Variations of Micro-Structures and Mechanical Properties of Ti/STS321L Joint Using Brazing Method

브레이징을 이용한 Ti/STS321L 접합체의 미세조직과 기계적 특성의 변화

  • Published : 2002.12.01

Abstract

This study investigated variations of micro-structures and mechanical properties of Ti / STS321L joint with various bonding temperature and time using brazing method. According to increasing bonding temperature and time, it was observed that the thickness of their reaction layer increased due So increasing diffusion rate and time. From the EPMA results, Ti diffused to the STS321L substrate according to increasing bending time to 30min. Hardness of bonded interface increased with increasing bonding temperature and time due to increasing their oxides and intermetallic compounds. XRD data indicated that Ag, Ag-Ti intermetallic compounds, TiAg and Ti₃Ag and titanium oxide, TiO₂were formed in interface. In tensile test, it was found that the tensile strength had a maximum value at the bonding temperature of 900℃ and time of 5min, and tensile strength decreased over bonding time of 5min. The critical thickness of intermetallic compounds was observed to about 30㎛, because of brittleness from their excessive intermetallic compounds and titanium oxide, and weakness from void.

Keywords

References

  1. 대한용접학회 용접·접합 편람 대한용접학회
  2. 금속리사이클링공학 이종문
  3. Trends in Metals & Materials Engineering v.13-1 Military Applications of Titanium(1) 허선무
  4. Materials Characterization v.43 no.5 Diffusion Bonding Technology of a Titanium Alloy to a Stainless Steel Web with an Ni Interlayer Peng He;Jiuhai Zhang;Ronglin Zhou;Xiaoqiang Li https://doi.org/10.1016/S1044-5803(99)00008-X
  5. Materials Science and Engineering A v.280 no.1 Electron Beam Welding, Laser Beam Welding and Gas Tungsten Arc Welding of Titanium Sheet Qi Yunlian;Deng Ju;Hong Quan;Zeng Liying https://doi.org/10.1016/S0921-5093(99)00662-0
  6. Materials Science and Engineering A v.299 no.1-2 Comparison of Keyhole and Conventional Gas Tungsten Arc Welds in Commercially Pure Titanium S. Lathabai;B.L. Jarvis;K.J. Barton https://doi.org/10.1016/S0921-5093(00)01408-8
  7. Corrsion on Stainless Steels A.J. Sedriks
  8. (조직과 성질을 주로한) 금속재료 한봉희
  9. Scripta Materialia v.36-5 The Use of Kirkendall Effect for Calculating Intrinsic Diffusion Coefficients in a 316L/Ti6242 Diffusion Bonded Couple B. Aleman;I. Gutierrez;J.J. Urcola
  10. The Journal of Prosthetic Dentistry Joining Titanium Materials with Tungsten Inert Gas Welding, Laser Welding, and Infrared Brazing R.R. Wang;G.E. Welsch
  11. The International Journal of Prosthodontics v.14-1 Microstructures of Brazings and Welds Using Grad 2 Commercially Pure Titanium H.W. Anselm Wiskott(et al.)
  12. Journal of KWS v.13-3 A Characteristic of Microstructures in Bonding Interlayer of Brazed Titanium to Copper W.Y. Kim;B.H. Jung;S.Y. Lee
  13. Welding Journal v.72-12 Microstructural Characterization of Titanium to 304 Stainless Steel Brazed Joints P.R.C. Camargo(et al.)
  14. 비철금속재료 이지환;이정중;김병일;배차헌
  15. Journal of the Korean Institute of Metals and Materials v.232-2 A Study of Interfacial Structure and Bond Strength of Si₃N₄/Ni-Cr Steel Joint Jeong Heon Kim;Jeong Tag Woo;Yeon Chul Yoo
  16. Titanium 80 v.2 M. Nagai(et al.)
  17. Metals Handbook 9th Edition v.3 Properties and selection stainless steels, tool materials and special purpose metals William H. Cubberly(et al.)