• 한국안전학회지
• /
• 제27권6호
• /
• pp.26-30
• /
• 2012

It is difficult to determine the junction temperature because LED lightings are manufactured using several chips with low power. This paper reports on the finite element method of the determination of junction temperature in the GaN-based LEDs. The calculated junction temperature of the LED chip using FEM was compared with the experimentally measured data. As the results of this study, the junction temperature of LED chips with via holes is lower than that of LED chips without via hole. Therefore, the research of via hole is necessary to decrease junction temperature of LED chips.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.973-977
• /
• 2010

The temperature of junction in LED affects the life time and performance. however, the measurement of junction temperature in module is very difficult. In this paper, to measure the junction temperature in LED module, optical and electrical properties is measured in single package in temperature from 25 [$^{\circ}C$] to 85 [$^{\circ}C$], and then junction temperature can is estimated in module with measuring the average voltage of single package. As results, the junction temperature of single package is measured the temperature of 61.2 [$^{\circ}C$] in ambient temperature, also, the junction temperature of LED module is measured the temperature of 72.5 [$^{\circ}C$] in ambient temperature.

• 산업기술연구
• /
• 제29권B호
• /
• pp.187-191
• /
• 2009

Recently, we have used LEDs to illumination because it has a high luminous efficiency and prolong lifespan. However the light power and lifetime is reduced by junction temperature increment of LED. So it is important to measure the junction temperature accurately. In case of using a electrical method measuring junction temperature of LED. Temperature measurement errors are spontaneously generated because of a parasitic capacitances in LED. In this paper, we proposed a method that reducing LED's parasitic capacitance effects for electrical measurement. It was demonstrated by the experimental result that is more correct than established method.

• 산업기술연구
• /
• 제30권A호
• /
• pp.83-88
• /
• 2010

Recently, the LED lighting is widely used to illumination purpose due to its high luminous efficiency and the long life time. However, the light power and lifetime is reduced by junction temperature increment of LED. So it is important to measure the junction temperature accurately. In this paper, we proposed a new design and implementation method of high power LED junction temperature measurement circuit. The proposed circuit has two current sources which are a driving current source and a measurement is verified by experiment, and the result shows that the proposed circuit is appropriate to practical use.

• 조명전기설비학회논문지
• /
• 제26권2호
• /
• pp.1-7
• /
• 2012

LED package with 4[mm]-height mold was manufactured and the surface temperature was measured directly using both thermocouple and thermal infrared (IR) camera. FVM simulation was conducted to estimate the surface temperature of the same LED package under the same condition, by which the accuracy of the simulation was secured. Then, the effects of the height and thermal conductivity of the mold on the junction temperature of the LED package were investigated by FVM simulation. The results showed that the junction temperature decreased by 10[$^{\circ}C$] when the mold height was 3~5[mm], but the thermal conductivity of the mold didn't affect the junction temperature significantly.

• 한국전기전자재료학회논문지
• /
• 제27권9호
• /
• pp.594-599
• /
• 2014

The heat dissipation conditions of high-power 5 watt LEDs-based searchlight modules were optimized with varying LED bar'shape, materials, and ambient temperature. The LED junction temperature was estimated by using Computational Fluid Dynamics simulation. The optimal heat dissipation conditions were found as follows; LED bar' shape: L=80 mm, W=4 mm, t=10 mm, copper material, LED junction temperature of $116.6^{\circ}C$, ambient temperature of $50^{\circ}C$, total mass of 184 g, and shadowing area of $320mm^2$. The difference between the junction temperatures of our fabricated and simulated LEDs-based searchlight modules is about $3^{\circ}C$, which confirms the validity of our thermal simulation results.

• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.34-41
• /
• 2011

In order to understand the thermal performance of each LED chips in multi-chip LED package, a quantitative parametric analysis of the temperature evolution was investigated by thermal transient analysis. TSP (Temperature Sensitive Parameter) value was measured and the junction temperature was predicted. Thermal resistance between the p-n junction and the ambient was obtained from the structure function with the junction temperature evolution during the cooling period of LED. The results showed that, the thermal resistance of the each LED chips in 4 chip-LED package was higher than that of single chip- LED package.

• 방송공학회논문지
• /
• 제21권5호
• /
• pp.816-823
• /
• 2016

본 논문은 디스플레이 휘도를 증가시키기 위하여 적색, 녹색, 청색 고휘도 Light Emitting Diode(LED)를 광원으로 사용하고, Digital Micro Device(DMD) 패널을 적용한 헤드업 디스플레이에서 세 개의 LED 광원 합성 비율과 합성에 따른 양자화 노이즈를 최소화시키는 LED 합성 비율을 연구하였고, 밝기에 영향을 미치는 녹색 LED 구동 비율과 접합 온도에 대하여 분석하였다. 이를 통하여 39%의 LED 중첩 방법을 통하여 황색과 청록색의 2차원 색을 합성하여 33.3%의 휘도 증대 효과를 얻을 수 있었다. 또한 양자화노이즈를 억제하고 영상 화질 측면에서 우수한 색정밀도를 얻을 수 있었다.

• 한국진공학회지
• /
• 제20권4호
• /
• pp.280-287
• /
• 2011

열전소자를 사용하여 발광다이오드의 방열효과를 조사하였다. 열전소자의 냉각기능인 펠티에 효과(Peltier effect)를 이용하여, 고전력 발광다이오드의 방열과 p-n접합부의 온도를 제어하였다. 정격전류(350 mA)에 대한 고전력(1 W급) 발광다이오드(Light Emitting Diodes: LEDs)의 온도와 p-n접합부 온도는 각각 $64.5^{\circ}C$와 $79.1^{\circ}C$이다. 열전소자의 입력 전력 0.1~0.2 W에 대하여, LED의 온도와 접합부 온도는 각각 $54.2^{\circ}C$와 $68.9^{\circ}C$로 낮아진다. 열전소자에 입력 전력을 0.2 W 이상으로 증가할수록, LED의 온도와 접합부의 온도가 상승한다. 이는 열전소자에 의하여 흡수된 열이 LED로 역류하기 때문이다. 따라서 열전 소자의 냉각기능을 유지하기 위하는 열의 역류를 제어하여야 하며, 열의 역류는 LED의 온도와 방열장치의 온도 차가 클수록 커진다.

• 한국전기전자재료학회논문지
• /
• 제24권3호
• /
• pp.234-239
• /
• 2011

In this study, the heat transfer capability have been improved by using via-holes in FR4 PCB, when the LED lighting is designed to solve the thermal problem. The thermal resistance and junction temperature were measured by changing the dimension of FR4 PCB and size of via hole. As a result, when the dimension was increased initially, the thermal resistance and junction temperature was decreased rapidly, the ones was stabilized after the dimension of 200 $[mm^2]$. Also, the light output was improved up to maximum 17% by formation of via-hole and expansion of dimension in FR4 PCB. Therefore, the thermal resistance and junction temperature could be improved by expansion of PCB dimension and configuration of via-hole ability.