• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.11
• /
• pp.14-25
• /
• 2011

Full-Color LED lighting system requires efficient control of the lighting color in order to easily achieve various color effects. In this paper, we present not only a portable color scanner using color sensors which can control lighting color directly from detected color but also methods to convert detected color to a complementary color, similar colors and so on. In addition, we propose a compensation method for measured sensor color to reduce measurement errors more than 50[%] in detected color. The developed color scanner is applied to control full-color LED ceiling light for emotional lighting.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.69-73
• /
• 2014

Recent interest in the worldwide energy to increase, and energy savings of the energy for effective operation of the IT technology there is a demand. By using a low-power LED energy efficient energy use worldwide for a variety of studies have been conducted. In Korea, 20-30% of the domestic electricity consumption corresponding to the illumination in order to conserve energy used by various sensors associated with illumination control studies are underway. That is the next generation of energy began to pay attention to the LED light source, LED and Arduino In this paper, an ultrasonic sensor to control and want to maximize the energy efficiency of the management. Paper, the user is directly operating the separate controller that controls the LED light, instead of being recognized through human body detection LED light on / off to control the experiment and study verified. In this paper, we develop an interface that also allows them to maximize the efficiency of energy management and efficiency, accompanied by expansion of commercialization can be achieved.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1149-1153
• /
• 2006

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.8
• /
• pp.390-396
• /
• 2002

This paper Presents to choose number of RGB LED through optical special quality analysis of RGB LED samples and to produce ratio of RGB LED for a stable color variation and white light. Also, it is to design of a simple switching circuit using some resistances and switching transistors that is able to operate each 16 RGB LED stably, and switching control circuit base on a microcontroller that would be suitable for colors variation patterns control more than about 64 patterns and colors variation more than about 100,000 colors using ON/OFF and Duty control.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.579-586
• /
• 2015

In this paper, we design and implement a lighting system which has a capability of adjusting brightness and colors of LED module. The lighting systems is consisted of RGB and white LEDs controlled by a micro-processor. All colors in nature can be synthesized in our lighting system by controlling brightness of 4 color LEDs individually. The current flowing to LED is limited to a maximum set value to extend the LED life time using PWM current control. The control module also includes the function that it can save and load brightness and color data set by the user. The implemented lighting system passed the electromagnetic compatibility(EMC) test such that it can be used as a commercial product.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.181-187
• /
• 2015

In this study, an LED emotional lighting algorithm optimized to the situation was implemented using fuzzy inference for users in exercise and resting situations in indoor environment. The fuzzy theory was used instead of the conventional simple color temperature control in order to control the colors and color temperatures of LED light sources in line with user environment under complex conditions. An LED emotional lighting system based on fuzzy theory was designed through a combination of colors according to the color and temperature of emotional language based on the user behavior. As a result, the color and color temperature can give a good effect on user's emotions for an emotional lighting that is effective for resting and exercise.

• Journal of Bio-Environment Control
• /
• v.25 no.1
• /
• pp.57-62
• /
• 2016

This study was conducted to find out the influence of red LED (Light Emitting Diode) lighting on the photosynthesis, vegetative growth and fruit quality of 'Fuji'/M.26 adult apple tree during night after sunset. The photosynthetic rate, stomatal conductance and transpiration rate at daytime of red LED treatments was not different to those of the control. However, the stomatal conductance and transpiration rate at the nighttime of red LED treatments were lower than those of the control, and the red LED lighting during night after sunset was not induce to photosynthesize at nighttime. In the leaf characteristics, the red LED lighting seemed to increase leaf area and C/N ratio, but decrease SPAD value. The bourse shoot length of the red LED treatments was shorter than that of the control. In the fruit quality, the red LED lighting seemed to increase ethylene production, respiration rate, soluble solid content and fruit red color, and especially the fruit red color tend to increase as the red LED lighting time was longer. In conclusion, the red LED lighting during night after sunset of 'Fuji'/M.26 apple tree promoted the fruit maturation.

• Journal of Convergence for Information Technology
• /
• v.11 no.12
• /
• pp.90-96
• /
• 2021

In this paper, we designed manufactured and design an integrated interface control unit that has compatibility with brightness control unit, color control unit, and existing control unit. As the implementation method the standard of DVI/HDMI transmission method is applied to the data transmission method, and the Sil 1169 IC is used as the applied IC. Brightness control is programmed to have eight levels of brightness control using the AT89C2051. Also, EPM240T100C5 IC was used for image and dimming data processing. As a result, it is compatible with the control unit using the DVI/HDMI transmission method manufactured by each company and can reproduce clear high quality full HD video according to the surrounding brightness through the full color LED display system.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.326-333
• /
• 2014

This study was conducted to investigate the fishing efficiency of an improved LED fishing lamp for squids. A total of 31 fishing operations were carried out with six-crew commercial fishing vessel Haengbok-Ho (24 tons) on which 43.2kW LED was installed, along with 14 automatic jigging machines, from October 6 to November 16, 2012. The 19 fishing vessels with Haengbok-Ho were compared with a control subject was 24 tons or 29 tons. A total illuminating power of metal halide (MH) fishing lamps in the control fishing vessel was either 84kW or 120kW. The number of automatic jigging machines in the control vessels was 8-18 and the number of crews engaged for fishing operation was 3-13. Average fuel consumption of LED fishing vessels during fishing operation was 505.1l which led to an average fuel consumption of 42.7l per hour. LED fishing vessel and MH fishing vessel caught on an average 1,946 squids and 2,439 squids, respectively, during the study period. Crews (hand line and hand reel) caught about 2.2 times the automatic jigging machines for LED fishing vessel and about 2.1 times for MH fishing vessel. Meanwhile, catches by the fishing vessels with LED in the combined total number per one line of automatic jigging machine and per crew were 86.6% of that of the control fishing vessel with MH. Also, fishing vessels with LED per automatic jigging machine achieved 71.8% of catches of that with MH fishing lamp. The catches of squids per the fishing vessel with 1W LED fishing lamp were higher by more than 135.5% of that in the fishing vessel with MH, which showed a good fishing performance even with only the use of a LED fishing lamp.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.487-492
• /
• 2012

In this study we researched a spotlight in LED lighting. Ordinary LED spotlight was manufactured with characterized property of traveling straightness of LED light source, but multiple use of shell type LED, a yellow band has formed caused by light source interference between the LED. Also, there was a high miscellaneous light efficiency with losing light source homogeneity and efficiency due to light source control uneasiness. The study uses aspheric reflector and aspheric lens, so we can control the light source of LED spotlight with effectively and we reached surface light source by using COB/COM for LED module. Furthermore it can change its use by a reduced scale of light system. It has been designed to make its various application from low power consumption of bicycle lamp, up to high power consumption of automobile lamps and lighthouse.