• Health Policy and Management
• /
• v.34 no.2
• /
• pp.163-177
• /
• 2024

Background: This study aims to examine changes in fraudulent claim counts and total reimbursements before and after enhancements in counterfeit claim controls and monitoring of provider claim patterns under the "Proactive self-audit pilot program of fraudulent claims." Methods: This study used the claims data and hospital information (July 2021-February 2022) of the Health Insurance Review and Assessment Service. The data was collected from 1,129 hospitals assigned to the pilot program, selected from the providers who filed a claim for reimbursement for intravenous injections. Paired and independent t-tests, along with regression analysis, were utilized to analyze changing patterns and factors influencing claim behaviors. Results: This program led to a reduction in the number of fraudulent claims and the total amount of reimbursements across all levels of hospitals in the experimental groups (except for physicians below 40 years old). In the control group, general hospitals and hospitals demonstrated some significant decreases based on the duration since opening, while clinics showed significant reductions in specified subjects. Additionally, a notable increase was observed among male physicians over the age of 50 years. Overall, claims and reimbursements significantly declined after the intervention. Furthermore, a positive correlation was found between hospital opening duration and claim numbers, suggesting longer-established hospitals were more likely to file claims. Conclusion: The results indicate that the pilot program successfully encouraged providers to autonomously minimize fraudulent claims. Therefore, it is advised to extend further support, including promotional activities, training, seminars, and continuous monitoring, to nonparticipating hospitals to facilitate independent improvements in their claim practices.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.18-18
• /
• 2017

ISO11783은 농업 산업분야 통신 프로토콜의 국제 표준으로, 농용트랙터 및 작업기 ECU 간의 통신 프로토콜을 표준화한다. 이 표준은 서로 다른 제조사의 제품 간에 호환성을 갖게 하며, 정밀 농업에 대한 핵심 기반을 제공한다. 현재 해외에서는 이미 ISO11783 기반의 AFS(Advanced Farming System)를 통한 정밀농업이 상용화되어 농가에 보급되고 있다. 이에 비해, 국내에서 이러한 표준을 따르는 농기계들은 미비한 실정이며, 향후 농업의 정밀 농업화를 통한 고부가가치 창출 및 선진국의 무역 장벽에 대비와 해외 수출 판로 개척을 위해 ISO11783 표준에 대한 R&D가 필요로 한다. 이에 IsoAgLib를 분석하고 임베디드 보드에 Porting하여 ISO11783 기반 작업기 ECU를 구현하였고, 이를 기반으로 ISO11783 기반 작업기 ECU의 구현 방법을 발표한다. IsoAgLib의 시스템 아키텍처는 계층화 되어 있어, 타겟에 의존적인 계층만 수정하여, IAR 환경에서 Cortex M3 보드에 포팅을 완료하였다. 작업기 ECU들은 자신만의 인터페이스 화면을 갖으며, 이를 Object pool이라 한다. 이것을 Virtual Terminal(VT)에 업로드 하여, VT가 해당 작업기 ECU의 사용자 인터페이스 기능을 제공하도록 한다. 이에 작업기 ECU 구현 1 단계로, 'VT-Designer'를 통하여 Object pool를 설계한다. 2 단계, 'vt2iso'를 통해서 Object pool을 IsoAgLib 상에서 사용할 수 있도록 변환한다. 3 단계, 포팅된 IsoAgLib project에 변환된 파일을 포함 시킨다. 4 단계, 작업기 ECU의 주기적인 작업 및 각 메시지 수신시 수행할 작업을 코딩한다. 5 단계, 빌드 및 타겟 보드에 업로딩 한 후, New Holland 사의 $Intelliview^{TM}$ iv display (VT)과 연결하여 동작을 확인한다. 확인 결과로 VT에 디자인한 Object pool이 표시 되며 soft key 입력 시 작업기 ECU에서 LED가 변한다. 결론적으로, 연구 결과를 바탕으로 ISO11783 기반의 작업기 ECU의 디자인 및 구현이 가능하며, 이를 통해 향후 국내의 ISO11783 기반의 작업기 ECU의 개발에 도움을 줄 수 있다.

