• Journal of Pharmaceutical Investigation
• /
• v.38 no.1
• /
• pp.57-61
• /
• 2008

A HPLC-ELSD method was developed to determine saikosaponin derivatives from Bupleuri Radix. Eight saikosaponins, saikosaponin c, i, h, a, $b_2$, g, $b_1$ and d, were analyzed under optimized HPLC conditions [column: Eclipse XDB $C_{18}$ ($150{\times}4.6mm$ i.d., $5{\mu}m$; mobile phase: $H_2O$ with 0.1% $CH_3$COOH (v/v) for solvent A and AcCN with 0.1% $CH_3$COOH (v/v) for solvent B, gradient elution; flow rate: 1mL/min; injection volume: $20{\mu}L$]. Good linearity was achieved in the range from 62.5 to $250{\mu}g/mL$ for each compound, and intra-day precision and accuracy at each concentration level varied between 0.05 and 5.45% and between 93.9 and 109.6%, respectively, whereas those for inter-day variations were between 0.91 to 2.73% and 94.3 to 106.1%. This HPLC-ELSD method was applied for the determination of sakosaponins from Bupleuri Radix samples, and saikosaponin a $(0.79{\pm}0.20mg/g)$, c $(0.33{\pm}0.06mg/g)$ and d $(0.48{\pm}0.15mg/g)$ were observed as major compounds. The other saikosaponins were shown under limit of quantification level thus couldn't be quantified. The present study suggested that the introduced HPLC-ELSD method is selective and reliable, and not only saikosaponin a, but also saikosaponin c and d should be employed as the standard markers for Bupleuri Radix.

• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.106-106
• /
• 2002

This study investigated variations of micro-structures and mechanical properties of Ti / STS321L joint with various bonding temperature and time using brazing method. According to increasing bonding temperature and time, it was observed that the thickness of their reaction layer increased due So increasing diffusion rate and time. From the EPMA results, Ti diffused to the STS321L substrate according to increasing bending time to 30min. Hardness of bonded interface increased with increasing bonding temperature and time due to increasing their oxides and intermetallic compounds. XRD data indicated that Ag, Ag-Ti intermetallic compounds, TiAg and Ti₃Ag and titanium oxide, TiO₂were formed in interface. In tensile test, it was found that the tensile strength had a maximum value at the bonding temperature of 900℃ and time of 5min, and tensile strength decreased over bonding time of 5min. The critical thickness of intermetallic compounds was observed to about 30㎛, because of brittleness from their excessive intermetallic compounds and titanium oxide, and weakness from void.

• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.830-837
• /
• 2002

This study investigated variations of micro-structures and mechanical properties of Ti / STS321L joint with various bonding temperature and time using brazing method. According to increasing bonding temperature and time, it was observed that the thickness of their reaction layer increased due So increasing diffusion rate and time. From the EPMA results, Ti diffused to the STS321L substrate according to increasing bending time to 30min. Hardness of bonded interface increased with increasing bonding temperature and time due to increasing their oxides and intermetallic compounds. XRD data indicated that Ag, Ag-Ti intermetallic compounds, TiAg and $Ti_3Ag$ and titanium oxide, $TiO_2$ were formed in interface. In tensile test, it was found that the tensile strength had a maximum value at the bonding temperature of $900^{\circ}C$ and time of 5min, and tensile strength decreased over bonding time of 5min. The critical thickness of intermetallic compounds was observed to about $30\mu\textrm{m}$, because of brittleness from their excessive intermetallic compounds and titanium oxide, and weakness from void.

• Journal of Dairy Science and Biotechnology
• /
• v.40 no.1
• /
• pp.15-22
• /
• 2022

This study evaluated the levels of D(-)-lactate and L(+)-lactate, and the ratio of D(-)-lactate to total lactate (D(-)-lactate + L(+)-lactate) of 15 lactic acid bacteria (LAB) using an enzymatic method. D(-)-lactate and L(+)-lactate levels in the LAB ranged from 0.31 to 13.9 mM and 0.76 to 39.3 mM, respectively, in Bifidobacterium sp.; 1.08 to 11.7 mM and 0.69-13.0 mM in Lactobacillus sp.; 0.72 to 20.3 mM and 0.98 to 32.3 mM in Leuconostoc sp., and 33.0 mM and 39.2 mM in Pediococcus acidilacti KCCM 11747. The ratio of the range of D(-)-lactic acid to total lactic acid was 28.98%-45.76% in Bifidobacterium sp., 41.18%-61.02% in Lactobacillus sp., 29.85%-42.36% in Leuconostoc sp., and 45.71% in P. acidilacti KCCM 11747. In the future, there is a need to test for D(-)-lactate in various fermented products to which different LAB have been added and study the screening of LAB used as probiotics that produce various concentrations of D(-)-lactate.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.4
• /
• pp.375-379
• /
• 1999

