치를 필요로 한다. 이 전원공급장치는 부피가 크고 가격이 비싸기 때문에 유지비용면에서 일반 형광등에 비해 기능성이 떨어진다. 본 연구에서는 이 전원공급장치를 대신하여 간략하게 AC전원을 정류하고, 전압변동에 따른 전류변화로 인한 빛의 밝기가 변하는 현상을 없애기 위해 정전류로 제어할 수 있는 회로를 구성하고 이를 LED모듈과 구분하여 Plug in/out 방식의 교체형 모듈로 구성하여 유지보수에 있어 저렴하고 손쉬운 교체가 가능한 소자개발방법을 제안하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1713_1714
• /
• 2009

본 연구는 LED 광원을 이용한 절전형 라인 조명제어장치의 개발에 관한 것이다. 기본 광원은 5W급 고휘도 LED Lamp를 기본적으로 1~5개의 개별 램프를 제어하며 LED Lamp의 불량상태와 운전상태 감시를 위한 정전류 방식의 구동 기능을 포함하고 여러 단계의 밝기 변화와 절전, 방열을 고려하여 PWM 방식으로 구동 밝기조절 및 점멸 주기 제어기능을 갖는다. 이장치는 도로의 라인조명용 단위장치로 구성될 수 있으며 개별적으로 중앙통제시스템과 통신제어기능을 수행할 수 있게 구성된 시스템이다.

• 센서학회지
• /
• 제24권5호
• /
• pp.342-347
• /
• 2015

We introduce an indoor broadcasting system using light-emitting diode (LED) lamps coupled with a 220 V power line. Two couplers connected to the power line constitute a power line communication (PLC) link. The transmission path from an LED lamp to a photodetector forms a visible light communication (VLC) link in free space. When the LED lamp is coupled to the power line, a composite PLC-VLC link is formed, making it possible to transmit a VLC signal beyond line-of-sight. In experiments, a 4 kHz analog signal modulated with a 100 kHz carrier was sent to the power line by a PLC coupler, and LED lamps coupled to the power line detected the signal and radiated it to multiple VLC receivers in the room. This configuration is useful in expanding an indoor VLC sensor network to adjacent rooms or constructing a voice broadcasting system in a building or apartments with existing power lines.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.243-247
• /
• 2009

A Radioactive constraint of the nuclear fuel assembly irradiated by neutron during normal operation cycle of the nuclear power plant is typically on the order of about 3 kGy/h. In order to inspect nuclear fuel assembly using a VT (vision technology) system, the light such as halogen lamp is used. As the halogen lamp has lower color temperature than the sun light, the objects under halogen lamp illumination are seemed to be tinted with red. In this paper, high brightness LED is considered to be used as the light source of VT system. The high brightness LED, which is a key light source of the VT system, have been gamma irradiated at the dose rate of 4 kGy/h during two hours up to a total dose of 8 kGy. The radiation induced color-center in the LED housing cap made of plastics materials is observed.

• 조명전기설비학회논문지
• /
• 제27권7호
• /
• pp.1-7
• /
• 2013

LED lamps are appropriate to the light source for use in broadcasting lighting. When the lighting frequency of LED lamp is different from the shutter frequency of camera, however, the flicker appears on the moving image which is taken by the camera under the dimmed light of LED lamp with conventional dimming methods. In this study, a new dimming method for the LED lamps used as the broadcasting lighting is proposed to minimize the flicker. A lighting period in the proposed dimming method is divided into the several sub-periods which have weight of the bits. Also, the proposed dimming method has characteristics that are optimizing the turn-on timings of two LED lamps to reduce the turn-off periods of the lamps and not to overlap the turn-on periods of the lamps. In the experiments, the incidence of the flicker is taken by the camera under several lighting conditions of the conventional dimming methods and the proposed dimming method. In addition, the brightness values of the frames are obtained in the moving image, and incidence of the flicker is evaluated and compared with conventional methods. From the results, the incidence of the flicker in the proposed method is more improved than the conventional methods.

