• The Journal of Sustainable Design and Educational Environment Research
• /
• v.16 no.3
• /
• pp.69-76
• /
• 2017

Indoor Air Quality(IAQ) affects physical and mental state of person who is residing indoor. Also, it manages daily life condition of Indoor Air in the building. According to the study, office workers spend 23 hours and 12 minutes, about 97% of his/her day indoor. Therefore, Indoor air quality affects not only the health of the person whose staying inside for a long hours but also the productivity and efficiency of work. This study conduct investigations on employees' awareness of indoor air quality of office in university. By doing so, we are able to determine current situation and provide basic data of improvement for derived problems. As a result, most of the respondents were not satisfied with ventilation and moisture which are elements of Indoor Air Quality. These led people to struggle with symptoms of health. Therefore, to improve the indoor air quality of a university office, it is necessary to exchange the air six times an hour according to recommendation of Refrigeration and Air Conditioning Engineers (ASHRAE)in the United States. Also, plan for Ventilation system that consider temperature, humidity and air flow indoor shall be provided for high quality conformability. furthermore, It is necessary to consider the multilateral in factors of generation of revenue through health care savings of workers and improvement of productivity.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.2
• /
• pp.357-368
• /
• 2018

For well over 100 years, oil has enabled remote communities to generate electricity and enjoy the benefits of a consistent electrical supply. Relying solely on oil for electricity generation has left island and remote communities exposed to several risks and drawbacks. Oil-based electricity generation is often more expensive and subject to price volatility, which can result in the use of risky fuel hedging strategies. The residents of islands and remote communities express concern over the future impacts of climate change or insist on their opinions for the corresponding action with reduction of carbon emissions. These risks and drawbacks can be overcomed with continuing cost reductions in solar, wind, and energy storage technologies by maker. Reducing costs is not always a straightforward process, relying on more diversely and renewably arranged renewable energy sources led to reduced local construction cost in every situation reviewed in this study. In this paper, a convenient and simple design solution which will facilitate the optimum location and transmission route of renewable energy facility using GIS(Geographic Information System) is proposed. The suggested solutions exercised to the case of geomoon island using GIS and identified by local site survey.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.12
• /
• pp.1765-1772
• /
• 2002

Three experiments were conducted to determine the feed processing method best suited for early and conventionallyweaned pigs, and to investigate the effects of different extrusion temperatures on ileal digestibility of amino acids in diets containing different protein sources. In exp.1, a total of 108 pigs (Landrace${\times}$Yorkshire${\times}$Duroc; 24 d of age and 7.60 kg average body weight) were alloted on the basis of sex, weight and ancestry to three treatments in a randomized complete block design. Feed processing methods used were mash (M), simple pellet (SP), and expanded pellet (EP). In exp. 2, a total of 96 pigs (Landrace${\times}$Yorkshire${\times}$Duroc; 14 d of age) were allotted on the basis of sex, weight, and ancestry to three treatments in a randomized complete block design. Diets were mash (M), expanded pellet (EP), and expanded pellet crumble (EPC). In exp. 3, a study was designed to investigate the effect of different extrusion temperatures (100, 120, and $140^{\circ}C$) over the control (untreated) on the ileal digestibility of amino acids in diets containing protein sources such as spray-dried plasma protein (SDPP), whey protein concentrate (WPC), and fish meal (FM). Results in exp.1 showed that ADG, ADFI and the F/G ratio of pigs fed the SP diet were improved (p<0.05) compared with those fed the M or the EP diets, but the digestibility of nutrients was not different (p>0.05) among the treatments. In exp. 2, pigs fed expanded pellet treatments (EP or EPC) had a significantly improved (p<0.05) F/G ratio compared to the pigs fed the M diet which was primarily attributed to the significant reduction (p<0.05) in ADFI, but the overall growth rate of pigs fed expanded pellet diets was not improved. In exp. 3, there was a significant interaction effect (p<0.05) between the extrusion temperature and protein source on the ileal digestibility of amino acids. With an extrusion temperature of $100^{\circ}C$, the ileal digestibility of Lys, Val, Gly and Ser was significantly lower in the diet containing WPC compared to the diet containing SDPP. Increasing the temperature to $120^{\circ}C$ led to significant differences (p<0.05) in the digestibility of Thr and Tyr between diets containing WPC and SDPP. Regardless of extrusion temperatures, the weaned pigs' diet containing either SDPP or FM had significantly higher Lys, Phe, Thr, Val, and Gly digestibility relative to the WPC diet. Results of the present study suggest that simple pelleting of diets containing protein sources such as whey protein concentrate, spray-dried plasma protein and fish meal would be better than the extruded or expanded pellet diets. Extruder or expander processing of weaned pigs' feed could reduce palatability and ileal digestibility of several amino acids and therefore may be responsible for a negative growth response in weaned pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.10
• /
• pp.1495-1499
• /
• 2017