• The Journal of Engineering Geology
• /
• v.13 no.3
• /
• pp.321-334
• /
• 2003

This study is aimed at the effective measurement plan of discontinuity orientation on rock mass. The discontinuity orientation is expressed as three methods. strike/dip. dipdirection/dip (a three digit number / a two digit number) and right hand rule. Generally, strike/dip is measured with clinometer. and dipdirection/dip with silva compass(type15). A sign of strike/dip. discontinuity orientation is used to geological survey. and dipdirection/dip to engineering. Dipdirection/dip converted by strike/dip measured with clinometer is useful on the statistical analysis of a lot of data. To measure the azimuth of the dip with clinometer and to change strike/dip to dipdirection/dip may have potential errors in each person. The newly designed apparatus, clinometer equipped by a rotational azimuth plate and an arrow to measuring strike and dipdirection, has been developed to measure effectively the discontinuity orientation with two method (strike/dip and dipdirection/dip). The measuring method of discontinuity orientation with clinometer having newly designed apparatus is effective one for accurate measurement of strike as well as dipdirection which is degrees counted clockwise from true north. Used by clinometer with newly designed apparatus, concurrent measuring strike/dip and dipdirecton/dip of discontinuity is possible. In application to measuring discontinuity orientation on rock slope, it has been recognized that the newly designed method, unambiguously, led to drop measuring errors comparing with existing measuring apparatuses. Therefore, it is considered that measuring method of discontinuity orientation (strike/dip and dipdirecton/dip) by the newly designed apparatus is useful to one in geological engineering investigation of road design, and to unskilled investigator.

• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.426-430
• /
• 1985

The effects of temperature on the visual color deterioration of Lithospermi radix were investigated under steady conditions of various pH and temperature. The changes of Hunter L, a, b, and ${\Delta}E$ values related to the color deterioration were sharply increased above $50^{\circ}C$ and the deteriorations were expressed linear relationships with the temperature above $60^{\circ}C$. Linear regression coefficients of Hunter L, a, b values decreased with an increase of heat treatment time, whereas the color difference was increased. The linear regression coefficients of Hunter L, a, b, ${\Delta}E$ values in 66.7% ethanol extract solution of Lithospermi radix for 1 hr were -0.3696, -0.4124, -0.2279, and 0.5983, respectively. Inear regression coefficients in color difference (${\Delta}E$) could be calculated from the coefficients in Hunter L, a, b values. The low pH treatment of extract from pH 6.07 to pH 1.35 led to decrease of Hunter a value and a little increase of Hunter L, b values, but the high pH treatment above pH 6.07 decreased all Hunter values. Particularly, the visual color of the extract of Lithospermiradix was appeared to be faborable at pH 4.0-6.5, which was a bright red color.

• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.141-152
• /
• 2014

The user interfaces of electronic-book (e-book) readers in the e-book market are highly diverse, and this has led to major usability issues. In this paper, we analyze user preferences in terms of feature-setting options and the use of touchscreen actions in the six most commonly used e-book readers for smartphnoes. We identify alternatives for these features, which can enhance the usability of e-book readers, based on these user preferences. The survey results for the feature-setting options show that it is desirable to support at least eight background colors, as well as the ability to specify the color of the background icons. Adjusting the screen brightness using a setting bar with the support of an auto-brightness option is desirable, as in using +/- buttons to adjust the font size, as well as approximately 10 font faces. We find that it is desirable to support fade, slide, scroll and curl page-turing options, in addition to a simple non-animated page-turning effect, and that page movement should be accomplished using a scroll bar with the support of the page movement features by entering a page number, and by using the table of contents as well as bookmarks. The survey results on the use of touchscreen options indicated that it is useful to be able to configure the screen layout of an e-book reader by dividing it into three areas: left, right, and center. And then, when users briefly touch the left and right areas, it is ideal to move to the previous and subsequent pages, respectively; and when they briefly touch the center region, it is desirable to display a touch feature menu. We believe that the results of this study may provide guidance in the design of user interfaces for e-book readers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.499-505
• /
• 2012

As the excavation depths during excavation works in urban sites are getting deeper and bigger, It is necessary to study for the improvements to solve the problems in the excavation processes. This research deals with the excavation method that can not only minimize the effect on the surrounding constructions, but also shorten the construction period of the excavation work. For this research, there have been an extensive literature review of the bibliographic data about Slurry Wall Method, which is recognized around the world, and the analysis of the major problems in the existing ineffective construction step. These efforts led to the technical improvements. Accordingly, a new construction method applied with the new technical factors has been suggested, and it was possible to compare Slurry Wall Method with the construction method and analyze them on the base of the examples using the suggested method. This new method decreased the excavation period by 15 days. It took only 33days to finish the excavation work, as compared to 48 days that can be seen on the pre-modification schedule. Furthermore, the suggested method in this research is safer, more economically feasible, and better for the environment than Slurry Wall Method. It will contribute to shortening the construction period of Slurry Wall Method in the end.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.42-48
• /
• 2016

