Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지

Variations of Micro-Structures and Mechanical Properties of Ti/STS321L Joint Using Brazing Method

브레이징을 이용한 Ti/STS321L 접합체의 미세조직과 기계적 특성의 변화

  • Published : 2002.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study investigated variations of micro-structures and mechanical properties of Ti / STS321L joint with various bonding temperature and time using brazing method. According to increasing bonding temperature and time, it was observed that the thickness of their reaction layer increased due So increasing diffusion rate and time. From the EPMA results, Ti diffused to the STS321L substrate according to increasing bending time to 30min. Hardness of bonded interface increased with increasing bonding temperature and time due to increasing their oxides and intermetallic compounds. XRD data indicated that Ag, Ag-Ti intermetallic compounds, TiAg and $Ti_3Ag$ and titanium oxide, $TiO_2$ were formed in interface. In tensile test, it was found that the tensile strength had a maximum value at the bonding temperature of $900^{\circ}C$ and time of 5min, and tensile strength decreased over bonding time of 5min. The critical thickness of intermetallic compounds was observed to about $30\mu\textrm{m}$, because of brittleness from their excessive intermetallic compounds and titanium oxide, and weakness from void.

Keywords

References

  1. 대한용접학회 : 용접 . 접합 편람. 대한용접학회, (1998), 143-169, 278-287 (in Korean)
  2. 이종문 : 금속리사이클링공학. 세종출판사. (1997). 267-273 (in Korean)
  3. 허선무 : Military Applications of Titanium (I), Trends in Metals & Materials Engineering. 13-1(2000). 96-105
  4. Peng He. Jiuhai Zhang. Ronglin Zhou, and Xiaoqiang Li : Diffusion Bonding Technology of a Titanium Alloy to a Stainless Steel Web with an Ni Interlayer, Materials Characterization. 43(1999). 287-292
  5. Qi Yunlian, Deng .Iu. Hong Quan and Zeng Living : Electron Beam Welding. Laser Beam Welding and Gas Tungsten Arc Welding of Titanium Sheet. Materials Science and Engineering A, 280(2000), 177-181
  6. S. Lathabai, B.L. Jarvis, K.J. Barton : Comparison of Keyhole and Conventional Gas Tungsten Arc Welds in Commercially Pure Titanium. Materials Science and Engineering A. 299(2001). 81-93
  7. A. J. Sedriks : Corrosion of Stainless Steels. John Weley & Sons Inc .. (1996). 14
  8. 한봉희 역: (조직과 성질을 주로한)금속재료, 회중당, (1988), 292 (in Korean)
  9. B. Aleman, 1. Gutierrez and J.J. Urcola : The Use of Kirkendall Effect for Calculating Intrinsic Diffusion Coefficients in a 316L/Ti6242 Diffusion Bonded Couple, Scripta Materialia, Elsevier Science Ltd, 36-5(1997), 509-515
  10. RR Wang and G.E. Welsch : Joining Titanium Materials with Tungsten Inert Gas Welding, Laser Welding, and Infrared Brazing, The Journal of Prosthetic Dentistry, Novembert l Ssfi). 521-530
  11. H. W. Anselm Wiskott et al. : Microstructures of Brazings and Welds Using Grad 2 Commercially Pure Titanium, The International Journal of Prosthodontics, 14-1(2001), 40-47
  12. w.Y. Kim, B. H. Jung and S. Y. Lee : A Characteristic of Microstructures in Bonding Interlayer of Brazed Titanium to Copper, Journal of KWS, 13-3(1995),106-115 (in Korean)
  13. P.R.C. Camargo et al. : Microstructural Characterization of Titanium to 304 Stainless Steel Brazed Joints, Welding Journal, 72-12( 1993), 537-544
  14. 이지환, 이정중, 김병일, 배차헌 : 비철금속재료, 원창출판사, (1993), 428-433 (in Korean)
  15. M. Nagai et al. : "Titanium' 80", AIME, 2(1981), 1109
  16. Jeong-Heon Kim. Jeong-Tag Woo and Yeon-Chul Yoo : A Study of Interfacial Structure and Bond Strength of SbN4/Ni-Cr Steel Joint, Journal of the Korean Institute of Metals and Materials, 32-2 (1994), 224-232 (in Korean)
  17. William H, Cubberly et al. : vol. 3. Properties and selection stainless steels, tool materials and specialpurpose metals, Metals Handbook 9th Edition, American Society for Metals, (1978), 372-412