• KIEAE Journal
• /
• 제13권2호
• /
• pp.47-52
• /
• 2013

The problems of light pollution first became an issue in the 1970s when astronomers identified the degradation of the night sky due to the increase in lighting associated with development and growth. As more impacts to the environment by lighting have been identified, many attempts have been made for reducing light pollutions. To prevent light pollution and increase energy efficiency, Seoul Metropolitan Government(SMG) replaced metal halide road lighting to LED luminaire in four arterial highway in Seoul. The present study compared the lighting characteristics of metal halide and LED luminaire in terms of Korea Standard for road lighting(KS A 3701) and BUG rating from Illuminating Engineering Society of North America(IESNA). The results showed that LED luminaire increased road surface luminance up to 2 times in average compared to the metal halide environment. Also, LED luminaire reduced the glare value by 2 times and luminous flux over 50% than the metal halide luminaire. In comparison with the BUG ratings, LED luminaire rated 1 degree lower for the backlight ratings and 3-4 degrees lower for the uplight ratings. The measured values testified that the LED luminaire is effective for roadway lighting and light pollution reduction.

• 전기학회논문지
• /
• 제57권12호
• /
• pp.2276-2280
• /
• 2008

In this paper, we present thermal dependancy of LED package element by changing temperature of MCPCB for design high efficiency LED lamp, and confirmed influence of LED chip against temperature with analysis of thermal resistance and thermal capacitance. As increasing temperature, WPOs were decreased from 25 to 22.5 [%] and optical power were also decreased. that is decreased reason of optical power that forward voltage was declined by decrease of energy bandgap. Therefore optical power by temperature of MCPCB should consider to design lamp for street light and security light. Moreover, compensation from declined optical efficiency is demanded when LED package is composed. Also, thermal resistances from chip to metal PCB were decreased from 12.18 to 10.8[$^{\circ}C/W$] by changing temperature. Among the thermal resistances, the thermal resistance form chip to die attachment was decreased from 2.87 to 2.5[$^{\circ}C/W$] and was decreased 0.72[$^{\circ}C/W$] in Heat Slug by chaning temperature. Therefore, because of thermal resistance gap in chip and heat slug, reliability and endurance of high power LED affect by increasing non-radiative recombination in chip from heat.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1288-1297
• /
• 2016

This study proposes a single-stage light-emitting diode (LED) tube lamp driver with input-current shaping for T8/T10-type fluorescent lamp replacements. The proposed AC-DC LED driver integrates a dual-boost converter with coupled inductors and a half-bridge series-resonant converter with a bridge rectifier into a single-stage power conversion topology. This paper presents the operational principles and design considerations for one T8-type 18 W-rated LED tube lamp with line input voltages ranging from 100 V rms to 120 V rms. Experimental results for the prototype driver show that the highest power factor (PF = 0.988), lowest input current total harmonic distortion (THD = 7.22%), and highest circuit efficiency (η = 92.42%) are obtained at an input voltage of 120 V. Hence, the proposed driver is feasible for use in energy-efficient indoor lighting applications.

• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.67-73
• /
• 2011

A method obtaining position data(x, y) of object accurately is proposed by using a pair of ultrasonic sensors composed of one transmitter and two receivers. And the driving system which controls the light of flat LED lamp locally using array of ultrasonic sensors (3 transmitters and 6 receivers) is developed. As a result, measured values of y are relatively reliable due to its small average of absolute errors of 1.03[cm]. The measured values of x have average error of 8.52[cm], and it is a large value. However, the average error is decreased by 0.65[cm] after applying algorithm for error correction. The experiments to control the light of flat LED lamp locally with algorithm for error correction are carried out. From the result, measured values of x with average error of 0.97[cm] are obtained and they are very good approximations of actual values.