• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.495-496
• /
• 2015

본 논문에서는 양수발전용 동기발전기의 기동 및 회생제어를 위한 부하전류형 인버터(LCI) 시스템을 Matlalb/simulink를 이용하여 모델링하고 제어방법을 확인하였다. 부하전류형 인버터의 구성 및 동작모드에 대해 서술하였으며, 동기발전기의 안정성 확보를 위한 회생제어 모드에 적합한 제어 방법을 제안하였다. 제안된 방법은 기존의 복잡한 제어구조와 달리 제어요소의 간략화로 제어의 강인성을 확보하였으며, 부하전류형 인버터 시스템의 기동제어 및 제안된 회생제어에 대한 성능은 시뮬레이션을 통해 검증하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.297-305
• /
• 2016

This study aims to analyze characteristics of environmental load for the construction phase of PSC beam bridge based on Life Cycle Assessment. For detail computation of environmental load, the construction materials and energy consumption are derived from the BOQ, also connecting with environmental load by Korea LCI Database Information Network. The characteristic of environmental impact was analyzed by 25 cases and cut-off ratio was 80% to 94%. The result sorted by construction materials revealed that environmental load were 53.3% for ready-mixed concrete, 9.6% for wire rod, 7.8% for rebar, 6.8% for cement, 5.5% for plywood, and 5.2% for energy. Furthermore, the result of environmental impact revealed that 45.5% for global warming, 30.4% for abiotic resources depletion, 10.5% for human toxicity, and 8.9% for photochemical oxidant creation. In the future, we can make a decision considering environmental load based on LCA at design phase.

• Journal of Korean Library and Information Science Society
• /
• v.48 no.1
• /
• pp.191-206
• /
• 2017

The purpose of this study is to compare the characteristics of research collaborations in the field of LIS. While there are several studies under the unit of analysis of country, there are only a few studies under the unit of analysis of institution in LIS field. For this analysis, we selected eight journals in the KCI (Korea Citation Index) web site, which correspond to the field of LIS through subject classification. The collaborative indices, Collaborative Coefficient, Co-Authorship Index, Local Collaborative Index (LCI), Domestic Collaborative Index (DCI) allowed us to comparatively analyze institutional collaboration patterns in LIS field. In the case of Chung-Ang University, Yonsei University, and Ewha Womans University, collaborative research among professors, graduate students, and professors reflected the fact that collaborations among universities are often performed with professors. In the case of KISTI, which showed a very high index value, the characteristics of project-based research are reflected in the research collaboration pattern.

• Journal of Society of Preventive Korean Medicine
• /
• v.22 no.2
• /
• pp.1-12
• /
• 2018

Objectives : Recently, the interest on medical education in flipped learning has been growing. Competency-based curriculum is also required through changes in teaching methods within the Korean medicine education. In this study, flipped learning method was applied to 'medical ethics' class to examine the perception and experience of flipped learning from the Korean medical student's perspectives. Methods : The study was conducted on 15 preparatory course freshmen students who took the 'medical ethics' course, in the second semester of the year 2017 at 'A' University. The study was proceded in two steps; 1) fill-in the questionnaire twice (before and after the class), and 2) in-depth interview with semi-structured questionnaire. The $1^{st}$ questionnaire in the first step was consisted of 'Experience on flipped learning before the class', 'Which section of the flipped learning class do participants have expectation', 'Interest and expectation on flipped learning'. In the $2^{nd}$ questionnare, the participants were asked 'Which section of the flipped learning section that the learning effect was maximized', 'Association between 'flipped learning' method and 'Medical ethics' course' with 5-point Likert scale and frequency. Results : The results showed that flipped learning method works very effectively in the 'medical ethics' course (63.6%). After the flipped learning class, the participants showed positive change in a attitude of the class (72.7%). However, this teaching method might be inappropriate for participants who had difficulties in pre-learning or a passive attitude and lecture-centered instruction (LCI) classes. Conclusions : Though applying flipped learning method to the 'Medical Ethics' was effective, to make pre-learning better, the instructors should prepare countermeasures for passive participants, help interact well among the participants, and plan a lesson thoroughly for changing LCI classes to student-centerd instruction(SCI).

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.5
• /
• pp.691-697
• /
• 2011

In this study, by using the Water footprint technique, the water consumption by washing machines, which holds higher ranks in using water than any other electric appliances, was analyzed during their life cycle. The life cycle is defined as raw materials production step, manufacturing step, and using step. In raw materials production step, Input materials were researched by using LCI DB(Life Cycle Inventory Database) and the water consumption was calculated with consideration of approximately 65% Input materials which were based weight. In manufacturing step, the water consumption was calculated by the amount of energy used in assembly factories and components subcontractors and emission factor of energy. In using step, referring to guidelines on carbon footprint labeling, the life cycle is applied as 5 years for a washing machine and 218 cycles for annual bounds of usage. The water and power consumption for operating was calculated by referring to posted materials on the manufacture's websites. The water consumption by nation unit was calculated with the result of water consumption by a unit of washing machine. As a result, it shows that water consumption per life cycle s 110,105 kg/unit. The water consumption of each step is 90,495 kg/unit for using, 18,603 kg for raw materials production and 1,006 kg/unit for manufacturing, which apparently shows that the using step consume the most water resource. The water consumption by nation unit is 371,269,584tons in total based on 2006, 83,385,649 tons in both steps of raw material production and manufacturing, and 287,883,935 tons in using step.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.6
• /
• pp.25-34
• /
• 2022

