• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1993년도 추계학술발표회논문집
• /
• pp.71-75
• /
• 1993

The Modeling analysis and design of a high frequency LC-type series and LLCC-type parallel resonant converter oprating in the continous conduction is presented. The state-plane diagram representation of the converter response gives and good insight into the converter operation. A set of characterisric frequency are plotted which design parameters can be obtained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.127-132
• /
• 2002

Electricity living body formation operation appliance is using most imports until present. And, because electricity living body formation operation appliance is too expensive, it becomes burden to buy in small scale hospital. Also, problem that economical damage by income is added follows. Therefore, this treatise developed electricity living body formation operation appliance by home production. Ultra high frequency eruption circuit used LC circuit. and output frequency is possible to 8 [MHz], and output voltage amplified maximum 800 [V]. This operation appliance could display size of fixed current. This developed product could microscopic operation fewer than 1 [mm]. This development technology is considered by do metallic surface heat treatment, melting, welding, induction heating device and that can apply to domestic animals surgical operation and so on.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1873-1875
• /
• 1996

This paper deals with the lightning surge protective devices with combination of varistor and LC filter. UP to now, the varistor alone were used as overvoltage protection devices fer the AC power mains. In this work, in order to improve the cutoff performance of surge protective device, the hybrid circuit surge protective device for an AC single phase mains was designed and investigated. The first stage of hybrid circuit is to remove most of any large surge energy and protect the second stage components. The purpose of the second is to protect the load and increase the cutoff capacity of surge protective devices. Also LC filter attenuates the remnant that travels downstream from the first stage component and the high frequency noises. As a consequence, it was found that the proposed hybrid surge protective device for AC power mains has a variety of advantages such as low and tight clamping voltage, high frequency noise reduction and large cutoff capacity.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
• /
• pp.9-12
• /
• 1998

In this paper, the power factor correction circuit using a parallel drive method is proposed so that the high power inverter air-conditioner with 3[ph] compressor motor may obtain the cost down and the improved performance. The adequate design procedures are presented to reduce the material costs by eliminating the power factor improving LC filter and derating output capacitor and inverter switches. Using the determined components, the prototype circuit with 6[kW] power consumption is built and tested to verify the operation of the proposed circuit.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.205-208
• /
• 2001

A lumped electrical circuit is an approximate representation of the field within a curtain frequency range. The finite element modelling is a synonym of the equivalent circuit. The electric conduction field and electric potential wave field have been modelled by an admittance network and an LC low-pass filter network. Here in the present paper, the equivalent magnetic circuit representation is created for a magnetostatic field by the finite element modelling in two dimension.

• 전력전자학회논문지
• /
• 제26권6호
• /
• pp.411-420
• /
• 2021

In this paper, bidirectional LLC-LC resonant DC-DC converter with notch filters in the primary side of resonant circuits is proposed. Even if resonant capacitors are used on the primary and secondary sides, the proposed converter can operate with the high gain characteristics of the LLC resonant converter without mutual coupling of resonant capacitors, regardless of the direction of power flow. In addition, by applying notch filters, the proposed converter can operate with a wider gain control range and can cope with overload and short circuit. The analysis and operating characteristics of the proposed bidirectional LLC-LC resonant converter are investigated. A 3.3 kW prototyped bidirectional LLC-LC resonant converter connected to 750 V_DC buses is designed and tested to verify the validity and applicability of this proposed converter.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.814-819
• /
• 2010

This study proposes the antenna circuit design for the transmitting wireless power, the development of the RF non-contact type Dosimeter. That is, the study designed the optimization and numerical analysis of the antenna circuit for the antenna design of 13.56MHz over the frequency bands for transmitting wireless power. We studied the needed items in the existing RF type Dosimeter with battery to implement the wireless power non-contact Dosimeter within the battery. We compared to the real measurement value as calculating the value of the inductance and capacitance through the numerical analysis for the antenna LC resonance using the theory of the electromagnetic induction method. This method to drive low power is designed to simplify the circuit and to improve the efficiency of the rectifier. We convince our research contributes not only to understand the simplified circuit and miniaturization, but also to help the design and application technology of the wireless power transmit system which is received power supply with wireless.

• 한국전자파학회논문지
• /
• 제21권5호
• /
• pp.537-543
• /
• 2010

본 논문에서는 단일 DGS를 사용하여 다중의 주파수 대역을 억압할 수 있는 슬롯형 DGS를 제안하였다. 제안된 구조는 동일 평면 도파관 전송 선로(CPW: Coplanar Waveguide)의 접지 면에 서로 다른 크기의 맴돌이 형태의 슬롯 DGS들을 신호 선에 대하여 횡축으로 삽입하여, 다중 주파수 대역을 억압할 수 있도록 설계되었다. 제안된 구조를 제작하였으며, 시뮬레이션 결과와 측정된 결과가 상당 부분 일치하는 것을 확인하였다. 또한 제안된 구조에 대한 등가 회로 모델을 제시하였다. 제안된 등가 회로는 접지 면에 위치한 DGS를 LC 공진기들로 표현하였으며, 이러한 공진기들이 신호선과 자기적으로 결합한 것으로 모델링 하였다. 등가 회로를 해석하여 다중의 공진 주파수 특성이 나타남을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제45권1호
• /
• pp.50-55
• /
• 2008

본 논문에서는 $0.35-{\mu}m$ CMOS 공정을 이용 $8{\sim}10.9$ GHz 밴드를 갖는 새로운 구조의 LC VCO를 설계 제안하였다. 이 회로 구성은 LC 탱크 기반의 전형적인 NMOS, PMOS cross-coupled 쌍을 병렬로 구성한 새로운 구조로 상보적인 NMOS와 PMOS 꼬리 전류와 같은 MOS cross-coupled쌍과 출력 버퍼로 구성하였다. 본 논문에서 제시한 구조로 설계된 LC VCO는 8GHz에서 10.9GHz까지로 29%의 증가된 튜닝 범위와 6.48mV의 낮은 전력소모를 가지는 것을 확인하였고 이의 core size는 $270{\mu}m{\times}340{\mu}m$, 시뮬레이션을 통한 VCO의 위상잡음은 1MHz와 10MHz offset에서 각각 -117dBc/Hz와 -137dBc/Hz이다. FOM은 10GHz의 중심 주파수으로 부터 1MHz offset에서 -189dBc/Hz를 가진다. 제안한 설계방법은 10Gb/s급의 클럭과 데이터 복원회로 그리고 SONET 통신응용에 매우 유용하다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.185-188
• /
• 1998

The recent flurry of activities and interest in Switched Reluctance Motor(SRM) has focused attention on various issues associated with implementing the SRM in the mass commertial Market. One such issue is the noise generated by radial force. In this paper, we proposed the circuit to reduce the noise of SRM using LC Resonant characteristic. The usefulness of proposed circuit is verified by experimental result.