• 대한인간공학회지
• /
• 제28권4호
• /
• pp.61-69
• /
• 2009

With increasing needs for affective design, it became an essential part in a product development process to look up quantitative ergonomic data that reflects customers' preferences on design factors in various products. This study looked at wide LCD monitors and analyzed customers' affective preferences regarding monitor's bezel frame size and shape. The monitor's bezel frame depth, size and ratio were selected as independent variables among many design parameters. As dependent variables, customer's subjective preferences were measured. A statistical analysis revealed that monitor's bezel frame depth, size and ratio had significant effects on customer's preferences. Also, it was possible to find a different tendency on affective variables and their levels for 19" and 24" wide LCD monitors. In general, experiments revealed that customers reacted more sensitively in 24" wide LCD monitors to all variables. In 19" wide LCD monitors, only the lower frame bezel size had a significant effect, otherwise, lower, upper and side frame bezels appeared to be effective variables in 24" monitors. In order to reflect customer's affective preferences to new design of wide LCD monitors, this study is expected to provide quantitative ergonomic data and guidelines for the design of wide LCD monitor's bezel frame depth and size.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.149-158
• /
• 1995

This paper describes the development of a software tool LCD FRAME that may guide the analyzing process for the electrical characteristics and the design procedure for constructing the thin film transistor liquid crystal display(TFT/LCD) packages. LCD FRAME can analyze its electrical characteristics from the TFT/LCD system package configuration, and provide the design variables to meet the user's requirements. These analysis and design procedure can be done in real time according to the model at simplified package level of TFT/LCD. LCD_FRAME is an object-oriented expert system which considers package elements as objects. With this LCD_FRAME software tool, we analyzed the I-V characteristics of a-Si TFT and its signal distortion which has maximum 1.58 $\mu$s delay along the panel scan line of the package containing 480 ${\times}$ 240 pixels. We designed the package structure of maximum 6.35 $\mu$s signal delays and 3360 ${\times}$ 780 pixels, and as a result we showed that the proper structure of 20 $\mu$m scan line width, 60$\mu$m panel TFT gate width and 8 $\mu$m gate length. This LCD_FRAME software tool provides results of the analysis and the design in the form of input files of the SPICE program, text data files, and graphic charts.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.914-917
• /
• 2008

A quad-functional built-in test circuit has been developed for DRAM-frame-memory embedded SOG-LCDs. The quad function consists of memory test, display test, serial transfer test, and parallel transfer test which is the normal operation mode for our SOG-LCD. Results of memory and display tests are shown.

• Journal of Information Display
• /
• 제10권2호
• /
• pp.49-53
• /
• 2009

In this study, a very small LED packaging lead frame with a low thermal resistance was developed. The cost of the package process was reduced by the use of many small LED lamps, which increased the light emission efficiency. Compared to the large lead frame lamp, however, the optical property of the small LED packaging lead frame lamp was not sufficiently improved because its reflection structure was changed and its reflection area was reduced. The luminous efficiency of the LED lamp reaches 58 lm/W at the current density of 0.16 A/$cm^2$. Using the LED lamps, 46-inch LCD BLU was manufactured. The BLU-made LED lamps have a low power consumption of 146 W and have a slim (10-mm-thick) BLU, keeping good uniformity in terms of brightness, and maintaining good thermal properties.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.659-662
• /
• 2005

This paper presents a new technology, Advanced Dynamic Capacitance Compensation (A-DCC), for improved dynamic performance of LCD monitors. Conventional LCD monitors suffer from certain specific artifacts, such as wire-frame flicker and line dimming, which are not an issue for the simpler motion images found in television content. A-DCC addresses these more challenging monitor cases through an advanced architecture which analyzes multi-frame data and applies more comprehensive lookup table corrections according to the specific frame sequence.

• 대한전자공학회논문지SD
• /
• 제46권1호
• /
• pp.85-91
• /
• 2009

최근 LCD가 TV 시장에서 높은 점유율을 보이고 DMB, PMP 그리고 휴대폰과 같이 LCD를 디스플레이로 사용하는 휴대용 기기에서의 동영상 이용이 급격히 늘어나고 있다. LCD의 응답시간을 향상시킬 수 있는 방법의 하나로 Overdrive 기법이 있으나 프레임 메모리의 사용이 필수이기 때문에 메모리의 사용량이 많아진다. 본 논문에서는 Overdrive 기법에 사용되는 프레임 메모리 사용량을 줄이기 위하여 Color Conversion과 수정한 DWT-IDWT를 제안하였다. 이를 통해 화질의 큰 열화가 생기지 않으면서도 프레임 메모리의 사용량을 50%로 줄일 수 있었고, 기존의 방법과 비교하여 메모리 사용량의 약 15%를 더 줄일 수 있었다. 제안한 방법은 Xilinx FPGA로 구현하였고 메모리를 제외하고 2172개의 Slice가 사용되었다.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3654-3657
• /
• 2010

본 연구에서는 LCD 디스플레이 프레임의 제품 원가를 절감하기 위해 조립공정의 최적화에 대해 연구하였다. 첫째로 OTRS를 이용하여 조립공정의 효율성을 분석하였고, 둘째로 낮은 가격의 원자재 코일을 대상으로 정해진 신뢰성 기준에 합격할 수 있는 프레임을 생산할 수 있는지 평가하였다. 연구 결과, 프레임 조립공정은 자동화가 상당 수준 진척되었기 때문에 높은 생산성이 유지되고 있다는 것을 알 수 있었고, 동시에 정해진 기준에 합격할 수 있는 프레임을 확보할 수 있는 가능성이 제시되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.864-867
• /
• 2006

In order to satisfy with the clear visibility without any difficulties such as blurring and tailing, the high refreshing rate technology and fast response time of LC itself were applied to TFT-LCDs. In proportion to the decrease of holding time of 1 frame, the fast transition of LC behavior was necessary to both maintain the luminance and minimize the tailing appearance. The introduction of a new LC mixture for faster response times was realized by the good combination of newly introduced dielectrically neutral LC material so called 'Super Low Viscosity' (SLV) and highly polar $CF_2O-linkage$ LC material. This resulted in about a 20% reduction in the ${\gamma}_1$ of the new LC mixture compared to the references. In accordance with a new LC mixture with low ${\gamma}_1$, fast response time of 5ms has been made for S-IPS LCD TV application. Consequently, by applying the high frame frequency of 120Hz driving alongside the 5ms response time characteristics, the MPRT value was reduced by half.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1089-1092
• /
• 2007

New display technologies including LCD and plasma panels and Digital Light Projection (DLP) systems all offer large screens and impressive picture quality. However, flat-panel displays require a sophisticated picture processing to let these panels perform at their optimum levels. This paper explains why motion compensating techniques combined with frame rate conversion and quasi-impulse driving reduces motion blur and film judder for flat panel displays and presents the IC and its system application using this technique.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.98-102
• /
• 2006

Historically, LCD monitors have not been able to be used for frame-sequential stereoscopic 3D visualisation due to their slow pixel response rate. With LCD pixel response rates now in the single-digit millisecond range it is natural to ask whether it is now possible to achieve frame-sequential stereoscopic 3D viewing on LCDs.