Volatile components of Cornsilk(Zea mays L.) were isolated by purge and trap headspace method and were analyzed by GC and GC/MSD. A total of 44 components were identified in the cornsilk volatile coponents including 9 alcohols 7 aldehydes and ketones 14 terpenes and terpene alcohols 3 pyrazines 5 hydrocarbons and 6 miscellaneous components. The major components were 2-propanol(8.08%) pen-tanol(1.82%) hexanol(2.86%) hexanal(3.68%) heptanal(7.40%) nonanal(7.93%) decanal (2.04%) $\alpha$-copaene(2.20%) limonene(1.68%) $\alpha$-selinene(1.03%) $\beta$-selinene(1.03%)

• Bulletin of the Korean Chemical Society
• /
• v.19 no.7
• /
• pp.766-770
• /
• 1998

On-line preconcentration by direct precipitation with hydroxide has been developed and applied for the analysis of Cd in Inductively Coupled Plasma Atomic Emission Spectrometry. Cadmium is continuously precipitated with hydroxide and dissolved by nitric acid in on-line mode. Currently, the enrichment factor is more than 90 times for 20.0 mL of sample and could be further increased very easily. For a large sample throughput, 1.0 mL of sample loop is used and the enrichment factor is 4.5 with the sampling speed of 15/hr. The method has been applied to the analysis of NIST reference sample and has yielded good results with the certified value.

• Membrane Journal
• /
• v.29 no.3
• /
• pp.140-146
• /
• 2019

In this study, a selective layer of poly styrene sulfonic acid (PSSA) and polyethyleneimine (PEI) was formed by layer-by-layer method onto a porous polyacrylonitrile (PAN) hollow fiber membrane as the suppoter membrane. The salting out method was used by adding Mg salt to the coating solution. Several experimental conditions of the ionic strength, polymer concentration, and coating time were investigated, and the flux and rejection were measured at the operating pressure of 2 atm for 100 mg/L of NaCl, $MgCl_2$, and $CaSO_4$ as the feed solution. The membranes coated with PSSA 20,000 ppm, coating time 3 minutes, ionic strength 1.0, PEI 30,000 ppm, coating time 1 minute, and ionic strength 0.1 were observed the best. In the 100 ppm NaCl, $MgCl_2$, and $CaSO_4$ feed solutions, the flux of 20.4, 19.4, and 18.7 LMH, and the rejection of 67, 90, and 66.6%, respectively.

• Clean Technology
• /
• v.7 no.1
• /
• pp.27-34
• /
• 2001

The waste slurry generated from CMP process contains particulate and heavy metals. It is hard to treat the waste slurry by conventional treatment method because the particulates in the waste are too fine to be easily separated the solid from the waste for the purpose of water recycling. The investigation was focused on finding the optimum condition of coagulation with two different coagulants. When the solid content in the waste slurry solution was 0.1wt%, the optimal ranges of pH and PACl concentration were 4~6 and 20~50 mg/L, respectively. When the solid content was increased to 0.5wt%, the optimal condition was 4~5 for pH and 50~100 mg/L for PACl concentration.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.4
• /
• pp.383-390
• /
• 2016

Objective: Gymnastics on rings needs a high level of muscle strength with balance ability for controlling the body. A study on a new balance training program is necessary for elite gymnasts. Therefore, the purpose of this study was to investigate the effects of an 8-week pilates core-muscle training on balance ability and asymmetry index of the L-sit on the rings in male elite gymnasts. Method: Ten elite gymnasts (age: $20.6{\pm}0.7years$, height: $169.9{\pm}4.9cm$, weight: $65.4{\pm}5.6kg$, career duration: $20.6{\pm}0.7years$), who are students at K-university, participated in this study. Results: First, the range of the COM tended to decrease in the anterior-posterior direction. Second, the left hip joint angle and knee extension and ankle dorsiflexion angles significantly increased after the pilates training. Third, the ROM also increased. Fourth, the symmetry value increased in the hip angle, while the symmetry index in all joints of the ROM decreased. As a result, the pilates core-muscle training influenced the static balance ability during the L-sit on the rings. Conclusion: Accordingly, the pilates core-muscle training is suitable in enhancing the basic balance ability in gymnastics on rings.

• Mass Spectrometry Letters
• /
• v.13 no.1
• /
• pp.20-25
• /
• 2022

Fargesin, a tetrahydrofurofuranoid lignan isolated from Flos Magnoliae, shows anti-inflammatory, anti-oxidative, anti-allergic, and anti-hypertensive activities. To evaluate the pharmacokinetics of fargesin in mice, a sensitive, simple, and selective liquid chromatography-high resolution mass spectrometric method using electrospray ionization and parallel reaction monitoring mode was developed and validated for the quantification of fargesin in mouse plasma. Protein precipitation of 6 µL mouse plasma with methanol was used as sample clean-up procedure. The standard curve was linear over the range of 0.2-500 ng/mL in mouse plasma with the lower limit of quantification level at 0.2 ng/mL. The intra- and inter-day coefficient variations and accuracies for fargesin at four quality control concentrations including were 3.6-11.3% and 90.0-106.6%, respectively. Intravenously injected fargesin disappeared rapidly from the plasma with high clearance values (53.2-55.5 mL/min/kg) at 1, 2, and 4 mg/kg doses. Absolute bioavailability of fargesin was 4.1-9.6% after oral administration of fargesin at doses of 1, 2, and 4 mg/kg to mice.