Objective: This study aimed to investigate the effects of enrichment resources (a perch, dustbath, and nest) layout in furnished laying-hen cages (FC) on exterior quality of eggs. Methods: One hundred and sixty-eight (168) Hy-Line Brown laying hens at 16 weeks of age were randomly distributed to four treatments: small furnished cages (SFC), medium furnished cages type I (MFC-I), medium furnished cages type II (MFC-II), and medium furnished cages type III (MFC-III). Each treatment had 4 replicates or cages with 6 hens for SFC (24 birds for each SFC) and 12 hen/cage for MFC-I, -II, and -III (48 birds for each MFC-I, -II and -III). Following a 2-week acclimation, data collection started at 18 weeks of age and continued till 52 weeks of age. Dirtiness of egg surface or cracked shell as indicators of the exterior egg quality were recorded each week. Results: The results showed that the proportion of cracked or dirty eggs was significantly affected by the FC type (p<0.01) in that the highest proportion of cracked or dirty eggs was found in MFC-I and the lowest proportion of dirty eggs in SFC. The results of this showed that furnished cage types affected both dirty eggs and cracked eggs (p<0.01). The results also indicated that not nest but dustbath lead to more dirty eggs. Only MFC-I had higher dirty eggs at nest than other FC (p<0.01). The results of dirty eggs in MFC-I and MFC-II compared with SFC and MFC-III seemed suggest that a low position of dustbath led to more dirty eggs. Conclusion: SFC design affected exterior egg quality and the low position of dustbath in FC resulted in higher proportion of dirty eggs.

• Journal of Practical Engineering Education
• /
• v.12 no.1
• /
• pp.117-125
• /
• 2020

According to the government's smart factory promotion project for small and medium-sized enterprises, more than 10,000 intelligent factories are scheduled or already built in the country and the government-led goal is to nurture 100,000 skilled workers by 2022. Smart Factory introduces numerous types of education and training courses from the supplier's point of view, such as training institutions belonging to local governments, some universities, and public organizations, in the form of an efficient resource management system and ICT technology convergence in the automated manufacturing equipment. The lack of linkage with the NCS, the standard for training, seems to have room for rethinking and direction. Results of survey is provided for the family companies of K-University in the metropolitan area and Chungnam area, and analyzes job demands by identifying whether or not they want to introduce smart factories. Defining the practitioners who will serve as a window for the introduction of smart factory technology within the company, setting up a training goal in consideration of the career path, and including the level of training required competency units, optional competency units, and training time suitable for introducing and operating smart factories. Author would like to present an NCS-based qualification design plan.

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.1049-1064
• /
• 2005

The demands of increasingly complicated software have led to the proliferation of object-oriented design methodologies in embedded systems. To execute a system designed with objects in target hardware, a task set should be derived from the objects, representing how many tasks reside in the system and which task processes which event arriving at an object. The derived task set greatly influences the responsiveness of the system. Nevertheless, it is very difficult to derive an optimal task set due to the discrepancy between objects and tasks. Therefore, the common method currently used by developers is to repetitively try various task sets. This paper proposes Scenario-based Implementation Synthesis Architecture (SISA) to solve this problem. SISA encompasses a method for deriving a task set from a system designed with objects as well as its supporting development tools and run-time system architecture. A system designed with SISA not only consists of the smallest possible number of tasks, but also guarantees that the response time for each event in the system is minimized. We have fully implemented SISA by extending the ResoRT development tool and applied it to an existing industrial PBX system. The experimental results show that maximum response times were reduced $30.3\%$ on average compared to when the task set was derived by the best known existing methods.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.1
• /
• pp.64-75
• /
• 2009

The shipbuilder's requirement for a higher power output rating has led to the development of a super large two stroke low speed diesel engines. Usually a large-sized bore engine ranging from $8{\sim}14$ cylinders, this engine group is capable of delivering power output of more than 100,000 bhp at maximum continuous rating(mcr). Other positive aspects of this engine type include higher thermal efficiency, reliability, durability and mobility. This plays a vital role in meeting the propulsion requirement of vessels, specifically for large container ships, of which speed is a primary concern to become more competitive. Consequently, this also resulted in the modification of engine parameters and new component designs to meet the consequential higher mean effective pressure and higher maximum combustion pressure. Even though the fundamental excitation mechanisms unchanged, torsional vibration stresses in the propulsion shafting are subsequently perceived to be higher. As such, one important viewpoint in the initial engine design is the resulting vibration characteristic expected to prevail on the propulsion shafting system(PSS). This paper investigated the torsional vibration characteristics of these super large engines. For the two node torsional vibration with a nodal point on the crankshaft, a tuning damper is necessary to reduce the torsional stresses on the crankshaft. Hence, the tuning torsional vibration damper design and compatibility to the shafting system was similarly reviewed and analyzed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.120-131
• /
• 2005

