• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.1-8
• /
• 2008

Low Density Parity Check codes(LDPC) are recently focused on communication systems due to its good performance. The standard of WiBro has also included LDPC codes as a channel coding. The weak point of implementation for LDPC encoder is that conventional binary Matrix Vector Multiplier has many clock cycles which limit throughput. In this paper, we propose semi-parallel architecture by using cyclic shift registers and exclusive-OR without conventional Matrix Vector Multipliers over the standard parity check matrices with Circulant Permutation Matrices(CPM). Furthermore, multi-rate encoder is designed by using proposed architecture. Our encoder with multi-rate for IEEE 802.16e LDPC has lower clock cycles and higher throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2C
• /
• pp.123-129
• /
• 2006

In this paper, we concentrate on reducing the complexity for efficient encoder. We design structural LDPC code using circulant matrix and permutation matrix and eIRA code. It is possible to design low complex encoder by using shift register and differential encoder and interleaver than general LDPC encoder that use matrix multiplication operation. The code designed by this structure shows similar performance as random code. And the proposed codes can considerably reduce a number of XOR gates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.901-906
• /
• 2010

Low density parity check (LDPC) code, first introduced by Gallager and re-discovered by MacKay et al, has attracted researcher's interest mainly due to their performance and low decoding complexity. It was remarkable that the performance is very close to Shannon capacity limit under the assumption of having long codeword length and iterative decoder. However, comparing to turbo codes widely used in the current mobile communication, the encoding complexity of LDPC codes has been regarded as the drawback. This paper proposes a solution for DVB-S2 LDPC encoder to reduce the encoder latency. We use the fast IRA encoder that use the transformation of the parity check matrix into block-wise form and the partial parallel process to reduce the number of system clocks for the IRA code encoding. We compare the proposed encoder with the current DVB-S2 encoder to show that the performance of proposal is better than that of the current DVB-S2 encoder.

• Smart Media Journal
• /
• v.2 no.2
• /
• pp.39-43
• /
• 2013

In this paper, we suggest a new technique for WPC parity-check matrix (H-matrix) generation and a corresponding decoding process. The key idea is to construct WPC H-matrix by using a convolutional encoder. It is easy to have many different coderates from a mother code with convolutional codes. However, it is difficult to have many different coderates with LDPC codes. Constructing LDPC Hmatrix based on a convolutional code can easily bring the advantage of convolutional codes to have different coderates. Moreover, both LDPC and convolutional decoding algorithms can be applied altogether in the decoding part. This process prevents the performance degradation of short-length WPC code.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.10
• /
• pp.61-69
• /
• 2009

This paper presents the design results of a low complexity and high throughput LDPC encoder structure. In order to solve the high complexity problem of the LDPC encoder, a simplified matrix-vector multiplier is proposed instead of the conventional complex matrix-vector multiplier. The proposed encoder also adopts a partially parallel structure and performs column-wise operations in matrix-vector multiplication to achieve high throughput. Implementation results show that the proposed architecture reduces the number of logic gates and memory elements by 37.4% and 56.7%, compared with existing five-stage pipelined architecture. The proposed encoder also supports 800Mbps throughput at 40MHz clock frequency which is improved about three times more than the existing architecture.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.2
• /
• pp.196-201
• /
• 2013

In this paper, we proposed high speed LDPC encoder architecture for DVB-S2 standard. In conventional algorithm, the processes of parity calculations are serial fashion. Therefore conventional algorithm need clocks of number of parity. The proposed LDPC encoding architecture is based on a parallel 360 bits-wise operations. The key issues for realizing high speed are using the two kinds of index addresses and make use of memories efficiently. We implemented a half rate LDPC encoder on an FPGA, and confirmed its maximum throughput is up to 10 Gbps on 100MHz clock.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.252-254
• /
• 2007

In this paper, we will introduce an encoding algorithm of LDPC Codes in Direct-Sequence UWB systems. We evaluate the performance of the coded systems in an AWGN channel. This new algorithm is based on the Jacket matrics. Mathematically let A = ($a_{kl}$) be a matnx, if $A^{-1}$ = $(a^{-1}_{kl})^r$,then the matrix A is a Jacket matrix. If the Jacket matrices if Low density, the inverse matrices is also Low density which is very important to the introduced encoding algorithm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.831-835
• /
• 2020

By automatically generating HDL codes from C/C++ source codes, HLS makes it possible to shorten FPGA system developing period through easy timing control and structure change. We designed LDPC encoder for telemetry standard 106-17 with Xilinx Vivado HLS and showed hardware structure can be easily adapted for different purposes through minor C code modification. Synthesis results targeting Spartan-7 xc7s100 device are presented for throughput and hardware complexity comparison.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.419-426
• /
• 2014

This paper proposes a high-throughput encoding process and encoder architecture for quasi-cyclic low-density parity-check codes in IEEE 802.11ac standard. In order to achieve the high throughput with low complexity, a partially parallel processing based encoding process and encoder architecture are proposed. Forward and backward accumulations are performed in one clock cycle to increase the encoding throughput. A low complexity cyclic shifter is also proposed to minimize the hardware overhead of combinational logic in the encoder architecture. In IEEE 802.11ac systems, the proposed encoder is rate compatible to support various code rates and codeword block lengths. The proposed encoder is implemented with 130-nm CMOS technology. For (1944, 1620) irregular code, 7.7 Gbps throughput is achieved at 100 MHz clock frequency. The gate count of the proposed encoder core is about 96 K.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.55-58
• /
• 2004

This this paper, we propose vertical Bell laboratories layered space time (V-BLAST) system based on variable rate Low-Density Parity Check (LDPC) codes to improve performance of receiver when QR decomposition interference suppression combined with interference cancellation is used over independent Rayleigh fading channel. The different rate LDPC codes can be made by puncturing some rows of a given parity check matrix. This allows to implement a single encoder and decoder for different rate LDPC codes. The performance can be improved by assigning stronger LDPC codes in lower layer than upper layer because the poor SNR of first detected data streams makes error propagation. Keeping the same overall code rates, the V-BLAST system with different rate LDPC codes has the better performance (in terms of Bit Error Rate) than with constant rate LDPC code in fast fading channel.