• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1361-1362
• /
• 2009

We challenge to use reactive mesogen optical elements which can be coated inside LC cell. The reactive mesogens as retarder barrier requirements can be achieved between a high performance 2D mode and a low cross talk stereoscopic 3D mode. The fabrication of a 10.1" diagonal LCD which co-operates with a polarizer to from a parallax barrier, is described. In addition, the parallax barrier of reactive mesogens can easily control in mass production and can thus be coated as extremely LC cell, significantly reducing the thickness of LCD. Finally, we have successed to design a switchable 2D/3D displays using reactive mesogen optical elements which can be achieved 3D displays within glasses.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1220-1224
• /
• 2007

The effects of plasma damages to the organic thin film transistor (OTFT) during the fabrication process are investigated; metal deposition process on the organic gate insulator by plasma sputtering mainly generates the process induced damages of bottom contact structured OTFTs. For this study, various deposition methods (thermal evaporation, plasma sputtering, and neutral beam based sputtering) and metals (gold and Indium-Tin Oxide) have been tested for their damage effects onto the Poly 4-vinylphenol(PVP) layer surface as an organic gate insulator. The surface damages are estimated by measuring surface energies and grain shapes of organic semiconductor on the gate insulator. Unlike thermal evaporation and neutral beam based sputtering, conventional plasma sputtering process induces serious damages onto the organic surface as increasing surface energy, decreasing grain sizes, and degrading TFT performance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.293-296
• /
• 2004

We first report an application of plastic LCDs to 2D-3D convertible mobile phones. Plastic LCDs are proven to be most suitable solution for filter LCDs attached on main LCDs of 3D mobile phones in terms of quality and cost wises. The design and fabrication of plastic LCD filters are discussed in this paper.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1319-1322
• /
• 2007

Planar PIN photodiode is compatible with LTPS process, and its fabrication requires no additional manufacturing process. In this study we design the optimum dimension of PIN diodes with two nitride layers to improve the efficiency of PIN diodes. The PIN photo sensor shows very good sensitivity to ambient light illuminance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.42-45
• /
• 2002

Small sized LTPS TFT-LCDs are developed and evaluated. Sine the fabrication process is optimized for the productivity of huge glass substrate, the pattern size is above 5${\mu}m$. The panels with integrated digital data drivers are not satisfactory to compete with a-Si technology. Therefore, LTPS panels are implemented by PMOS technology and it is proved that they can be competitive with a-Si TFT-LCDs in terms of performance and cost.

• Journal of Information Display
• /
• v.8 no.3
• /
• pp.17-21
• /
• 2007

We introduce a new electrode structure for the patterned vertical alignment (PVA) mode, which has a lower color-shift at large viewing angle than the one-domain VA mode. By manipulating the period of electrode structure, we can make more multi-domains and use the existing fabrication processes without having to use additional materials.

• Journal of Information Display
• /
• v.2 no.4
• /
• pp.15-18
• /
• 2001

We report simple techniques to manufacture low-powered, high-resolution, reflective cholesteric displays using flexible plastic substrates. We use wax transfer printing to replace photo-lithography and incorporate polymer walls to increase the mechanical strength and lifetime of the displays. These printing methods can easily be adapted to roll-to-roll production.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.851-854
• /
• 2008

In order to reduce the manufacturing cost of TFT LCDs and cut down an amount facilities invested, there are many LCD panel makers contributes to convert the current Five-mask manufacturing process into the noble Four-mask fabrication process. We optimized the slit mask to improve the poor process reliability.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.2
• /
• pp.10-14
• /
• 2003

Flexible displays such as plastic-based liquid crystal displays (LCDs) and organic light-emitting diode displays (OLEDDs) have been researched and developed at KETI since 1997. The plastic film substrate is very weak to heat and pressure compared to glass substrate, that its fabrication process is limited to 110$^{\circ}C$ and low pressure. The ITO films were deposited on the bare plastic film substrate by rf-magnetron sputtering. Moreover, in order to maintain uniform cell gap and pressure on the plastic film substrate, we utilized newly-invented jig and fabrication process. Electro-optical characteristics were better than or equivalent to those of typical glass LCDs though it is thinner, lighter-weight, and more robust than glass LCDs.

• Journal of Sensor Science and Technology
• /
• v.12 no.1
• /
• pp.44-50
• /
• 2003

A security system consisted of an infrared sensor and PLD(Programmable Logic Device) was fabricated to prevent an intruder. The fabricated system detect the intruder using infrared sensor and has password key pad to permit someone to enter the house and office. The control circuit of the system is designed by VHDL(Very high speed integrated Hardware Description Language). The system was demonstrated in various conditions and the output signals were displayed in LCD, LED, buzzer and so on. This designed system in this paper has a advantage to supplement additional function with ease.