Statement of problem. More than 70% of patients who need the implant supported restoration are parially edentulous. The principles of design for implant supported fixed partial denture in mandibular posterior region are many and varied. Jurisdiction for their use is usually based on clinical evaluation. There are several areas or interest regarding the design of implant supported fixed partial denture in mandibular posterior region. 1) Straight and tripod configuration in implant placement, 2) Two restoration types such as individualized and splinted restorations. Purpose. The purpose of this study was to compare the amount and distribution of stress around the implant fixtures placed in the mandibular posterior region with two different arrangements and to evaluate the effects of splinting using the photoelastic stress analysis. Material & methods. 1) Production of study model: Mandibular partially edentulous model was waxed-up and duplicated with silicone and two models were poured in stone. 2) Fixture installation and photoelastic model construction: Using surveyor(Ney, USh), 3 fixtures(two 4.0 $\times$13 mm, one 5.0$\times$10 mm, Lifecore, USA) were insta)led in straight & tripod configurations. Silicone molds were made and poured in photoelastic resin (PL-2. Measurements group, USA). 3) Prostheses construction: Four 3-unit bridges (Type III gold alloy, Dongmyung co., Korea) were produced with nonhexed and hexed UCLA abutments and fitted with conventional methods. The abutments were tightened with 30 Ncm torque and the static loads were applied at 12 points of the occlusal surface. 4) Photoelastic stress analysis : The polarizer analyzer system with digital camera(S-2 Pro, Fujifilm, Japan) was used to take the photoelastic fringes and analysed using computer analysis program. Results. Solitary hexed UCLA restoration developed different stress patterns between two implant arrangement configurations, but there were no stress transfer to adjacent implants from the loaded implant in both configurations. However splinted restorations showed lesser amount of stresses in the loaded implants and showed stress transfer to adjacent implants in both configurations. Solitary hexed UCLA restoration with tripod configuration developed higher stresses in anterior and middle implants under loading than implants with straight configurations. Splintied 3 unit fixed partial dentures with tripod configuration showed higher stress development in posterior implant under loading but there were no obvious differences between two configurations. Conclusions. The tripod configuration of implant arrangement didn't show any advantages over the straight configuration. Splinting of 3 unit bridges with nonhexed UCLA abutments showed less stress development around the fixtures. Solitary hexed UCLA restoration developed tilting of implant fixture under offset loads.

• Journal of the Korean Chemical Society
• /
• v.62 no.5
• /
• pp.398-411
• /
• 2018

The purpose of this study is to investigate the effects of research project activities using the science writing heuristic on science inquiry abilities and attitudes toward science in high school students. For this purpose, we conducted the research project activities using the science writing heuristic consisting of questioning, experimental design, observation, argument and evidence, reading, and reflection steps for 73 students of the second year of science core course in high school in Jeonnam. In order to analyze the effects of the program, we surveyed the scientific inquiry ability and attitude toward science, investigated the perception of the research project class applying science writing heuristic, and conducted interviews when there was difficulty in interpreting the results. And the results of this study are as follows. First, among the science inquiry abilities, the score of Reasoning, Hypothesis setting, Finding variables, Operational definition, Experimental design, Graphing and data interpretation, Generalization was significantly improved statistically (p<.05), but the score of Expectation was not statistically significant (p>.05). Second, among the attitudes toward science, the score of 'Leisure interest in science', 'Enjoyment of science lessons', 'Career interest in science' was significantly improved statistically (p<.05). And the score of 'Attitude to scientific inquiry' decreased but it's not significant statistically. The high school research project applying science writing heuristic had a positive effect on scientific inquiry ability and scientific attitude but it could be burden to students because it is led by students in a form different from general science class for a long time. And so continuous study on research project that minimize these disadvantages and maximize their merits is needed.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.14 no.2
• /
• pp.12-25
• /
• 2015

This study is currently presenting a creative education policy through the new 2015 revised curriculum and the Free semester system of Middle School as part of the education policy reform in the government-led, high freedom grade in each regional school board first, emotional schools, friendly school, campus type schools, etc. with creative thinking and improve students' autonomous judgment with the psychological and political reasons meant to provide amusement and certainty of their career choice. This creates space for creative education through the theoretical understanding of the educational philosophical thinking on creativity was to identify the appropriate means of educational space. The purpose of this study was to extract the linkage to produce creative educational environment that is generated through the philosophical thinking of the historical and psychological analysis of creativity with a human being. Future school construction has a future-oriented task should create a creative learning space in the center of the member schools. This creates space for creative education through the theoretical understanding of the educational philosophical thinking on creativity was to identify the appropriate means of educational space. Therefore Philosophical Thinking Creative School of members through the grounds centric collaboration focused on convergence enemy curriculum and school creative autonomy of operation which is central educational environment, that is diversified assistance as an attribute of the environment, space, space, flexible outdoor space, linking enemy center space, different types and sizes of the space case situation, the open space and spatial fusion can be seen the configuration doeeojim with different training space element.