Inundation Maps are used to predict potential areas of flooding through the signs of past flooding and flood inundation analysis for flooding expected in the future, and this has led to the development of various forms of disaster-related services by governments. However, each institution has its own individual scenarios for making maps for spatial expression. Therefore, the type of spatial information is not standardized and has many forms and structures. In this study, we attempted to design the metadata that would allow Inundation Map information to be shared and used in various fields. The international standard, ISO 19115, and the domestic standards, KS X ISO 19115, TTAS.IS - 19115 and TTAS.KO - 10.0139/R1 of TTA, were used in the design to derive an appropriate standard for comparative analysis by dividing into maintenance, constraints, metadata, spatial reference system, identification, and distribution. It is expected that inundation maps will be easier to utilize and distribute among institutions and private companies by systematically collecting and managing them through the metadata design based vector space information standard developed in this study.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.309-316
• /
• 2022

Advances in technology have improved people's lives comfortably and have developed more easily, safely and simply. We usually turn on hot water to set the temperature of the water in the bathroom and gradually adjust the temperature to find the temperature we want with our skin. In this situation, I thought, "What if there is a device that can see the temperature of water with my eyes and help with the interior of the bathroom while including a safe system," and tried to create a system that values stability. For example, if a child accidentally changes the temperature of the water to high temperature while washing, he or she can get burned. And the biggest purpose is to secure better safety by adding LCDs and LEDs so that we can visually know the temperature before feeling it tactilely. As a result of the experiment, there was no error between the temperature detected by the water temperature sensor and the temperature displayed on the LCD, and no error occurred up to 27 cm in the distance measurement experiment using the ultrasonic sensor. There has been an error of about 2% since 28cm or older, but there is no significant inconvenience in using it within the category of faucets.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.253-262
• /
• 2006

Research of color has been developed and also has raised consumer desire through changing from a tool to pursue curiosity or beauty to a tool creating effects in the 20th century. People have been interested in colors as a dynamic expression of results since the color TV appeared. The meaning of colors has been recently diversified as the roles of colors became important to the emotional aspects of design. While auto colors have developed along with such changes of the times, black led the color trend during the first half of the 20th century from 1900 to 1950, a transitional period of economic growth and world war. Since then, automobile production has increased apace with the rapid economic growth throughout the world and automobiles became the most expensive item out of the goods that people use. Accordingly, increasing production induced facility investment in mass production and a technology leveling was achieved. Auto manufacturing processes are very complicated, auto makers gradually recognized that software changes such as to colors or materials was an easier way for the improvement of brand identity as opposed to hardware changes such as the mechanical or design components of the body. Color planning and development systems were segmented in various aspects. In the segmentation issue, pigment technology and painting methods are important elements that have an influence on body colors and have a higher technical correlation with colors than in other industries. In other words, the advanced mixture of pigments is creating new body colors that have not existed previously. This diversifies the painting structure and methods and so maximizes the transparency and depth of body colors. Thus, body colors that are closely related to technical factors will increase in the future and research on color preferences by region have been systemized to cope with global competition due to the expansion and change of auto export regions.

• Sim-seong Yeon-gu
• /
• v.25 no.2
• /
• pp.194-223
• /
• 2010

I tried here to interpret german fairy tale "Three Dogs" from the aspect of analytical psychology. A poor young shepherd will be 'hero'accidently while wandering the world to find good luck. When he was exhausted and frustrated in wandering life, a stranger appeared before him. A stranger offered barter. So he exchanged three sheep with three black dogs which a stranger had. One dog can bring the food. Another dog can tear everything. The last one can break even steel and iron. After that, shepherd led a satisfactory wandering life. On the way, he met a sad princess who should sacrifice herself for the piece of the country to the dragon which swallows a young girl yearly. But the strong black dog which tears everything, killed the dragon and saved the princess from the sacrifice. After that, a young shepherd promised princess to come back to her after three years of wandering life. In the meanwhile a horse driver played hero false. But the princess couldn't reveal the truth because of the threat of horse driver. Three years later, the young shepherd appeared in the castle. But the true hero was caught in the prison and finally cried out the strongest dog and succeeded in escaping from the prison. And with help of another dog which bring food to him, he could meet the princess and finally married her. So they lived happy life for a long time. But he remembered the poor younger sister. So he wanted to live together with her. After that, three dogs left him with saying, they stayed to see whether he shares his good fortune with his younger sister. Then they turned into birds and disappeared in the air. In this fairy tale can we find many important symbols. With the amplification of symbols and the interpretation of this fairy tale in terms of Jung's analytical psychology, I tried to find the meaning of individuation process in this fairy tale. Hero kills the dragon which could symbolize negative mother archetype. After overcoming the negative mother complex, he could get princess which could be expressive of Anima. This marriage could symbolize coniunctio oppositorum, an important process in individuation. Each fairy tale tells us the individuation process in a different way. And the fairy tale works always in our mind with plain, simple, pure, crystal like nature. Through it can we take precious treasure like wisdom for life.