Recently, as a study to air cooled slag, which is an industrial by-product, research is being proceed to use it as a material for concrete. In this study, the workability, air content, compressive strength, CO₂ emission and economic feasibility of concrete were analyzed when air cooled slag, an industrial by-product, was applied as aggregate for rural road pavement concrete. As a result of the analysis, both the slump and air contents test results of concrete using the air cooled slag aggregate satisfied the target values, and the compressive strength was increased when the air cooled slag aggregate was used compared to when the natural aggregate was applied. On the other hand, the largest amount of CO₂ emission by raw material was found in aggregate. The carbon emission of rural road pavement concrete using air cooled slag aggregate increased when the Korean LCI DB was applied compared to when natural and crushed aggregates were applied, and the emission decreased when the German LCI DB was applied. This results are due to differences in the viewpoints of industrial by-products. However, considering the recycling of waste from the environmental aspect, it is necessary to simultaneously review the CO₂ emission and recycling aspects in the future. Also, the application of air cooled slag aggregate had the effect of improving the economic efficiency of rural road pavement concrete about 18.75%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1143-1152
• /
• 2012

We established a top-down methodology to estimate carbon footprint as national mean value (reference) with the statistical data on agri-livestock incomes in 2007. We also established LCI (life cycle inventory) DB by a bottom-up methodology with the data obtained from interview with farmers from 4 large-scale farms at Gunsan, Jeollabuk-do province to estimate carbon footprint in 2011. This study was carried out to compare top-down methodology and bottom-up methodology in performing LCA (life cycle assessment) to analyze the difference in GHGs (greenhouse gases) emission and carbon footprint under conventional rice cultivation system. Results of LCI analysis showed that most of $CO_2$ was emitted during fertilizer production and rice cultivation, whereas $CH_4$ and $N_2O$ were mostly emitted during rice cultivation. The carbon footprints on conventional rice production system were 2.39E+00 kg $CO_2$-eq. $kg^{-1}$ by top-down methodology, whereas 1.04E+00 kg $CO_2$-eq. $kg^{-1}$ by bottom-up methodology. The amount of agro-materials input during the entire rice cultivation for the two methodologies was similar. The amount of agro-materials input for the bottom-up methodology was sometimes greater than that for top-down methodology. While carbon footprint by the bottom-up methodology was smaller than that by the top-down methodology due to higher yield per cropping season by the bottom-up methodology. Under the conventional rice production system, fertilizer production showed the highest contribution to the environmental impacts on most categories except GWP (global warming potential) category. Rice cultivation was the highest contribution to the environmental impacts on GWP category under the conventional rice production system. The main factors of carbon footprints under the conventional rice production system were $CH_4$ emission from rice paddy field, the amount of fertilizer input and rice yield. Results of this study will be used for establishing baseline data for estimating carbon footprint from 'low carbon certification pilot project' as well as for developing farming methods of reducing $CO_2$ emission from rice paddy fields.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.141-147
• /
• 1997

The variable speed drive system of a electric motor is popular in industry due to its economical aspect and simplicity of implementation, comparing with a steam turbine or the other engine driven. For a large pumping load like a feedwater pump rated about or more than 20,000㎾, a synchronous motor could be primarily considered. In this paper, we studied the modelling of a variable speed drive system consisted with a load commutated inverter(LCI) and a brushless sailent pole rotor synchronous motor(SM) using MATLAB/SIMULINK. Simulation was performed with a small SM motor parameters.

• Korean Journal of Construction Engineering and Management
• /
• v.3 no.4 s.12
• /
• pp.139-144
• /
• 2002

Management of today's dynamic projects requires a shift of focus from product to process. The purpose of traditional project controls is to conform performance to plan. The purpose of lean project controls is to make the best possible choices at each point in time during the course of the project, as well as contributing knowledge to the parent organizations so they can learn from project experience. The Lean Construction Institute(LCI) proposed the Last Planner System(LPS) capable of accomplishing that purpose, principally through controlling the quality of planning and of management processes themselves, as distinct from concentrating exclusively on project performance. The case project was a pilot project for the implementation of the Last Planner. Consequently, the coordination of the work on this project was extremely successful. The project had its share of challenges. The coordination did not prevent design problems, or supplier errors, but helped the team deal with the problems effectively while maintaining the work flow. The last planner helped the contractors know: a) who will be doing what and where, b) what each one needs from the others, and c) what are the project priorities. The system itself created a more collaborative environment, because it 'demands' that the subcontractors address these issues.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.1
• /
• pp.84-89
• /
• 2005

This paper presents a control algorithm for a large salient-pole synchronous motor fed by a Load Commutated Inverter (LCI). Many papers have been presented in the past few years on the justification, design, and application of variable-speed drive. The focus of this paper is on high torque operation and the estimation of initial rotor position. The results of simulation indicate that it is possible to produce the maximum torque and estimate the initial rotor position.