• Journal of Information Display
• /
• v.5 no.2
• /
• pp.1-5
• /
• 2004

We developed an a-Si TFT-LCD panel with integrated gate driver circuit using a standard 5-MASK process. To minimize the effect of the a-Si TFT current and LC's capacitance variation with temperature, we developed a new a-Si TFT circuit structure and minimized coupling capacitance by changing vertical architecture above gate driver circuit. Integration of gate driver circuit on glass substrate enables single chip and 3-side free panel structure in a-Si TFT-LCD of QVGA ($240{\times}320$) resolution. And using double ASG structure the dead space of TFT-LCD panel could be further decreased.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.383-388
• /
• 2004

In this paper an alternative Active Matrix LCD technology is described with scalable, low cost processing. The Dual Select Diode AMLCD requires 60% lower capital investment in the array process than a-Si TFT arrays and results in 20% lower cost LCD modules. Development at several AMLCD manufacturers is in progress.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.395-398
• /
• 2004

We developed an a-Si TFT-LCD panel with integrated gate driver circuit using a standard 5-MASK process. To minimize the effect of the a-Si TFT current and LC's capacitance variation with temperature, we developed a new a-Si TFT circuit structure and minimized coupling capacitance by changing vertical architecture above gate driver circuit. Integration of gate driver circuit on glass substrate enables single chip and 3-side free panel structure in a-Si TFT-LCD of QVGA(240$^{\ast}$320) resolution. And using double ASG structure the dead space of TFT-LCD panel could be further decreased.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.9-12
• /
• 2008

For the large-sized and post-ultra definition TFT-LCD, improved drivability is prerequisite not only for the integration of driving circuit on glass but also for the chargeability of each pixel. In order to meet required drivability, currently adopted process architecture and materials are modified for the RC delay reduction, including the drastic increase of gate bus thickness and its related solution for step coverage. We present new process architecture and material selection for the next generation TFT-LCD devices.

• Journal of Information Display
• /
• v.13 no.1
• /
• pp.17-20
• /
• 2012

The current panels for liquid crystal display (LCD) TV sets are all characterized by pins placed on two sides. To manufacture one type of panel, a dedicated mask is needed, and the production line should be started once. Moreover, the whole panel needs to be removed if a dead pixel is found. If the panel, however, will first be fabricated with pins placed on four sides and then divided by a cross-cut into four equal-sized panels with pins placed on two sides, one set of masks can be used to manufacture two types of LCD panels, which was referred to by the authors as dual mode. In this paper, the concept of the dual mode and its differences from the conventional way of producing panels are introduced. Its advantages in boosting production efficiency, improving the product's good rate, and lowering the production cost are also described based on case studies. Of particular importance is the fact that the dual mode is very suitable for the trial production of very-large-area LCD TV sets.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.851-854
• /
• 2008

In order to reduce the manufacturing cost of TFT LCDs and cut down an amount facilities invested, there are many LCD panel makers contributes to convert the current Five-mask manufacturing process into the noble Four-mask fabrication process. We optimized the slit mask to improve the poor process reliability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.281-285
• /
• 2006

Recently LG.Philips LCD (hereafter "LPL") has announced the development of the world's largest 100-inch TFT-LCD with Advanced Super IPS technology. This magnificent LCD achieves the feature of a full high definition resolution $1920{\times}1080(16:9)$, 600nit brightness, 3000:1 dynamic contrast ratio, 92% color gamut, 180 degree viewing angle, and 5msec response time at all grays, targeted for HDTV and public display applications. Some unique technologies such as Cu bus line, advanced wide view polarizer, and high color gamut lamp were applied. A new stitching free technology was developed to overcome the size limitation of photo mask in both the TFT and CF processes. The size of the panel (100-inch) based on the wide format (16:9) is determined by the maximum efficiency of world's $1^{st}$ seventh generation line (glass size:$1950{\times}2250mm$) in LPL's Paju display cluster. In this paper, we will discuss the issues of 100-inch TFT-LCD.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.132-135
• /
• 2003

핸드폰에 장착된 반투과형 LCD (Liquid Crystal Display) 패널에서 반사판을 제거하면 투과형 LCD 마스크로 이용할 수 있다. LCD 패널의 광 흡수 실험에서 얻은 스펙트럼을 참고하여 다양한 파장대의 광원으로 리소그래피 하였다. 컴퓨터 이미지 프로그램으로 편집한 그림을 핸드폰 전용 통신 케이블을 통하여 LCD 패널로 전송하여, 다양한 모양의 패턴을 기판위에 전사하는데 성공하였다. 픽셀간의 경계가 현상되어 끊어지는 패턴이 형성되는 LCD 마스크의 단점을 극복하여 연속적인 패턴결과를 얻는데도 성공하였다. 이로부터 프로젝션 리소그래피의 응용에 쉽게 접근할 수 있는 발판이 마련된 것으로 생각된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.489-492
• /
• 2001

We studied a method to use a variable discrete random phase mask in 2-D binary data representation for efficient holographic data storage. The variable phase mask is realized by use of a twisted nematic liquid crystal display.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.10 no.2
• /
• pp.49-52
• /
• 2006

Theses days, the thickness of Brown tube becomes thinner since the display products are rapidly replaced by PDP, LCD etc. Accordingly, the shadow mask part also become flat. We propose the method of designing the surface with crown since the flat surface is fragile to vibration and shock.